This is a developing story. Information may change as official details are released.

The Federal Aviation Administration (FAA) ordered all airports ground stopped on November 13, 2026, after what the agency described as a temporary telecommunications outage. An advisory from the FAA’s Air Traffic Control System Command Center (ATCSCC) set the start of the ground stop at 20:53 UTC (3:53 p.m. EST) and told operators that departing traffic should remain on the ground until further notice.

In a statement posted on its official account on X on November 13, 2026, the FAA said:

“There has been a temporary telecommunications outage – out of an abundance of caution all flights have been halted. Every flight has been accounted for and international flights will be handled on a case by case basis.”

What the command center advisory says

ATCSCC Advisory 111, time-stamped 20:54 UTC on November 13, is addressed to all aircraft operators. It states that, by order of the command center, all airports are ground stopped “due to extraordinary circumstances and for reasons of safety.”

The advisory’s summary table lists the scope as all airports and the reason as equipment/outage. It gives an event window from 20:53 UTC on November 13 to 04:00 UTC on November 14 (11 p.m. EST on November 13), lists 04:00 UTC as the time of its next update, and says inbound international flights will be managed on a case by case basis.

A follow-up operations plan, ATCSCC Advisory 112, time-stamped 21:02 UTC, carried the national ground stop forward with an event time of 21:00 UTC “and later.” It repeated that all departing traffic should remain ground stopped until further notice.

What the FAA has not yet said

The FAA’s statement does not say where the telecommunications outage occurred, which systems or facilities were affected, or when departures are expected to resume. The FAA has not stated the cause of the outage.

Neither advisory gives the number of flights held on the ground or airborne when the order took effect. The FAA’s statement says every flight has been accounted for. The command center’s advisory lists 04:00 UTC on November 14 as its next scheduled update.

Owners and operators of single-engine turbine-powered airplanes in the United States will be able to replace annual or 100-hour inspections with a manufacturer-recommended inspection program, or with one they design themselves and the FAA approves, under a final rule the agency published in the Federal Register on November 10, 2026. The rule takes effect on January 11, 2027.

The FAA estimates the change will produce annualized net cost savings of $57.02 million, using a seven percent discount rate over a 10-year estimate. The same rule extends the deadline for mechanical reliability reports from 72 to 96 hours, opens the same inspection options to unmanned aircraft, and clarifies contract maintenance and technical data provisions for Part 145 repair stations.

What changes for owners and operators

Previously, single-engine turbine-powered airplanes were not authorized to use the alternative inspection options listed in 14 CFR 91.409(f). Those options include an inspection program that is part of a Part 121 or Part 135 operator’s Continuous Airworthiness Maintenance Program (CAMP), an approved aircraft inspection program under Part 135, a manufacturer-recommended inspection program, and a program created by the owner or operator and approved by the FAA. Under the final rule, these airplanes can use a manufacturer-recommended program or one created by the registered owner or operator, provided the Administrator approves it. The annual, 100-hour and progressive inspection programs remain available.

The FAA traces the gap to 1989, when it added inspection options to § 91.409(e) for turbine-powered rotorcraft. Single-engine turbine-powered airplanes were left out because they were less common than rotorcraft at the time. The agency says that is no longer the case, with more than 4,500 such airplanes now registered in the U.S., and that it sees no safety concerns that justify denying them the same flexibility. It says manufacturer-recommended programs for turbine-powered rotorcraft have consistently proven to be safe and effective alternatives to annual or 100-hour inspections.

The cost estimate assumes that every manufacturer of single-engine turbine-powered aircraft develops and makes available its own inspection program for that type, the rule says.

Drones, reporting and inoperative equipment

For unmanned aircraft operating under Part 135, the rule lets owners and operators follow the Part 91 inspection rules and choose either a manufacturer-recommended program or one established by the registered owner or operator, with the Administrator’s approval. Before the rule, the FAA accommodated drone operations under Parts 91 and 135 through exemptions and waivers that generally required the aircraft to follow the manufacturer’s inspection instructions. The agency noted that Part 135 drone operations are a minority of such operations and will decline in number once its rulemaking to create a new Part 108 for Beyond Visual Line of Sight (BVLOS) operations is completed, a rule AirPro News covered when the FAA released its draft Part 108 proposal.

