Pursuit Aerospace has acquired UK-based Creasey Castings Limited and initiated a major expansion of its facility in Tunis, Tunisia, to address ongoing supply chain constraints in aerospace magnesium sandcasting.

In a press release issued on October 6, 2026, the Connecticut-headquartered manufacturer detailed the investments aimed at increasing furnace and shell line capacity while bringing critical processes like simulation, heat treatment, and non-destructive testing in-house.

Expanding global casting footprint

The acquisition of Creasey Castings Limited, completed on August 11, 2026, integrates a Sittingbourne, UK-based facility with more than 35 years of heritage in producing high-precision castings. The addition complements Pursuit Aerospace’s existing portfolio of magnesium and aluminum sandcastings, as well as nickel and cobalt-based investment castings.

Concurrently, the company began expanding its aerospace casting operations in Tunis on September 3, 2026. The project will increase the facility’s square footage by 40 percent, bringing the total operational space to 140,000 square feet. Once the expansion is complete, the Tunis site is expected to support a workforce of more than 1,000 employees.

These actions significantly increase our investment and sandcasting capacity and add new capabilities to our casting operations. These investments demonstrate our continuing commitment to support the most important needs of our customers, now and into the future.

The statement was provided by Ben Adams, President and Chief Commercial Officer of Pursuit Aerospace.

Aggressive growth since 2023 merger

Pursuit Aerospace was formed in February 2023 following the merger of Whitcraft Group and Paradigm Precision. Backed by private equity firms Clayton, Dubilier & Rice and Greenbriar Equity Group, the global manufacturer of complex aircraft engine components has executed a rapid consolidation strategy within the aerospace supply chain.

The Creasey Castings purchase marks the sixth acquisition completed by Pursuit Aerospace since its formation. The company previously expanded its UK casting footprint in August 2025 with the acquisition of Aeromet International, a supplier of aluminum and magnesium castings. More recently, in August 2026, Pursuit Aerospace acquired Leesta to integrate precision machining processes with its established forging and casting capabilities.

AirPro News analysis

The aerospace supply chain remains severely bottlenecked, particularly in specialized metallurgical processes like magnesium and aluminum sandcasting. By vertically integrating capabilities such as non-destructive testing and heat treatment, Pursuit Aerospace is positioning itself to capture market share from Original Equipment Manufacturers (OEMs) and Tier 1 suppliers desperate for reliable component flow. The rapid pace of six acquisitions in under four years indicates strong private equity backing aimed at consolidating a fragmented lower-tier supply base to support major engine platforms.

ST Engineering officially opened a new S$170 million airframe maintenance, repair, and overhaul (MRO) facility at Singapore Changi Airport (SIN) on October 9, 2026, integrating artificial intelligence, drones, and humanoid robotics to automate manual tasks.

The Changi Creek facility expands the company’s widebody airframe capacity in Singapore by 40 percent, allowing it to service an additional 100 widebody aircraft annually. Announced in a company press release, the site is expected to create more than 500 jobs, including positions for licensed aircraft engineers and mechanics, while targeting a 25 percent increase in overall productivity through advanced automation.

Integrating robotics and AI into heavy maintenance

The new facility serves as a testing ground for digitalizing aerospace maintenance, a sector traditionally reliant on intensive manual labor. The site incorporates automated parts transport systems designed to streamline logistics on the hangar floor.

According to Singapore Deputy Prime Minister and Minister for Trade and Industry Gan Kim Yong, one such automated project will improve process time by over 80 percent. This system saves employees from walking more than 20,000 kilometers across the warehouse floor and frees up approximately 7,800 man-hours annually.

A humanoid robot is currently in the testing stages at the facility. Once fully operational, the robot will be integrated to retrieve, sort, and transfer items to autonomous mobile robots. ST Engineering plans to introduce this robotic system at its other facilities in Singapore following successful implementation at Changi Creek.

Kevin Chow, President of Commercial Aerospace at ST Engineering, highlighted the operational goals driving the technological investment.

“As airline fleets expand and aircraft stay in service longer, airlines need assured capacity, dependable reliability and consistently high quality. Our latest airframe facility aims to meet these customer expectations.”

Chow noted that the technology-enabled operations reinforce Singapore’s position as a leading global aviation hub while supporting the development of advanced aerospace capabilities.

Expanding global widebody capacity

The 84,000-square-meter facility features four widebody aircraft bays. When fully operational, the Economic Development Board (EDB) of Singapore projects the site will contribute an additional 1.3 million man-hours annually to the company’s network.

Japan Airlines (JL) serves as the anchor customer for the new site. The carrier is the first airline to induct its aircraft into the Changi Creek facility for servicing.

