Regulations & Safety
Engineered Materials Arresting Systems Prevent Runway Overrun Injuries
EMAS stopped a 2025 Roanoke runway overrun safely, highlighting key advances in aviation safety technology and infrastructure investment.

Aviation Safety Systems in Action: The Critical Role of Engineered Materials Arresting Systems in Preventing Catastrophic Runway Overruns
The recent incident at Roanoke-Blacksburg Regional Airport, where CommuteAir Flight 4339 overran the runway during heavy rain but was safely stopped by an Engineered Materials Arresting System (EMAS), underscores the essential role of advanced safety technologies in aviation. No injuries were reported among the 53 people aboard the United Express flight, highlighting how robust safety measures can prevent catastrophe even under adverse conditions. This event, involving a routine flight from Washington Dulles International Airport, showcased the effectiveness of EMAS, especially significant as the system had been upgraded in 2024 at a cost of $12 million.
Runway excursions remain a leading cause of aviation accidents globally. The Roanoke incident not only illustrates the persistent nature of this risk but also demonstrates the tangible benefits of investing in modern safety infrastructure. This article explores the specifics of the Roanoke case, the technology behind EMAS, broader runway safety trends, and the industry’s ongoing efforts to reduce the frequency and severity of runway excursions.
By examining expert insights, official data, and recent developments, we aim to provide a factual, balanced perspective on how safety systems like EMAS are shaping the future of aviation safety.
The Roanoke Airport Incident: A Case Study in Safety System Performance
On September 24, 2025, CommuteAir Flight 4339, operating as United Express, landed at Roanoke-Blacksburg Regional Airport amid heavy rain. The Embraer 145 jet, carrying 50 passengers and three crew, experienced a “long landing,” touching down later than intended and unable to stop on the wet runway. According to passengers, the landing was hard and late, with one describing the brakes coming on just as the plane neared the cross runway.
The aircraft overran the runway, entering the EMAS bed installed at the runway’s end. This system, upgraded in 2024, performed as designed: the jet’s wheels sank into the crushable material, decelerating the aircraft safely. All passengers and crew were evacuated without injury, and local emergency services responded promptly. The airport temporarily closed but resumed partial operations within hours, with full service restored by morning.
The Roanoke runway is approximately 1,000 feet shorter than many commercial airports, presenting unique operational challenges. Heavy rain and limited visibility further complicated the situation, demonstrating how even routine flights can encounter unexpected hazards. The incident’s resolution highlights the importance of layered safety measures, from pilot training to ground-based technologies like EMAS.
“It suddenly went down and it had a very hard but very late landing. The brakes came on just about the time they were going to hit the cross runway.” — Steve Harrison, passenger on Flight 4339
Understanding Engineered Materials Arresting Systems (EMAS)
EMAS is a ground-based safety solution designed to stop aircraft that overrun the runway. It consists of a bed of engineered, crushable material, such as cellular concrete or foamed silica, installed at the runway’s end. When an aircraft enters the EMAS, its wheels sink into the material, slowing the plane in a controlled manner and preventing more serious outcomes.
The Federal Aviation Administration (FAA) began supporting EMAS development in the 1990s to address airports where traditional safety areas could not be constructed due to space constraints. The first EMAS was installed at JFK International Airport in 1996. Today, over 120 EMAS systems are in place at more than 70 airports across the United States.
Two main EMAS technologies are currently used: EMASMAX (cellular concrete blocks) and greenEMAS (foamed silica from recycled glass). Both meet FAA standards and have a perfect safety record, since 1996, EMAS has safely stopped 25 aircraft overruns, protecting nearly 500 passengers and crew with no fatalities.
“EMAS functions like a truck emergency exit ramp or a foam pit for a gymnast, letting the plane slow down but also not be destroyed.” — Prof. Ella Atkins, Virginia Tech Aerospace Engineering
Economic and Operational Considerations
Installing EMAS is a significant investment. The Roanoke upgrade, for example, cost $12 million, funded by federal, state, and local sources, including passenger facility charges. However, the cost is justified when compared to the potential financial and human losses from a serious runway excursion.
Runway excursions can lead to aircraft damage or loss, infrastructure repairs, legal claims, and prolonged airport closures. By preventing such incidents, EMAS not only saves lives but also protects airports and airlines from substantial economic repercussions.
Insurance industry data and risk assessments increasingly recognize the value of EMAS, with some insurers factoring its presence into premium calculations. The system’s track record and growing adoption reflect a broader industry commitment to proactive risk management.
