Connect with us

Regulations & Safety

Southwest Airlines Jets Near-Miss at Nashville Airport on April 18

Two Southwest Airlines jets narrowly avoided a midair collision near Nashville Airport, prompting evasive action and an FAA investigation.

Published

on

This article summarizes reporting by NewsChannel 5 and Phil Williams.

Two Southwest Airlines jets narrowly avoided a midair collision near Nashville International Airport on Saturday afternoon, prompting immediate evasive maneuvers. According to reporting by NewsChannel 5, the aircraft were forced to take sudden action just north of the airport to prevent a disaster.

The incident, which occurred late Saturday, highlights ongoing concerns regarding air traffic control and runway safety. We are closely monitoring the developments as federal aviation authorities and the airline review the flight data.

Details of the Nashville Close Call

According to flight tracking data cited by aviation outlet Paddle Your Own Kanoo, the near-miss happened around 5:45 p.m. on April 18. Southwest Airlines Flight 507, arriving from Myrtle Beach, was attempting to land in gusty conditions. The pilots initiated a precautionary go-around, climbing to an altitude of 2,000 feet.

During this maneuver, air traffic controllers reportedly instructed Flight 507 to turn right. This vector placed the Boeing 737 MAX 8 directly into the departure path of Southwest Airlines Flight 1152, which was taking off for Knoxville from an adjacent runway.

Evasive Action and Safety Systems

To avoid a catastrophic impact, the crews had to react swiftly. NewsChannel 5 Investigates discovered that the two jets were forced into evasive action just north of the airfield.

“Two Southwest Airlines jets were forced to take evasive action late Saturday afternoon… to avoid a potential midair collision,” NewsChannel 5 reported.

Flight tracking data analyzed by Flightradar24 and reported by Paddle Your Own Kanoo suggests the two aircraft came within 500 feet of each other vertically. Aviation safety experts note that such incidents often trigger the Traffic Alert and Collision Avoidance System (TCAS), a critical cockpit alarm that provides pilots with last-resort instructions to climb or descend when aircraft paths converge.

AirPro News analysis

We note that this incident adds to a growing list of runway incursions and near-misses at major U.S. airports over the past two years. While the aviation system remains statistically highly safe, the frequency of these close calls has placed increased scrutiny on air traffic control staffing and pilot adherence to vector instructions. The Federal Aviation Administration (FAA) and the National Transportation Safety Board (NTSB) will likely launch a formal investigation to determine whether controller error or weather-related miscommunication was the primary factor in Saturday’s event.

Frequently Asked Questions

When did the Southwest Airlines near-miss occur?

The incident took place late Saturday afternoon, April 18, 2026, at approximately 5:45 p.m., according to industry reports.

Which flights were involved?

The close call involved Southwest Airlines Flight 507, arriving from Myrtle Beach, and Flight 1152, departing for Knoxville.

How close did the planes get?

Flight tracking data indicates the two jets passed within 500 feet of each other vertically before safely diverging.

Sources

Photo Credit: flightradar24

Continue Reading
Click to comment

Leave a Reply

Regulations & Safety

Bridger Aerospace Integrates TracPlus Data into IGNIS Platform

Bridger Aerospace partners with TracPlus to stream real-time wildfire aircraft data into its IGNIS incident management platform.

Published

on

Bridger Aerospace Group Holdings, Inc. has partnered with aviation data provider TracPlus to integrate real-time aircraft tracking and drop event data directly into Bridger’s IGNIS software platform. Announced on July 20, 2026, the collaboration aims to provide wildland firefighters and incident management teams with a unified operational picture of aerial suppression efforts.

In a press release issued from its Belgrade, Montana headquarters, Bridger Aerospace stated the integration is designed to break down information silos between disparate systems. The move directly responds to recent federal directives, specifically the June 2025 Executive Order 14308, which mandated the modernization of wildfire firefighting technology and improved data sharing across agencies.

Integrating aviation intelligence for ground crews

TracPlus currently manages approximately 2,500 wildfire suppression Commercial-Aircraft and processes 800,000 flight hours annually for over 700 customers in more than 40 countries. Under the new partnership, this extensive aviation intelligence, including real-time aircraft positioning and specific drop event data, will stream directly into the IGNIS platform.

