MRO & Manufacturing
Robinson Extends R66 12-Year Inspection Interval to 15 Years
Robinson has moved the R66’s major calendar-based inspection from 12 to 15 years, citing more than 2.5 million fleet flight hours.

Robinson Helicopter Company has extended the R66’s 12-year inspection to 15 years, giving owners and operators three more years before the turbine helicopter’s major calendar-based inspection.
The Torrance, California, manufacturer announced the change in a press release dated November 19, 2026. It said the longer interval reflects the R66’s durability and its continuing review of maintenance and overhaul data, and that the R66 fleet has accumulated more than 2.5 million flight hours since certification in 2010. Robinson also said its internal technical materials report zero in-flight shutdowns to date.
What the longer interval changes for owners and shops
Robinson presented the change as an ownership-cost measure. According to the release, three extra years between calendar-driven inspections can lower the maintenance burden, extend aircraft availability and improve long-term ownership value for operators who fly fewer hours each year. The company said the move is part of a broader effort to use field experience, engineering data and product improvement to lower ownership costs while keeping its focus on safety, reliability and maintainability.
The release does not list which tasks or components the 15-year interval covers. It directs owners and operators to the latest Robinson technical publications and the R66 Maintenance Manual on Robinson’s website for current requirements and applicability, and links a document titled “R66 Maintenance Manual Update November 2026.”
What the earlier manual said about 12 years
The release describes the change only in calendar terms and sets no hour limit. In the version of Chapter 1 of the R66 Maintenance Manual that Robinson posted in November 2023, the scheduled inspection table lists a “2000-hour/12-year inspection” under § 5-50. That chapter counts the 12 years from the factory-issued airworthiness certificate, the factory-issued release tag (FAA Form 8130-3) or the last 12-year inspection.
The same chapter lists components to be removed when they reach 12 years in service with less than 2,000 hours since new, since last overhaul or since the last 12-year maintenance. Among them are the main rotor blade and spindle assembly, the main rotor gearbox, the clutch and the swashplate, each sent for 12-year maintenance or inspection, or replaced. The manual states that component maintenance may only be performed at an RHC-authorized Service Center that has the required special tools. Engine maintenance is handled separately, under the RR300 Operation and Maintenance Manual.
David Smith, President and CEO of Robinson Helicopter Company, tied the decision to the fleet’s service history:
“Reliability isn’t something you claim. It is something you prove over time, and the R66 fleet has done exactly that.”
Smith said the change draws on what Robinson has learned from more than 15 years of R66 service, and described the helicopter as “dependable, versatile and economical.”
A run of R66 life extensions since 2024
The new interval follows earlier service-life changes on the type. On September 5, 2024, Robinson announced FAA approval to double the service life of twelve selected R66 components from 2,000 to 4,000 hours, five of them in the main rotor gearbox. The same approval raised the calendar life of the R66 main and tail rotor blades from 12 to 15 years. Robinson said at the time that the change should lower operating costs by 6% and reduce the hourly reserve for overhauls by 25%.
In a release dated December 18, 2024, Robinson announced FAA approval to extend the service life of R22 and R44 main and tail rotor blades from 12 to 15 years, and on November 2, 2026, it announced FAA approval for extended R44 component service lives. The November 19 release on the R66 inspection interval does not mention a regulator or a regulatory approval; it points owners to Robinson’s own technical publications.
On the engine side, Robinson chose StandardAero as preferred RR300 engine shop in March 2026. In StandardAero’s release of March 11, 2026, Smith described unpredictable engine overhaul costs and turnaround times as one of the largest challenges R66 customers face, and the agreement set predictable turnaround times for “the 2,000-hour and 4,000-hour PMI events.” StandardAero said it held 150 approved RR300 component repairs and was developing 180 more.