Runway Excursions: A Persistent Safety Challenge
Runway excursions, when an aircraft veers off or overruns the runway, are among the most common and dangerous types of aviation accidents. According to the International Civil Aviation Organization (ICAO), they account for the vast majority of runway-related incidents worldwide.
In 2024, runway excursions were the second most frequent accident type globally, with 20 airliner accidents reported (up from 7 in 2023). These incidents affected both jet and turboprop aircraft, with a majority occurring during landing. Certain regions, such as Africa, have seen higher rates of such accidents, underscoring the importance of context-specific safety strategies.
Business and corporate aviation is particularly affected. Between 2019 and 2024, 76 runway excursion accidents were recorded in corporate jet operations, representing 41% of all such accidents in this sector and resulting in several fatalities. Contributing factors include unstable approaches, adverse weather, and operational errors.
“Runway excursions cause serious and sometimes fatal injuries, destroy aircraft, lead to costly litigation, and negatively impact operator reputation.” — National Business Aviation Association
Weather and Human Factors
Weather is a major contributor to runway excursions. Heavy rain, poor visibility, and strong crosswinds increase the risk, as seen in the Roanoke incident and others, such as the Norwegian Boeing 737-800 overrun in Molde during a severe storm in December 2024.
Human factors also play a role. Studies indicate that nearly half of serious runway excursions are linked to unstabilized approaches, where pilots continue to land despite not meeting approach criteria. Other factors include non-adherence to procedures, wildlife on runways, and loss of situational awareness.
Addressing these risks requires a combination of technological solutions, improved training, and robust operational procedures. EMAS is one part of a broader runway safety strategy that includes regular runway inspections, enhanced weather monitoring, and data-driven decision-making.
Trends in Aviation Safety and the Impact of EMAS
Aviation safety has improved dramatically over the past decade. According to the International Air Transport Association, the global accident rate has declined steadily, with 2023 marking one of the safest years on record. While 2024 saw a slight increase in accident numbers, the overall trend remains positive.
EMAS has played a key role in this progress. In September 2025 alone, three aircraft were safely stopped by EMAS beds at different U.S. Airports, including Roanoke, Chicago Executive, and Boca Raton. Each incident ended without serious injury, demonstrating the system’s effectiveness across various aircraft types and operational contexts.
The FAA and industry leaders continue to advocate for expanded EMAS deployment, not only in the U.S. but internationally. The system’s proven success is leading to its adoption in other countries, supported by technology transfer and regulatory guidance from U.S. authorities.
“These two systems did exactly what they’re designed to do, stop aircraft safely when they go off the runway.” — FAA Administrator Bryan Bedford
Expert and Regulatory Perspectives
Experts emphasize that while EMAS is highly effective, it is intended as a last line of defense. Pilots are trained to avoid relying on it, instead aiming for stabilized approaches and safe landings under all conditions. However, when all else fails, EMAS provides a critical safety net.
Regulatory agencies, such as the FAA and National Transportation Safety Board (NTSB), continue to monitor runway safety data and update standards as needed. The NTSB has called for more proactive responses to identified risks, citing past failures to act on recurring Safety alerts as a lesson for the industry.
International organizations like ICAO and the Flight Safety Foundation provide toolkits and best practices to help airports and Airlines address runway excursion risks through a combination of infrastructure, technology, and operational improvements.
Conclusion
The Roanoke-Blacksburg Regional Airport incident is a compelling example of how modern safety systems, especially EMAS, can prevent disaster in challenging conditions. The absence of injuries or fatalities, despite a runway overrun in heavy rain, validates the significant investments made in aviation safety infrastructure. The incident also highlights the importance of continuous improvement and adaptation, as new risks, such as those posed by changing weather patterns, emerge.
Looking ahead, the aviation industry must maintain its commitment to safety through ongoing investment, innovation, and international collaboration. EMAS and similar technologies will remain vital components of runway safety, but their effectiveness depends on integration with broader strategies involving training, regulation, and data-driven risk management. As air travel continues to grow, these lessons will be essential in ensuring that aviation remains one of the safest modes of transportation.
FAQ
What is EMAS and how does it work?
EMAS (Engineered Materials Arresting System) is a bed of crushable material installed at the end of airport runways. If an aircraft overruns the runway, its wheels sink into the EMAS, slowing and stopping the plane safely.
How many lives has EMAS saved?
Since its first installation in 1996, EMAS has safely stopped 25 overrunning aircraft in the U.S., protecting nearly 500 passengers and crew with no reported fatalities.
Why are runway excursions still a concern?
Runway excursions remain common due to factors like adverse weather, operational errors, and infrastructure limitations. While safety has improved, these incidents are difficult to eliminate entirely, making systems like EMAS essential.