In subpart K of Part 91, the reporting interval for mechanical reliability reports grows from 72 to 96 hours, matching §§ 121.703, 125.409, 135.415 and 145.221, and the reports can now be submitted electronically. The section heading changes from “Mechanical reliability reports” to “Service difficulty reports.”

The rule also clarifies § 91.405 so that repair is not the only maintenance action owners can take on a discrepancy found during inspection, adds a reference to the inoperative instruments and equipment rules in § 91.213, and states that there is no time limit on how long an inoperative item can stay inoperative, as long as it is inspected at each required inspection and has no adverse effect on the aircraft’s continued safe operation.

What it means for repair stations

For Part 145 repair stations, the rule removes the word “current” from the quality control manual requirement in § 145.211(c)(1)(v), so it now refers to establishing and maintaining technical data for maintaining articles. Five commenters had said the word caused confusion, and one argued it could lead stations to think they only had to keep current data. The rule also clarifies that § 145.217 on contract maintenance applies when a certificated repair station approves for return to service work performed by an outside source, using the term “outside source” throughout the section, and replaces “an article” with “the work” in parts of § 145.201. The 2024 proposal had also called for removing the phrase “for which the certificated repair station is rated” from § 145.201(a)(2), so that stations could arrange contract maintenance on articles they are not rated for. AirPro News has previously reported on the weight of return to service statements.

The FAA acknowledged that its proposal had left Part 145 repair stations out of the Regulatory Impact Analysis (RIA) and added them in the final rule, after four commenters said removing the “current” data requirement could represent millions of dollars in savings for stations.

How the rule got here

The notice of proposed rulemaking (NPRM) was published on January 31, 2024, with comments accepted until May 1, 2024. The FAA received 21 comments, including one duplicate and two late submissions, eight from individuals and 13 from businesses. It received only supportive comments on the changes to Parts 91, 125, 135 and 137 and adopted those as proposed, while making several wording changes to Part 145 in response to commenters.

The rule amends 14 CFR Parts 91, 125, 135, 137 and 145. Technical questions go to Bryan B. Davis of the Airmen and Special Projects Branch, AFS-320, in the FAA’s Aircraft Maintenance Division, Flight Standards Service.

The Qatar Civil Aviation Authority (QCAA) launched a new strategy for the country’s civil aviation sector on November 10, 2026, built on three pillars: operational efficiency, regulatory excellence and international influence. Its stated objectives include strengthening safety, security and environmental sustainability standards and digitizing operational and regulatory processes.

In a press release dated November 10, 2026, QCAA said the strategy, titled “Leading the Sky, Inspired by Vision,” was launched under the patronage of Sheikh Mohammed bin Abdulrahman bin Jassim Al Thani, Prime Minister and Minister of Foreign Affairs, and Minister of Transport Sheikh Mohammed bin Abdulla Al Thani, at a ceremony attended by several high-ranking state officials. The release does not give measurable targets, a timeline or a budget. It says the authority plans to implement development initiatives and projects with relevant entities in the next phase, but does not list them.

What the strategy sets out

According to QCAA, the strategy aims to build a leading global civil aviation ecosystem that improves safety, ensures secure and sustainable air transport and strengthens Qatar’s international standing in civil aviation. Its mission covers strengthening integration among the sector’s components and promoting air connectivity and innovation.

A video shown at the ceremony set out the key objectives: strengthening safety, security and environmental sustainability standards; reinforcing Qatar’s position as a leader in air transport; and digitizing operational and regulatory processes. The video also listed the strategy’s values as security and safety, sustainability and resilience, and innovation and leadership.

QCAA said the strategy supports the objectives of Qatar National Vision 2030 and complements the Ministry of Transport Strategy 2025-2030, which envisions an integrated, secure, resilient and sustainable transport ecosystem.