The R66 after 15 years in service
The FAA issued Type Certificate No. R00015LA for the R66 on October 25, 2010, according to Robinson, three years and eight months after the company announced plans for a five-place turbine helicopter. Robinson and Rolls-Royce began working together in 2005 on the RR300 turboshaft, a derivative of the Rolls-Royce model 250 series. Rolls-Royce described the R66 at certification as Robinson’s first turbine-powered model, a five-seat helicopter with a two-blade rotor system.
Robinson says the R66 serves private, utility, public safety and commercial operators. The type also has a military training role: in August 2026, Robinson said the U.S. Army had announced its intent to award its Flight School Next training contract to M1 Support Services, with the R66 as the training aircraft for the Army’s Initial Entry Rotary-Wing program at Fort Rucker, Alabama.
Robinson, which has operated for more than 50 years, also builds the R22, the R44 and the 10-seat R88, and offers autonomous and remotely piloted aircraft through its Robinson Unmanned business unit. The company will exhibit at European Rotors in Lyon on December 1-3, 2026.
MRO & Manufacturing
Canadian Coast Guard Aircraft Services Goes Live on Ramco Software
The Canadian Coast Guard’s Aircraft Services Directorate has completed phase one of its move to Ramco Aviation Software across its bases.

The Canadian Coast Guard’s Aircraft Services Directorate (ASD), which maintains the Government of Canada’s civilian aircraft fleet, has completed the first phase of its move to Ramco Aviation Software, putting inventory, procurement, repair and component maintenance on one platform across its bases. A second phase will add aircraft maintenance planning and execution.
Ramco Systems Canada Inc., a subsidiary of Ramco Systems Limited, announced the go-live in a press release dated November 19, 2026. The system was selected in 2024 for Transport Canada, before the directorate moved to the Coast Guard and the Defence Team on April 1, 2026. Federal procurement records list the contract at C$9,441,099.15 over 36 months.
What the first phase changes
According to the release, ASD now has real-time inventory visibility across all 14 bases and vessels, coast to coast. Aircraft on ground (AOG) demand planning is now electronic, component maintenance routing is tracked digitally, and tighter control of master data has improved the accuracy of records. Ramco said these changes have improved turnaround times for the directorate’s services to Canadian government entities.
The platform connects with ASD’s finance, training, human resources and reporting applications. Ramco said the project replaces legacy manual and siloed processes with an end-to-end digital system that tracks aircraft parts and components in real time. Later phases covering aircraft maintenance planning and execution are in progress, and once they are complete, all of the directorate’s aircraft maintenance and supply chain operations will be managed on one system, according to the company.
Manoj Kumar Singh, Chief Customer Officer – Aviation, Aerospace & Defense at Ramco Systems, said: “Integrated, digital-first operations are now the standard in aviation maintenance.” He added that the go-live “shows what that looks like in practice.” Singh said Ramco has served Canadian aviation for more than two decades and has invested in an AI-powered solution for aviation maintenance and supply chain operations, with the goal of “ensuring that the right part is in the right place at the right time so the fleet stays ready.”
A contract first awarded under Transport Canada
Ramco announced on August 7, 2024, that its software had been selected, after a Request for Proposal (RFP), as the Aircraft Inventory & Maintenance Management System (AIMMS) for Transport Canada’s Aircraft Services Directorate. The cloud-based system, with Maintenance and Supply Chain Management modules, was to cover rotary and fixed-wing fleets at bases across Canada, replace ASD’s existing systems and manage inventory and maintenance tasks at component level in compliance with the Canadian Aviation Regulations (CARs). Ramco Chief Executive Officer Sundar Subramanian said at the time that the company was “honoured to be chosen as Transport Canada’s Aircraft Services Directorate technology partner.”
The CanadaBuys award notice for contract CW2362403 names Ramco Systems Canada Inc. as the supplier, the Department of Public Works and Government Services (PSPC) as the contracting organization and the Department of Transport as the buying organization. The contract was awarded through a competitive process on the highest combined rating of technical merit and price. It runs for 36 months, from June 17, 2024, to June 16, 2027, with a value of C$9,441,099.15. The notice describes the aim as giving ASD employees modern maintenance and inventory tools in a fully integrated digital environment at the aircraft part and component level.
