Connect with us

Technology & Innovation

Northumbria and Edinburgh Develop PFAS-Free Ice Protection for Wings

Northumbria and Edinburgh researchers are combining a PFAS-free slippery coating with surface acoustic waves to keep aircraft wings free of ice.

Published

on

Northumbria and Edinburgh Develop PFAS-Free Ice Protection for Wings
Photo: Northumbria University

Researchers at Northumbria University and the University of Edinburgh are developing a way to protect aircraft wings from ice without PFAS chemicals in a three-year project, pairing an ultra-slippery coating with surface acoustic waves that shake ice loose. The hybrid system will be tested in the icing wind tunnel of Spain’s Instituto Nacional de Técnica Aeroespacial (INTA) in Madrid.

In a press release dated November 17, 2026, Northumbria said the work is funded by the Engineering and Physical Sciences Research Council (EPSRC), part of UK Research and Innovation. Most existing water-repellent coatings rely on per- and polyfluoroalkyl substances (PFAS), which do not break down in the environment and face growing regulation, the university said. The new coating is PFAS-free, and the team will also explore its use in wind energy and other sectors affected by ice.

A passive coating paired with an active method

The Edinburgh team, led by Professor Glen McHale, has developed a liquid-like surface treatment that forms an ultra-thin layer chemically bonded to a surface, so water runs off and ice struggles to stick. The Northumbria team, led by Professor Richard Yongqing Fu, brings acoustic wave expertise: electrical signals drive surface acoustic waves whose small vibrations crack ice and shake it free.

“A passive coating alone isn’t enough for long-term ice protection, so we need to combine it with an active method,” Fu said. Early studies used glass and silicon, which are not widely used in industry, and the team will next apply the coatings to aluminium and epoxy-based composites. Northumbria has already shown that the acoustic approach can remove ice in an icing wind tunnel, including on the leading edge of a model aircraft wing.

The researchers believe the method could use far less energy than conventional active systems such as electrothermal heating, and they hope to explore wireless power delivery so devices would not need a physical power connection. Industry partners CAV Ice Protection, NDT Consultants and Jesmond Engineering are helping shape the research and supporting wind tunnel testing, alongside the Offshore Renewable Energy Catapult.

From the EU’s Sound of Ice project to the INTA tunnel

The Madrid tests build on earlier work in the EU-funded Sound of Ice project. According to the European Commission’s CORDIS record, SOUNDofICE ran from November 1, 2020, to April 30, 2025, under the Horizon 2020 Future and Emerging Technologies programme, with an EU contribution of €4,207,626.25. It was coordinated by Spain’s Consejo Superior de Investigaciones Científicas (CSIC), and INTA was one of its participants.

That project aimed to detect accreted ice and remove it with low energy use by engineering MHz acoustic waves at the surface, with proof-of-concept devices intended for the aeronautics and wind power industries. In the US, NASA has run supercooled large droplet icing tests to help validate tools for FAA Appendix O certification.

Fu cautioned that the work is “still early-stage research,” noting that many ice protection technologies are being developed worldwide, from electrothermal to photothermal approaches. McHale said ice build-up on energy transmission structures, wind turbines and aircraft wings “presents real and substantial dangers.” The wider team includes Professor Hamdi Torun and Dr Prashant Agrawal at Northumbria and Professor Dipa Roy and Dr Gary Wells at Edinburgh.

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading
Click to comment

Leave a Reply

Technology & Innovation

KAI and KIMM Sign MOU to Jointly Develop Aerospace Technologies

Korea Aerospace Industries and KIMM signed an MOU on November 18, 2026, covering joint research, test infrastructure and AI-based technology.

Published

on

KAI and KIMM Sign MOU to Jointly Develop Aerospace Technologies
Photo: Korea Institute of Machinery and Materials

Korea Aerospace Industries (KAI) and the Korea Institute of Machinery and Materials (KIMM) signed a memorandum of understanding (MOU) on November 18, 2026, at KAI’s headquarters in Sacheon to jointly develop aerospace and defense technologies. The agreement covers technology and personnel exchange, joint research, shared test and evaluation infrastructure, and work on advanced materials, manufacturing and artificial intelligence (AI) technology, according to KIMM.

KIMM, which describes itself as a non-profit government-funded research institute under the Ministry of Science and ICT, said the two organizations will link its original technologies and research infrastructure with KAI’s aerospace system development capabilities. The aim is cooperation that runs from joint research through testing, evaluation and field application.

