Business Aviation
Bridger Aerospace Integrates TracPlus FireFlyte Across Fleet
Bridger Aerospace adopts TracPlus FireFlyte to automate mission data capture across its aerial firefighting fleet for 2026.

Bridger Aerospace Group Holdings, Inc. has integrated the TracPlus FireFlyte platform across its entire aerial firefighting fleet to automate mission data capture ahead of the peak 2026 fire season.
Announced on June 30, 2026, in a joint press release, the agreement transitions the operator from manual estimation to automated tracking of drop locations, flight paths, and aircraft performance. The integration aligns the private contractor with data standards currently utilized by major government agencies.
Fleet-wide integration and data capabilities
The FireFlyte software will unify data across Bridger Aerospace’s mixed fleet. This includes six CL-415EAF Super Scooper amphibious Commercial-Aircraft, which can draw up to 1,412 gallons of water per pass. The system will also track the company’s Air Attack and Multi-Mission aircraft, which include Pilatus PC-12, Beechcraft King Air 350, and Daher Kodiak turboprops equipped with imaging and infrared systems.
FireFlyte records mission parameters automatically from the moment an aircraft becomes airborne until it lands. Captured data includes position, time, firefighting mode, and drop lines. The system generates an Aerial Firefighting Report at the source, eliminating the need for post-flight reconstruction.
By bringing all aircraft onto a single operational picture, a CL-415EAF on a suppression run and an Air Attack aircraft providing overhead coordination appear in the same view for pilots, ground coordinators, and agency partners.
“For Bridger, the goal is not just operational awareness, but also continuous improvement. Mission data from FireFlyte allows us to make sure every aircraft, on every fire, is performing at the highest possible level. Fireflyte also enhances our situational awareness so we can increase our focus on safe operations by using data to highlight trends and maintain our high tempo in the field. This visibility gives us the best possible data to perform our mission to protect what matters: lives, property, and the environment,” said Sam Davis, Chief Executive Officer of Bridger Aerospace.
Aligning with government agency standards
The adoption of automated mission recording reflects a broader shift in the aerial firefighting sector. Government entities, including the California Department of Forestry and Fire Protection (CAL FIRE) and Australia’s national firefighting program, have already mandated complete automated mission records.
TracPlus Global Chief Executive Officer Todd O’Hara, who assumed his role on May 1, 2026, noted that private operators are now adopting the same standards to improve safety and efficiency.
“The industry is shifting toward automated, complete mission records. Agencies like CAL FIRE and Australia’s national program are already there. What’s changing now is that operators are making the same move. Bridger is leading that from the front. By capturing every mission automatically, the same way the major agencies do, they can focus on what they do best; flying the mission and keeping communities safe,” O’Hara said.
AirPro News analysis
We view the integration of automated data capture as a necessary evolution for private aerial firefighting contractors. As federal and state agencies demand higher accountability for contract performance, the ability to prove drop efficacy and sequence tracking becomes a competitive advantage. Bridger Aerospace’s move to unify its CL-415EAF suppression aircraft and its intelligence-gathering turboprops into a single data stream reduces the communication friction between overhead coordination and active drop assets. This level of transparency is likely to become a baseline requirement for future federal firefighting contracts.
Sources: TracPlus
Photo Credit: Bridger Aerospace
Business Aviation
Infinity Aviation Group Acquires FBO at Trenton-Mercer Airport
Infinity Aviation Group expands into the NYC metro area with the acquisition of the FlightServ FBO at Trenton-Mercer Airport, NJ.

Infinity Aviation Group has expanded its fixed base operations (FBO) network into the New York metropolitan area with the acquisition of the FlightServ facility at Trenton-Mercer Airports (TTN) in New Jersey.
Announced in an August 19, 2026, press release, the acquisition marks the third location for Infinity Aviation Group. The Trenton facility joins the company’s existing operations in Nashua, New Hampshire, and Vero Beach, Florida. The move positions the company to capture business aviation traffic seeking uncongested alternatives to Teterboro and Morristown airports.
Facility specifications and capabilities
The FlightServ facility at Trenton-Mercer Airport was completed in 2023. The complex features a 30,000-square-foot FBO terminal and 80,000 square feet of climate-controlled hangar space. The hangars are equipped with 28-foot doors, allowing the facility to accommodate the largest business aviation aircraft currently in service.