From Transport Canada to the Defence Team
The directorate changed departments while the project was under way. The Canadian Coast Guard joined the Defence Team on September 2, 2025, reporting to the Minister of National Defence, and remains a civilian Special Operating Agency. The transfer of ASD was announced in Budget 2025, and National Defence says an Order in Council made on March 25, 2026, took effect on April 1, 2026.
The Coast Guard’s April 1, 2026, news release said the transfer gives it operational control of the Government of Canada’s civilian aerial fleet, which supports operational flights, environmental response, natural disaster response and remote community outreach. It tied the move to Bill C-12, the Strengthening Canada’s Immigration System and Borders Act, which expands the Coast Guard’s security and surveillance responsibilities. The directorate was established in 1936, and its personnel include pilots, aircraft maintenance engineers, flight operations leaders, Remotely Piloted Aircraft System (RPAS) pilots and technical advisors.
National Defence said in an April 1, 2026, Maple Leaf article that the transition would take place gradually. According to the Coast Guard, the fleet also supports the Department of Fisheries and Oceans, National Defence’s Aerospace Engineering Test Establishment and the Royal Canadian Air Force and, on request, the Royal Canadian Mounted Police, the Transportation Safety Board of Canada and Ottawa Police Services. Transport Canada keeps responsibility for aviation regulations, standards and operator oversight, and for the National Aerial Surveillance Program.
What the release leaves open
The release does not disclose the size of the ASD fleet, the number of aircraft the system now covers, or a date for the second phase. The CanadaBuys notice still lists the Department of Transport as the buying organization, and the current contract term ends on June 16, 2027.
Ramco says its aviation software is used by more than 24,000 users to manage more than 4,000 aircraft, with more than 90 aviation organizations on board. AirPro News reported in August 2026 on Ornge’s move to paperless maintenance with Ramco’s platform in Ontario, and in September 2026 on Ramco’s engine data agreement with Safran Helicopter Engines for helicopter operators.
MRO & Manufacturing
Collins Aerospace Breaks Ground on Propeller MRO Facility in India
Collins Aerospace began work on a Bengaluru propeller MRO shop for ATR 42/72 and Airbus C295 fleets, with operations expected in early 2029.

Collins Aerospace broke ground on November 17, 2026, on a propeller maintenance, repair and overhaul (MRO) facility at its Collins India Operations Center (CIOC) in Bengaluru, a shop that will service propeller systems for ATR 42/72 regional turboprops and Airbus C295 military transports. The company expects it to begin operations in early 2029 with a team of up to 50 technicians and engineers.
In a press release dated November 17, 2026, RTX said the site will be India’s first propeller MRO facility authorized by a foreign aerospace original equipment manufacturer (OEM), and that it will serve operators throughout the Asia Pacific region. Collins described the project as a multi-million-dollar commitment but did not disclose the amount. It builds on more than $200 million the company said it has deployed in India over the last five years across engineering, manufacturing, testing and aftermarket propeller maintenance.
What the Bengaluru propeller shop will cover
According to the release, the facility will specialize in advanced propeller systems for the two aircraft types and will support the growth of regional air travel and military transport modernization in India and the wider Asia-Pacific region. Staffing is planned to grow beyond the initial team as service volume increases.
Ajay Mahajan, president of Advanced Structures at Collins Aerospace, said: “Today’s groundbreaking represents our commitment to strengthening India’s aviation ecosystem and meeting customer demand.” He said that as regional connectivity expands across India, high fleet availability is critical for operators, and that in-country propeller MRO capability will reduce turnaround times and operational downtime. “Support from the government of Karnataka has helped enable this investment,” Mahajan said.
The release does not name launch customers, the size of the new building or the specific propeller models and repair approvals the shop will hold.