The integration allows ground crews, aviation teams, and incident managers to view exact aircraft operating locations and suppression activity impacts within the broader incident environment. By connecting these specialized platforms, the companies intend to shift aerial firefighting response from a reactive model to a proactive one.

“Trying to do everything yourself isn’t the best way in modern wildfire response,” said Todd O’Hara, CEO of TracPlus. “Our industry moves forward when specialists each perform what they do best and connect their work. By delivering our expertise in bringing aviation data together from every source and streaming it directly into the IGNIS platform, we are empowering the people on the frontline with a more complete operational picture to do their jobs better and help keep their communities safe.”

Aligning with federal modernization directives

The Partnerships aligns with the federal government’s ongoing push for connected, interoperable wildfire technology. In 2025, the White House Office of Science and Technology Policy called for a national roadmap to modernize firefighting technology and improve data sharing between systems under Executive Order 14308.

Bridger Aerospace CEO Sam Davis noted that the combined solution will enhance situational awareness for both the company’s own aerial firefighting operations and incident management teams nationwide.

“Technology is the new frontier in our mission to protect lives, property, and the environment and we just got stronger with TracPlus as a strategic partner,” Davis said.

The announcement follows Bridger Aerospace’s recent expansion in federal contracting, including a Department of the Interior task order secured on July 16, 2026, for the deployment of its multi-mission wildfire aircraft.

AirPro News analysis

We view the Bridger-TracPlus integration as a direct commercial response to the interoperability mandates outlined in Executive Order 14308. Historically, aerial firefighting has suffered from fragmented data, with ground crews, dispatchers, and pilots relying on separate, non-communicating systems. By embedding TracPlus’s massive data feed into the IGNIS platform, Bridger Aerospace is positioning its Software not just as an internal operational tool, but as a comprehensive incident management solution. This strategic alignment with federal modernization goals likely strengthens Bridger’s competitive posture for future government Contracts as agencies prioritize unified operating pictures.

Sources: Bridger Aerospace

Photo Credit: TracPlus

Continue Reading

Regulations & Safety

AIAA Calls for Faster FAA Certification Path for AAM Aircraft

AIAA urges the FAA to adopt predictable AAM certification timelines as bipartisan legislation targets the 5-9 year type certificate process.

Published

on

This article summarizes reporting by Aerospace America by Ryan Cooperman, J.D.

The American Institute of Aeronautics and Astronautics (AIAA) is calling for the Federal Aviation Administration (FAA) to establish a more predictable certification pathway for Advanced Air Mobility (AAM) aircraft, warning that regulatory uncertainty threatens United States aerospace leadership.

In a July 2, 2026, policy article published in Aerospace America, the AIAA outlined the critical balance between maintaining rigorous safety standards and fostering innovation. The publication notes that while traditional amended type certifications typically require three to five years, certifying entirely new aircraft types like AAM platforms currently takes five to nine years under existing FAA processes.

Legislative push for regulatory predictability

To address these extended timelines, bipartisan lawmakers introduced the Aviation Innovation and Global Competitiveness Act on February 13, 2026. The legislation seeks to mandate standard expected timelines for the FAA type certification process regarding AAM aircraft. It also aims to clarify the specific conditions under which the agency must require an issue paper, a regulatory step that often introduces variability into the certification timeline.

The AIAA has formally endorsed the legislation, aligning the bill with the institute’s designation of AAM and autonomous flight integration as a 2026 Aviation Priority Issue. According to Aerospace America, securing a predictable regulatory framework is vital not only for engineering progress but also for maintaining the capital investment required to bring hybrid and electric vertical takeoff and landing (eVTOL) aircraft to market.

Overcoming historical bottlenecks and workforce gaps

The push for modernization follows years of documented regulatory friction. On June 21, 2023, the Department of Transportation Office of Inspector General (DOT OIG) released a report indicating that communication and management issues had hindered the FAA’s ability to certify AAM aircraft efficiently. Congress subsequently passed the FAA Reauthorization Act of 2024 on May 16, 2024, which included specific provisions targeting AAM integration.