What QCAA’s leadership said

Mohamed bin Faleh Al-Hajri, In Charge of Managing QCAA, described the launch as “a key milestone in enhancing our readiness to adapt to change.” He called the strategy an important step toward a more advanced and prosperous future, aligned with Qatar National Vision 2030.

Al-Hajri said the strategy provides a regulatory framework and a comprehensive roadmap for developing the aviation ecosystem, improving operational efficiency and enhancing air connectivity, so that the sector can keep pace with global growth and developments. He said it was built on a forward-looking vision to “uphold the highest standards of safety and security,” with national talent and sustainable growth among its aims.

He also reaffirmed QCAA’s commitment to improving the quality of its programmes and services and to overseeing the strategy’s implementation in the coming period, turning it into initiatives, projects and achievements that he said would strengthen Qatar’s leadership in civil aviation.

How it fits the national transport plan

The Ministry of Transport Strategy 2025-2030 that QCAA’s plan complements was launched by the Prime Minister on September 7, 2025, under the slogan “Reaching Beyond Horizons.” According to the ministry, it includes 125 projects arising from 42 initiatives, with total investment exceeding QAR 1.2 billion and about 40% private sector participation.

The ministry said those projects aim to make Qatar a regional and global hub for transport and logistics, with the stated goal of doubling the transport industry’s contribution to GDP. Its five strategic aspirations are economic growth, service optimization, customer-centricity, sustainability and resilience, and workforce development. QCAA’s November 2026 release does not say which of the ministry’s projects or funds, if any, relate to civil aviation.

Where Qatar’s airspace programme stands

The strategy launch follows several years of work on Qatar’s own airspace, the Doha Flight Information Region (FIR). According to the Ministry of Transport, the ICAO Council decided to establish a Doha FIR at the 10th meeting of its 225th Session in March 2022, after more than five years of deliberations. QCAA then signed operational agreements with Saudi Arabia, Bahrain and the United Arab Emirates, following a similar agreement with Iran, with the Doha FIR’s operational processes scheduled to begin on September 8, 2022.

On April 13, 2025, the ministry announced that the ICAO Council had approved Qatar’s implementation of Phase Two of the Doha FIR and Upper Information Region (UIR) and of its Search and Rescue Region (SRR). Phase Two covers air traffic management over international waters north of Qatar, from sea level to an unlimited altitude. The ministry said QCAA had upgraded infrastructure, updated systems, enhanced automation and recruited air traffic controllers, technicians and specialists for the phase.

Preparations for that phase were still under way in October 2026. In a release dated October 27, 2026, QCAA said Qatar and the UAE had signed a cooperation agreement between their air navigation service providers, which it described as part of Qatar’s preparations to activate the second phase of the Doha FIR. Al-Hajri and Saif Mohammed Al Suwaidi, Director General of the General Civil Aviation Authority of the UAE, attended the signing.

Regional meetings in Doha

The agreement was signed on the sidelines of the Eighth Meeting of the Directors General of Civil Aviation-Middle East Region (DGCA-MID/8), which QCAA hosted in Doha with the ICAO Middle East Regional Office from October 26 to 28, 2026. QCAA said the agenda covered aviation safety and air navigation, cybersecurity, environmental protection and sustainability, air transport facilitation, the Middle East Aviation Security Programme and challenges related to unmanned aircraft.

In his opening address, Al-Hajri stressed the need for stronger regional cooperation and coordination, saying that “joint efforts and continued regional coordination will contribute to the return of operational activities to normal levels.” He also held separate bilateral meetings with the heads of civil aviation authorities from eight countries: Yemen, Oman, Jordan, Lebanon, Libya, Mauritania, Sudan and Somalia, according to QCAA.

For operators and air navigation service providers in the region, two details remain to be published: the list of projects under the new strategy and an activation date for the second phase of the Doha FIR. QCAA has not announced either in the releases reviewed for this article.