The 568F propeller and Collins’ existing regional support
In a June 13, 2019, release from Figeac, France, Collins said its 568F six-blade propeller, used on the ATR 42 and ATR 72, had more than 30 million flight hours of service experience. At the time it launched a cost-of-ownership program covering more than 900 ATR 42/72 aircraft in over 100 countries, which it said was designed to cut average fleet operating costs by up to 20 percent, with upgrades in deicing, protective treatments and pitch change systems. The same release said Collins had broken ground on a Propeller Center of Excellence at its Figeac facility. ATR is an equal partnership between Airbus and Leonardo.
The Bengaluru shop adds to Collins’ MRO footprint in the region. In February 2022, Collins said it would quadruple its MRO space in Selangor, Malaysia, moving from a 40,000 square-foot facility to a new 160,000 square-foot facility at Subang Aerotech Park. That expansion added propeller work, along with air cycle machines, heat exchangers, engine starters, valves and actuation systems, and listed the ATR 42 and ATR 72 among the supported platforms. Daven Tey, regional director, IATA III Aftermarket Operations for Collins Aerospace, said at the time: “Our customers are eager for in-region support for their growth platforms.”
The C295 fleet taking shape in India
On the military side, the Indian Air Force (IAF) ordered 56 C295 aircraft to replace its Avro 748 fleet. When Airbus Defence and Space handed over the first aircraft in Seville in September 2023, Jean-Brice Dumont, Airbus’s Head of Military Air Systems, called the contract “the largest order in the history of the C295.” Airbus said then that the first 16 aircraft would be assembled in Seville, Spain, and that the remaining 40 would be manufactured and assembled with Tata Advanced Systems Limited (TASL) at a final assembly line in Vadodara, western India. AirPro News covered the first India-assembled C295’s test flight from that line. Airbus said in 2023 that it expected the final aircraft to be delivered to the IAF by August 2031.
In the same release, Airbus said the C295 had 283 orders from 41 operators and could carry up to 71 troops or 50 paratroopers and operate from short and unpaved runways.
The Bengaluru campus behind the project
The propeller shop will be located at the CIOC, which opened in November 2025 as a 26-acre aerospace manufacturing facility at KIADB Aerospace Park in Bengaluru. At its opening, covered in AirPro’s report on the Collins Bengaluru manufacturing hub, the company said the site would start by making seats, lighting and cargo systems, temperature sensors, communication and navigation systems, water solutions and evacuation slides, and would host more than 2,200 employees by 2026.
Collins said in that November 2025 release that it had manufactured and invested in India for nearly three decades, with more than 6,500 employees in the country across engineering, digital, manufacturing, operations and supply chain. The November 2026 release says the CIOC now supports the production of more than 70 products and manufactures mechanical, electromechanical and electronic systems using artificial intelligence, additive manufacturing and robotics.
Collins Aerospace is a business of RTX, which reports more than 180,000 employees and 2025 sales of more than $88 billion, and is headquartered in Arlington, Virginia.
MRO & Manufacturing
Deutsche Aircraft Signs KF Aerospace to Support D328eco in Canada
Deutsche Aircraft and KF Aerospace sign a letter of intent for D328eco maintenance and lifecycle support in Canada and North America.

Deutsche Aircraft has signed a Letter of Intent with KF Aerospace to build a maintenance and support network for the D328eco regional turboprop in Canada and North America, the German manufacturer announced on November 20, 2026. The agreement lines up local maintenance, repair and overhaul (MRO) capacity for the 40-seat aircraft before it has entered service.
In its press release, datelined Wessling and Kelowna, Deutsche Aircraft said the partnership aims to give regional operators in Canada and North America reliable, locally based maintenance and lifecycle support as the D328eco approaches entry into service. KF Aerospace, which the release describes as Canada’s largest commercial MRO provider, can support current D328 and future D328eco operators with scheduled inspections and the full range of MRO services. The release does not disclose financial terms, which KF facilities will be involved, or a timetable for turning the letter of intent into a firm agreement.