Four areas of cooperation

Under the MOU, KIMM said, the parties will pursue exchange of key technologies and specialized personnel; joint research projects and joint responses to national programs; shared use of test, evaluation and research infrastructure; and upgrades to advanced materials, manufacturing and AI-based technology. They also plan to jointly plan and take part in government research and development (R&D) projects.

KIMM’s reliability verification and test and evaluation capabilities will be linked to KAI’s aerospace technology development to raise the performance and reliability of core parts, materials and systems, the institute said. The two sides will jointly use test and research facilities and pursue work on low-observable surface technology and intelligent metal additive manufacturing.

KIMM said it expects the agreement to widen opportunities to apply its research results in industry, while KAI is expected to strengthen its technology competitiveness in aircraft development and production. The MOU adds to other agreements KAI has signed, including its advanced air mobility MOU with Hyundai and a commercial aircraft MOU with Embraer.

Technologies discussed after the signing

At a technology exchange meeting after the signing, four fields were presented and discussed: reliability evaluation and laser peening for aerospace and defense parts; transparent meta-display; directed energy deposition (DED) and wire arc additive manufacturing (WAAM) metal additive manufacturing process technology; and active control of aircraft radiant energy.

The discussion focused on improving the reliability of aircraft fastening parts, using transparent meta-display for stealth applications, applying metal additive manufacturing to AI-based intelligent production and maintenance, and improving aircraft low-observable performance through active control of radiant energy. KIMM said the parties will use the results to identify detailed joint tasks and follow up with joint research.

What the two leaders said

KIMM President Seog-Hyeon Ryu said that raising technology competitiveness in aerospace and defense depends on applying original technologies at actual development and production sites and on securing the performance and reliability of core parts and systems. He said combining KIMM’s machinery technology and test and evaluation capability with KAI’s system development capability would deliver results from joint research through technology demonstration to field application.

KAI Chief Executive Officer Kim Jong-chul said early securing of new technologies and internalizing core technologies are most important in preparing for future business, and that the cooperation will strengthen KAI’s aerospace technology competitiveness and help secure future growth engines, according to KIMM.

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading

Technology & Innovation

AISPECO Books Eight Airborne Sensor System Orders After Volatus Deal

Volatus Aerospace unit AISPECO has eight airborne sensor system orders from six customers, including a defense prime, with four delivered.

Published

on

AISPECO Books Eight Airborne Sensor System Orders After Volatus Deal
Photo: Volatus Aerospace

AISPECO, the Lithuanian airborne sensor maker that Volatus Aerospace acquired in October, has booked orders for eight airborne sensor systems from six customers, including a custom system for a defense prime contractor. Four systems have been delivered since Volatus closed the acquisition on October 28, 2026.

Volatus Aerospace Inc. (TSX: FLT), a Canadian-headquartered aerospace and defense company, announced the orders in a press release dated November 17, 2026. It did not disclose the value of the orders, saying customer-specific financial terms are withheld for competitive reasons, but it said AISPECO systems typically cost about US$200,000 to US$650,000 per unit, depending on configuration.

Defense, utility and mapping customers

The customers are in North America, Europe and Asia, and the release groups the orders into three markets. In defense, a prime contractor, which Volatus did not name, ordered a custom airborne sensor system with onboard edge AI processing for machine-learning applications.

In infrastructure, Volatus said utility inspection customers are replacing legacy equipment and moving their operations to lower-cost fixed-wing aircraft. According to the company, flight tests of AISPECO’s new FOCUS system showed survey speeds up to three times faster than a customer’s previous camera configuration. When it closed the acquisition, Volatus described FOCUS as an AI-guided gimbal.

In urban mapping, AISPECO won an order for a light detection and ranging (LiDAR) system in Asia after what the company called a competitive evaluation against established global manufacturers. The release does not name the competitors or the customer.

Beyond the eight systems, AISPECO signed two short-term equipment service contracts to support customer survey programs. Volatus said discussions about additional 2027 orders with existing customers are underway.

Volatus CEO Glen Lynch said: “Within weeks of closing, AISPECO has converted demand into real orders and real deliveries.” He said customers are replacing legacy systems, shifting work to lower-cost fixed-wing platforms and entering new markets, and that AISPECO is “off to a strong start inside the Volatus platform.”

What Volatus bought in Lithuania

The October 28 closing, announced by Volatus from Mirabel, Québec, completed the previously announced AISPECO deal. AISPECO UAB is based in Vilnius and develops aerial survey payload systems and flight management technology. Its products are the HELIUX modular sensor pods, the FOCUS gimbal, CORE electronics and ROBINCOP flight-management software, which Volatus said support intelligence, surveillance and reconnaissance (ISR), infrastructure inspection, energy, utilities, surveying and geospatial intelligence.