Who pays for EMAS installations?
Funding for EMAS typically comes from a mix of federal aviation grants, state and local contributions, and passenger facility charges.
Is EMAS used outside the United States?
While EMAS is most widely used in the U.S., its adoption is growing internationally, with the FAA supporting foreign airport installations.
Sources
Regulations & Safety
ICAO Convenes First Worldwide Air Transport Conference Since 2013
ICAO’s ATConf/7 runs November 16 to 20 in Montréal to rework aviation’s economic rules as traffic heads toward 12.4 billion passengers by 2050.

The International Civil Aviation Organization’s (ICAO) Seventh Worldwide Air Transport Conference (ATConf/7) runs from November 16 to 20, 2026, at ICAO Headquarters in Montréal, the first such conference since 2013. Its task is to produce recommendations on policy guidance and a harmonized regulatory framework for sustainable international air transport, with future actions for States and ICAO.
ICAO set out the stakes in an article published on its website on November 12, 2026, under the byline of ICAO Council President Toshiyuki Onuma: “A new global economic framework will define the next era of international air transport.” Onuma wrote that the rules and systems that once sustained aviation’s growth “must once again adapt to build a resilient, sustainable, and inclusive future.”
What ICAO says the economic rules must now absorb
Onuma’s article lists the shocks since the last conference. The COVID-19 pandemic, which he called aviation’s most serious crisis, erased demand and created intense financial stress, and the system has since faced geopolitical tensions, airspace disruptions, energy volatility and global macroeconomic uncertainty.
He named the persistent challenges ICAO wants the conference to address: infrastructure constraints, the modernization of economic regulatory frameworks, chronic supply-chain disruptions and tightening financing conditions, as well as cybersecurity, data governance, workforce skills and, “above all, the climate emergency.” Negotiations at ICAO, he wrote, are needed to ensure the commercial viability of emerging technologies and operational models and to establish the certainty needed for long-term investment.
With passenger numbers projected to reach approximately 12.4 billion by 2050, Onuma wrote that existing systems must give way to new regulatory and economic frameworks. The conference coincides with the launch of ICAO’s Strategic Plan for 2050, which envisions “air transport for all” while aiming for zero fatalities and net-zero carbon emissions. He called the meeting “a singular opportunity for delegates to re-engineer the economics of aviation.”
Six objectives and four agenda items
The ICAO Council gave the conference six objectives, according to the Secretariat’s working paper ATConf/7-WP/1, under the theme “Air Transport: Powering Global Connectivity, Economic Development and Resilience in a Dynamic World”:
- Advance economic regulatory frameworks that adapt to market trends and technology, using data.
- Improve industry resilience on workforce, supply chains, market access, emergency response and consumer protection.
- Mobilize blended financing for civil aviation infrastructure.
- Shape economic policy foundations for innovation and emerging technologies.
- Strengthen institutional and human capacity.
- Enable sustainable and inclusive air transport growth.
The agenda turns those objectives into four items. The first reviews developments since ATConf/6, including the effects of COVID-19, and the place of air transport in ICAO’s Strategic Plan 2026-2050. The second covers investment in infrastructure, people and partnerships, including financing for advanced air mobility (AAM) and AI-enabled systems with multilateral financial institutions.
The third item deals with regulatory and institutional frameworks: market access, liberalization, market concentration and fair competition; emergency planning and consumer protection, including assistance to passengers and accident victims under the Montreal Convention 1999; and, under Agenda Item 3.4, levies on international air transport, including possible cost recovery for unmanned aircraft systems (UAS) and new entrants. The fourth covers the economic regulation of AAM, artificial intelligence, suborbital and commercial space transport, access to sustainable aviation fuel (SAF) and lower carbon aviation fuels (LCAF), and air transport data and cybersecurity.
A policy forum that meets about once a decade
ATConf/7 builds on ATConf/4 in 1994, ATConf/5 in 2003 and ATConf/6 in 2013, according to WP/1. Onuma wrote that the last conference produced economic policy recommendations that prepared the sector for one of its most challenging eras, and that the ICAO Long-Term Vision for International Air Transport Liberalization adopted there is driving the creation of new markets for air services in emerging economies.
ICAO Secretary General Juan Carlos Salazar urged States to prepare for the November conference at a meeting of Directors General of Civil Aviation in Puglia, Italy, that ended on June 11, 2026. ICAO said these conferences occur about once a decade and set the global policy agenda for the economic regulation of international aviation. Onuma called for regional input to the global policy framework at the 61st Asia-Pacific directors general conference in September 2026.