Support in place before service entry
Deutsche Aircraft said it is investing in in-country service infrastructure ahead of the D328eco’s entry into service, pointing to the role regional aviation plays in supporting economic activity and connecting remote communities across Canada. It called Canada one of the world’s most demanding regional aviation markets, where reliability and aftermarket support matter, especially in northern and underserved regions.
“We are deliberate in how we build our global support network,” said Alexander Tesch, Vice President Customer Support & Services at Deutsche Aircraft. He said customers must have immediate access to trusted, high-quality maintenance when the D328eco enters service, and that KF Aerospace is the ideal partner to anchor the company’s North American presence.
Nils Heuer, Director Global Sales at Deutsche Aircraft, said Canadian customers need “operational certainty and continuity” as well as a modern aircraft. Bryan Akerstream, Vice President, Business Development at KF Aerospace, said “Partnering with Deutsche Aircraft allows us to support a new generation of regional aircraft” and that the partnership aligns with the needs of Canadian operators.
Deutsche Aircraft described the agreement as part of a strategy to build a global, customer-centric MRO network for the D328eco fleet, linking its European base with regional partners in key markets. The release names no other partners in that network.
KF Aerospace’s maintenance base
KF Aerospace was founded by Barry Lapointe in 1970 as Kelowna Flightcraft Ltd. and is headquartered in Kelowna, British Columbia. According to its website, its maintenance and engineering business completes 1,000,000 maintenance hours on over 300 projects annually, with facilities in Kelowna, Vancouver and Hamilton, Ontario, and a workforce of 1,200. Its shops cover landing gear, components, non-destructive testing (NDT), avionics and composites.
Beyond MRO, KF runs a cargo feeder network in British Columbia whose primary customer is Purolator Canada. Since 2005 it has led a group of contractors providing pilot training and in-service support for the Royal Canadian Air Force (RCAF) in Southport, Manitoba, and it is a founding partner, with CAE, of SkyAlyne for the RCAF’s Future Aircrew Training program. KF is also a Transport Canada Design Approval Organization, and AirPro News covered KF’s Boeing 737-800 Combi certification in January 2026.
Where the D328eco program stands
The D328eco is a 40-seat regional turboprop powered by the Pratt & Whitney Canada PW127XT-S engine, according to Deutsche Aircraft, which is the type certificate holder for the original D328. The company rolled out the first D328eco test aircraft, TAC 1, at Oberpfaffenhofen in May 2025.
In September 2026, Deutsche Aircraft officially inaugurated the D328eco final assembly line at Leipzig/Halle Airport, an investment of more than €100 million on a 60,500-square-metre site designed for up to 48 aircraft per year, according to its third-quarter newsletter. AirPro News reported on the Leipzig line’s opening at the time.
On November 5, 2026, Deutsche Aircraft and HEGGEMANN AG announced taxi and initial flight-test validation of a new landing gear for both the existing Dornier 328 fleet and the D328eco. The tests used a dedicated Dornier 328 test aircraft, which completed its initial development flight campaign in September 2026, and certification continues with flight, structural, durability, braking, steering and operational testing. AirPro News covered the landing gear validation when it was announced.
The newsletter listed flight testing, faster certification and the ramp-up to serial production as the focus for the fourth quarter of 2026. Neither the newsletter nor the November 20 release gives an entry-into-service date. Deutsche Aircraft’s first announced D328eco customer, German operator Private Wings, signed a letter of intent for five aircraft in May 2023, when it operated nine Dornier 328 turboprops, according to Deutsche Aircraft.
-
Space & Satellites7 days agoSpaceX Catches Starship From Orbit as Flight 15 Booster Is Lost
-
Commercial Aviation7 days agoLufthansa A350-1000 Brings Starlink Wi-Fi to Long-Haul on December 3
-
Company Performance5 days agoS&P Upgrades Aviation Capital Group to BBB After ITOCHU Deal Closes
-
Space & Satellites4 days agoNASA Targets November 18 Undocking for SpaceX CRS-35 Cargo Dragon
-
Space & Satellites4 days agoSierra Space Expands Victory Works Satellite Factory in Colorado