Trenton-Mercer Airport features a 6,000-foot primary runway and operates without slot restrictions. The airport also maintains on-site U.S. Customs and Border Protection (CBP) capabilities for international arrivals.
“Trenton sits in one of the busiest business aviation markets in the country, and with the addition of this site, Infinity will be able to better serve the New York metropolitan business aviation community,” said Steven Levesque, CEO of Infinity Aviation Group.
Levesque noted that the company plans to invest further in the Trenton operation by adding hangar capacity and expanding ramp capabilities.
Continuity for charter and maintenance operations
While Infinity Aviation Group has acquired the FBO business, the founding ownership of FlightServ will maintain a presence at the airport. Aviation Charters, a Part 135 charter and aircraft management business operated by the founders, will remain on-site to provide charter, management, and maintenance services.
The existing FlightServ FBO staff will transition to Infinity Aviation Group. According to Levesque, the retention of the local team is part of a broader strategy to maintain service continuity while integrating the location into the company’s East Coast network.
AirPro News analysis
We view Infinity Aviation Group’s acquisition at Trenton-Mercer Airport as a strategic play for the congested Northeast corridor. As Teterboro Airport and Westchester County Airport continue to face capacity constraints, slot restrictions, and noise abatement pressures, satellite airports like TTN become increasingly valuable for business aircraft operators. By securing a recently built facility with large-cabin hangar capacity and on-site customs, Infinity establishes a highly capable relief valve for New York and Philadelphia traffic. Linking New Hampshire, New Jersey, and Florida also aligns directly with the dominant North-South corporate and private travel patterns on the Eastern Seaboard.
Sources: Infinity Aviation Group
Photo Credit: FlightServ
Business Aviation
FTAI Aviation Closes $2B Warehouse Financing for 2026 SPV
FTAI Aviation secures $2B warehouse facility for mid-life 737NG and A320ceo acquisitions, reaching $5.5B in total Strategic Capital financing.

FTAI Aviation Ltd. has secured a $2.0 billion warehouse financing facility to fund the acquisition of mid-life Boeing 737NG and Airbus A320ceo aircraft through its second Strategic Capital investment vehicle. The transaction closed on August 14, 2026, bringing the company’s total warehouse financing for its Strategic Capital business to $5.5 billion in under two years.
Announced in a press release on August 17, 2026, the financing supports the newly launched 2026 Special Purpose Vehicle (SPV). The facility includes a $1.0 billion accordion feature, providing a potential total capacity of $3.0 billion. A syndicate of 13 financial institutions participated in the transaction, highlighting market support for FTAI’s strategy of pairing asset ownership with in-house engine maintenance capabilities.
Expanding the Strategic Capital portfolio
The 2026 SPV follows the deployment of FTAI’s inaugural vehicle, the 2025 SPV, which launched in October 2025. That initial vehicle raised $2.0 billion in equity commitments and has since committed approximately $6.0 billion across more than 300 aircraft.
Kallie Steffes, Head of Strategic Capital at FTAI Aviation, noted that the inaugural vehicle is now in its harvest phase and described the new financing as a continued execution of the company’s business plan.
“We are grateful to our lending partners, whose support reflects growing confidence in our platform as we carry this momentum and a robust pipeline of new acquisitions into the 2026 SPV,” Steffes stated in the release.
Financial performance and syndicate details
The launch of the 2026 SPV aligns with a period of revenue growth for the New York-based lessor. On July 29, 2026, FTAI reported second-quarter Aerospace Products revenue of $875.0 million, representing a 78 percent year-over-year increase. During that earnings report, the company confirmed the 2026 SPV had already begun making aircraft acquisition commitments.
The $2.0 billion facility was supported by a diverse banking syndicate. Participating institutions include ATLAS SP Partners, Deutsche Bank, Apple Bank, BNP Paribas, Citibank, Citizens Bank, Goldman Sachs, MUFG Bank, PNC Bank, Royal Bank of Canada, Standard Chartered, Truist Bank, and U.S. Bank.
AirPro News analysis
We view FTAI Aviation’s rapid scaling of its Strategic Capital vehicles as a direct response to the sustained industry demand for mid-life narrowbody Commercial-Aircraft. With ongoing Supply-Chain constraints and Deliveries delays affecting new-generation Boeing 737 MAX and Airbus A320neo family aircraft, operators are extending the lives of their existing Boeing 737NG and Airbus A320ceo fleets. FTAI’s model of combining aircraft leasing with internal engine maintenance capabilities positions the company to capitalize on the high utilization rates of these mature platforms. Securing $5.5 billion in warehouse financing across two vehicles in less than 24 months underscores strong institutional confidence in this integrated aftermarket strategy.