Beyond statutory changes, Aerospace America highlights that certification modernization is fundamentally a workforce challenge. As aircraft designs incorporate more autonomous flight systems, the FAA must attract and retain technical specialists, software engineers, and flight-test experts capable of evaluating highly complex architectures.

“The challenge is ensuring that America’s certification system can efficiently evaluate increasingly novel aircraft and enabling technologies while preserving the world’s safest aviation system,” Cooperman wrote.

AirPro News analysis

We view the AIAA’s public policy push as a reflection of broader aerospace industry frustration with the ad-hoc nature of early eVTOL certification bases. While the FAA has made strides since the 2023 DOT OIG report, the five to nine year timeline for new type certificates remains a significant barrier for manufacturers relying on continuous venture capital funding. If the Aviation Innovation and Global Competitiveness Act passes, the mandated timelines could provide financial markets with the predictability they require. However, the FAA will still face the practical hurdle of staffing enough specialized engineers to meet those statutory deadlines without compromising its safety mandate.

Sources: Aerospace America

Photo Credit: Aerospace America

Continue Reading

Regulations & Safety

FAA Awards L3Harris Contract to Modernize US Airspace Through 2045

The FAA awarded L3Harris a contract to upgrade 700+ ground stations and operate the US aircraft tracking network through 2045.

Published

on

On July 1, 2026, the Federal Aviation Administration (FAA) awarded L3Harris Technologies a contract to upgrade and operate the United States aircraft tracking network through 2045. The modernization effort will overhaul ground infrastructure to support the integration of advanced air mobility (AAM) vehicles and drones into the National Airspace System.

In a press release issued on July 1, 2026, L3Harris announced the agreement, which mandates the upgrade of at least 700 ground stations across the country. The enhanced network will provide real-time, satellite-based flight positioning data while bolstering cybersecurity measures to protect air traffic management systems. The exact monetary value of the contract was not disclosed.

Expanding surveillance for next-generation airspace

The contract extends the role of L3Harris in managing the FAA surveillance infrastructure for nearly two more decades. The upgraded ground stations are designed to handle increased network capacity, a requirement as the airspace becomes more crowded with non-traditional aircraft.

Kathy Crandall, President of Mission Networks, Space & Mission Systems at L3Harris, emphasized the operational impact of the upgrades.

“L3Harris is propelling the FAA’s modernization vision forward by delivering an advanced surveillance infrastructure that will define the future of our airspace system and ensure increased safety for all air travelers.”

Crandall added that expanding network capacity ensures the United States maintains its position in global air traffic management.

Alignment with broader FAA modernization initiatives

This surveillance contract aligns with ongoing FAA efforts to replace aging infrastructure across the National Airspace System. The agency has been executing its Facility Replacement and Radar Modernization (FRRM) strategy, which targets the replacement of over 370 air traffic control facilities and 618 radars that average 36 years of age.

L3Harris is already involved in parallel infrastructure projects for the FAA. The company is currently executing the FAA Telecommunications Infrastructure (FTI) upgrade. That project replaces legacy copper wire connections with high-speed fiber optic networks across FAA facilities, providing the bandwidth necessary to support emerging aviation technologies like electric aviation vertical takeoff and landing (eVTOL) aircraft and uncrewed aerial systems.

AirPro News analysis

The extension of the L3Harris mandate through 2045 highlights the reliance of the FAA on established defense and aerospace contractors to execute its long-term modernization goals. As the National Airspace System transitions to accommodate AAM and widespread drone operations, the data bandwidth and latency requirements for air traffic control will increase exponentially. We view the concurrent execution of the surveillance network upgrade and the FTI fiber optic rollout as a necessary synchronization. Without high-speed ground data transmission, the benefits of satellite-based, real-time tracking for low-altitude and autonomous aircraft would be severely bottlenecked.

Sources: L3Harris Technologies

Photo Credit: L3Harris Technologies

Continue Reading
Every coffee directly supports the work behind the headlines.

Support AirPro News!

Advertisement

Follow Us

newsletter

Latest

Categories

Tags

Every coffee directly supports the work behind the headlines.

Support AirPro News!

Popular News