Advertisement

ST Engineering’s post-pandemic growth strategy

The Changi Creek site is ST Engineering’s fourth airframe MRO facility in Singapore. The project was initially announced with a groundbreaking ceremony on September 23, 2023, as part of a broader strategy to capture surging post-pandemic maintenance demand.

The company’s Commercial Aerospace division operates as one of the world’s largest third-party airframe MRO service providers. It maintains a global network across the Asia-Pacific region, the United States, and Europe, boasting over 13 million man-hours of existing capacity prior to the Changi Creek opening.

The Asia-Pacific region is projected to lead global air traffic growth over the next decade, driving significant demand for regional MRO services. To meet this demand, ST Engineering has been actively expanding its global footprint. Recent capacity expansion initiatives include opening new hangars in Pensacola, Florida, and progressing a joint venture facility in Ezhou, China.

AirPro News analysis

The introduction of humanoid robotics and autonomous transport systems at the Changi Creek facility represents a critical pivot for the third-party MRO sector. As the global aviation industry grapples with a persistent shortage of licensed airframe mechanics, substituting manual logistics tasks with automation allows operators to allocate highly specialized human labor exclusively to technical maintenance. If ST Engineering successfully scales these robotic systems across its global network, it could establish a new baseline for turnaround times and cost efficiency in heavy airframe maintenance, forcing competing MRO providers to accelerate their own digitalization timelines.

Airbus SE officially inaugurated its expanded manufacturing facility in El Puerto de Santa María on October 8, 2026, completing a consolidation of its Cádiz operations.

The opening marks the final integration of 750 employees from the former Puerto Real site and the El Puerto location into a single multi-product hub. In a press release issued to mark the inauguration, the company confirmed the move secures its industrial footprint in the Andalusia region following the cessation of the Airbus A380 program.

Transitioning to a multi-product manufacturing hub

The newly expanded plant features an additional 4,000 square meters of industrial space designed to house relocated production lines. According to reporting by El País, the total investment in the consolidation and expansion project exceeded 90 million euros. The facility now operates with a high level of automation and utilizes state-of-the-art carbon fiber technology.

Lars Wagner, CEO Commercial Aircraft at Airbus, attended the inauguration and highlighted the strategic importance of the merged operations.

“The Airbus plant in Cádiz has become a model of multi-product excellence, where commercial aviation and defense successfully coexist. Here, the talent of our people joins forces with state-of-the-art carbon fiber technology, creating powerful cross-divisional synergies.”

The facility is tasked with supporting the manufacturer’s broader global production ramp-up. El País reported that the Cádiz plant aims to reach a production rate of supplying components for 75 Airbus A320 aircraft per month by late 2027. Subsequent targets include supplying components for 12 Airbus A350 aircraft per month by 2028, and five Airbus A330 aircraft per month by 2029.

The end of the Airbus A380 era and regional restructuring

The consolidation project, internally referred to as Airbus Cádiz, was initiated out of necessity following the end of the Airbus A380 superjumbo program. The former Puerto Real facility was heavily dependent on the double-deck aircraft, manufacturing its horizontal stabilizers, rear fuselage, and belly fairings. When A380 production ceased, the plant experienced a severe drop in workload.

In May 2021, Airbus confirmed plans to close the Puerto Real plant, a decision that initially sparked worker protests. By November 2021, unions and the manufacturer reached a preliminary agreement to close the site and transfer operations to El Puerto de Santa María without forced layoffs.

Historical context provided by elEconomista indicates that the final agreement transferred all 350 Puerto Real employees, who were primarily focused on commercial aviation, to join the 400 employees at the El Puerto de Santa María plant, which historically focused on defense components. Airbus officially presented the consolidation project on January 11, 2023. The transfer of the final workers from Puerto Real to the newly constructed facilities in El Puerto de Santa María was completed in July 2026.

Speaking at the inauguration on October 8, 2026, Wagner described the multi-year transition as an initiative that allowed the company to reverse the situation of two unprofitable plants and turn them into a model of efficiency and profitability.

Advertisement

AirPro News analysis

The consolidation in Cádiz illustrates a broader strategic pivot for Airbus SE. By merging a legacy commercial site heavily exposed to the discontinued Airbus A380 with a defense-oriented facility, the manufacturer has eliminated redundant overhead while preserving skilled labor. We view this 90 million euro investment not merely as a regional restructuring, but as a necessary alignment with the company’s aggressive global target of producing 75 Airbus A320 family aircraft per month. Retaining the 750-strong workforce ensures Airbus does not lose critical aerospace manufacturing competencies in southern Spain during a period of intense supply chain pressure.