According to Volatus, AISPECO has an established commercial business in utility inspection, forestry, surveying, mapping and infrastructure monitoring, and its sales also include defense-related and border-surveillance systems. The acquisition gave Volatus an engineering and manufacturing base in Lithuania, a NATO and European Union member, alongside its Canadian manufacturing. Volatus said it plans to combine the technology with its aviation operations and pursue government and allied markets.

The consideration was US$3.0 million in cash, 17,434,193 common shares at a deemed price of C$0.5813 per share and 1,859,804 restricted share units, subject to customary working capital adjustments. Up to US$2.5 million in contingent consideration, payable in cash or shares at Volatus’s option, is tied to milestones over three years. At the closing, Lynch said: “This acquisition brings us closer to delivering a complete, end-to-end aerial intelligence ecosystem.”

Volatus describes itself as a Canadian integrated aerospace company providing unmanned aerial systems, aerial intelligence services, autonomy software and advanced training for civil infrastructure, public safety and defense markets. It operates piloted and remotely piloted aircraft systems for intelligence and cargo work.

What the order book leaves open

For survey operators and equipment buyers, the release answers how many systems are on order but not their combined value, the names of the customers or the aircraft they will fly on, beyond the utility customers’ move to fixed-wing aircraft.

The four remaining systems are scheduled for delivery between November 2026 and the first quarter of 2027. Volatus said it expects the integration of AISPECO into its global sales, training and operations platform to support growth in the utility, infrastructure and defense markets.

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading

Electric Aircraft

CATL Becomes Exclusive Battery Partner for Yiweite eVTOL Aircraft

CATL signed a strategic agreement to supply aviation power batteries for Yiweite’s passenger and cargo eVTOL aircraft as exclusive partner.

Published

on

CATL Becomes Exclusive Battery Partner for Yiweite eVTOL Aircraft
Photo: CATL

CATL has become the exclusive battery partner of Chinese aircraft developer Yiweite (Hangzhou) Aviation Technology Co., Ltd., under a strategic cooperation agreement covering its passenger and cargo electric vertical takeoff and landing (eVTOL) aircraft. CATL will supply the aviation power batteries for those aircraft.

CATL announced the agreement in a press release on its website dated November 12, 2026. The release describes the batteries as offering high energy density, long endurance and high safety. It gives no capacity or energy density figures, no delivery schedule and no contract value.

Yiweite founder and chairman Ren Wenguang and CATL chairman and CEO Zeng Yuqun attended and witnessed the signing. Yiweite co-founder and general manager Zhao Jiwei and Hu Wenbin, executive president of CATL’s aviation business, signed the agreement for the two companies.

A run of aviation agreements at CATL

The Yiweite agreement is one of several aviation announcements CATL published in November 2026. On November 2, 2026, CATL said Blue Vector had chosen it as exclusive battery partner and that it would custom-develop an aviation power battery for Blue Vector’s SKYLA V30 aircraft. The two companies signed a strategic cooperation agreement and a product cooperation agreement at the same time, and Hu Wenbin signed for CATL.

On November 11, 2026, in Ningde, Fujian, CATL and the Civil Aviation University of China signed an agreement to build the Aviation Battery Airworthiness Technology Innovation Joint Laboratory. According to CATL, the laboratory will study airworthiness standards and compliance verification methods for aviation pure-electric and hybrid energy systems and low-altitude applications, help compile and revise civil aviation technical standards and group standards, and build a test and verification platform for aviation battery safety testing and airworthiness verification. The university and CATL also plan joint training courses for electric aviation.

CATL, which describes itself as a global leading new energy innovation technology company, has been represented at the top in each case: according to its releases, chairman and CEO Zeng Yuqun attended the Yiweite and Blue Vector signings as well as the signing with the university.

What the release does not say

The Yiweite release does not name the aircraft that will carry the batteries, the number of aircraft or battery packs involved, or a timetable. It also does not say where Yiweite’s eVTOL programmes stand with the Civil Aviation Administration of China (CAAC).

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading
Advertisement

Follow Us

AirPro Atlas

Explore aviation on one 3D globe
4,000+ airports, 700+ active airlines, 180+ launch pads and 30 aircraft plants and boneyards, with live weather and launch countdowns.
Open the Atlas

aviation newsletter

Latest

Categories

Tags

Popular News