Photo Credit: FTAI Aviation
Business Aviation
StandardAero Adds Bombardier Global MRO at Van Nuys Airport
StandardAero expands Van Nuys MRO capabilities to include Bombardier Global aircraft, covering airframe, avionics, engine, and structures services.

StandardAero has expanded its maintenance, repair, and overhaul (MRO) capabilities at Van Nuys Airport (VNY) to include the Bombardier Global aircraft family, establishing a new comprehensive service hub for West Coast business aviation operators.
Announced in a press release on August 20, 2026, the expansion marks a diversification for the California facility, which has specialized in Gulfstream airframes for over 25 years. The addition targets a growing market segment, with StandardAero noting that more than 600 of the 1,200 delivered Bombardier Global aircraft currently operate in North-America.
Expanding capabilities at Van Nuys
The VNY facility is now equipped to support multiple variants within the Bombardier Global family, including the Bombardier Global Express, Bombardier Global Express XRS, Bombardier Global 5000, Bombardier Global 6000, and Bombardier Global 7500. Services offered encompass airframe, avionics, structures, and engine maintenance.
Prior to the official announcement, StandardAero had already commenced support for Bombardier Global operators at the location. Initial work scopes have included routine inspections, repair events, and the installation of SpaceX Starlink satellite communications systems on Bombardier Global 5000 aircraft.
“Our customers want a trusted maintenance partner that can support the entire aircraft. With airframe, avionics, engine, structures and interior capabilities all under one roof and across our network, we’re continuing to build that CompleteCare, comprehensive support solution for Global operators,” said Roland Scensnovic, Vice President and General Manager of StandardAero’s Van Nuys facility.
Engine support and network integration
A critical component of the expanded service offering is engine maintenance. As an authorized service center for Rolls-Royce, StandardAero is leveraging its VNY location to perform line maintenance on Rolls-Royce BR710 engines, which power the majority of the Bombardier Global fleet. This engine support is available both on-site at the airport and through the company’s Mobile Service Team (MST).
“Our Van Nuys site has decades of Gulfstream MRO experience, and we’re excited to enhance our service offering by adding another large cabin aircraft with the Global family by investing further in our current team and in tooling to support these aircraft,” stated Giovanni Spitale, President of StandardAero Business Aviation.
The Van Nuys expansion integrates with StandardAero’s broader network of business aviation facilities. The company also supports Bombardier Global aircraft at its Springfield, Illinois (SPI) location, which provides Federal Aviation Administration (FAA) Organization Designation Authorization (ODA) and dedicated engineering services. The VNY facility itself holds certifications from the FAA, the EASA, the Federal Civil Aviation Agency (AFAC) of Mexico, and Transport Canada Civil Aviation (TCCA).
AirPro News analysis
The integration of Bombardier Global services at Van Nuys represents a logical maturation of StandardAero’s West Coast strategy following its 2023 acquisition of Western Jet Aviation. Western Jet Aviation, founded at VNY in 1999, built its reputation almost exclusively on Gulfstream maintenance. By injecting capital into tooling and personnel to support the Bombardier Global family, StandardAero is maximizing the utility of its footprint at one of the busiest business aviation airports in the world.
For StandardAero, which began trading on the New York Stock Exchange (NYSE: SARO) in October 2024, expanding capabilities at existing facilities provides a clear path to revenue growth. Capturing maintenance events for ultra-long-range aircraft like the Bombardier Global 7500 requires significant technical investment, but it secures access to a high-margin operator base that demands comprehensive, single-stop service solutions.
Sources: StandardAero
Photo Credit: StandardAero
-
UAV & Drones3 days agoDufour Aerospace Aero-200 eVTOL Targets 2027 Serial Production
-
Route Development4 days agoMWAA Approves $15.5B Budget for Washington Dulles Overhaul
-
Airlines Strategy6 days agoGoogle Buys Spirit Airlines Data for $10M to Train AI
-
Defense & Military6 days agoUSAF Awards GE Aerospace and Kratos EMD Contract for F143-ZZ-100
-
Technology & Innovation5 days agoAmpaire Raises $19M Series B for Hybrid-Electric Certification