WP/1 frames the economic weight of the sector the delegates are discussing: a direct contribution estimated at USD 4.1 trillion, equivalent to 3.9 percent of world gross domestic product, 86.5 million jobs, 4.6 billion passengers in 2024, and goods transported by air valued at USD 8 trillion.
What airlines have put on the table
The International Air Transport Association (IATA), an official observer at ICAO, says it submitted eight working papers, two of them jointly with Airports Council International (ACI) and two as information papers. In WP.23, IATA asks that economic regulation be proportionate, responsive and evidence-based, and that ICAO develop a Good Regulatory Practices toolkit that includes cost-benefit analysis and impact assessment.
On infrastructure costs, WP.25 calls for stronger implementation of ICAO’s charging principles of cost-relatedness, transparency and consultation, scrutiny of infrastructure investment, and independent economic oversight of airports and air navigation providers. On consumer protection, WP.24 proposes that ICAO create a standardized Air Passenger Handbook and asks governments to protect the commercial and pricing freedoms that let airlines offer varied products and fares.
On the environment, WP.30 argues that scaling SAF needs coordinated, sequenced government policies on supply, infrastructure and investment, not mandates alone, and WP.31 asks governments to reinforce the Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA) as the single global market-based mechanism and to avoid overlapping measures. A joint IATA and ACI paper, WP.65, asks that a UN Framework Convention on International Tax Cooperation respect ICAO’s aviation taxation framework.
What happens before the week ends
WP/1 schedules the formal opening for Monday, November 16, followed by the election of the Chair and Vice-Chairs, a high-level panel and the first sessions on Agenda Item 1. The tentative timetable then gives one day to each remaining agenda item and schedules approval of the conference report and adoption of a Ministerial Declaration on the final day, November 20.
The 43rd (Extraordinary) Session of the ICAO Assembly meets alongside the conference on November 19 and 20, 2026. The Assembly, ICAO’s sovereign body, is normally convened by the Council every three years; its last regular session was the 42nd Assembly in 2025. After a Protocol amending the Convention on International Civil Aviation, signed in Montréal on October 6, 2016, entered into force, Council membership grew from 36 to 40 Contracting States, and this session will elect four additional Council Members, according to ICAO’s Uniting Aviation.
Regulations & Safety
FAA Proposes Ending Paper Payments for Registration Fees and Penalties
The FAA proposes electronic-only payment for aircraft registration and recording fees, certificates and civil penalties. Comments due Jan. 4, 2027.

The FAA has proposed to stop accepting cash, money orders and paper checks for aircraft registration and recording fees, replacement airman and medical certificates, overflight fees and civil penalties, and to require electronic payment instead. Comments on the proposal are due by January 4, 2027.
The agency published the notice of proposed rulemaking (NPRM), titled “Modernizing to Electronic Payments,” in the Federal Register on November 17, 2026, under Docket No. FAA-2026-3538 (Notice No. 27-01, Regulation Identifier Number 2120-AM16). The FAA said the proposal complies with Executive Order 14247, “Modernizing Payments To and From America’s Bank Account,” which seeks to phase out paper receipts and require electronic payments to and from federal agencies.
What would change for registrants, pilots and lessors
The proposal amends payment provisions in Title 14 of the Code of Federal Regulations (14 CFR) parts 13, 47, 49, 61, 63, 65, 187 and 406. According to the NPRM, those provisions cover aviation and commercial space transportation civil penalties, aircraft registration fees, fees for aircraft recording, duplicate airmen and medical certificates, duplicate knowledge test reports, overflight fees and FAA services performed outside the United States.
Sections 47.17, 49.15, 61.29, 63.16, 65.16 and 406.9 currently list only paper payment methods. Section 47.17(b), for example, requires applications for aircraft registration services, including dealer certificates, special registration numbers and registration renewals, to be accompanied by a check or money order. The FAA proposes to replace “check and money order” with “electronic payment.” The FAA Registry already accepts electronic payments for these services through its Civil Aircraft Registry Electronic Services (CARES) portal and Pay.gov, the NPRM says.
Under part 49, the FAA collects fees for recording conveyances of aircraft, aircraft engines and propellers. The proposal would require electronic payment for those recording fees as well. For replacement airman certificates, medical certificates and knowledge test reports under section 61.29, paper payment would be removed, although requests for a replacement airman certificate could still be mailed in.
The FAA also proposes housekeeping changes in part 61: updating the medical certification post office box from 26200 to 25082 because the address has changed, and pointing the Airmen Services web address directly to amsrvs.registry.faa.gov/amsrvs. For civil penalties under sections 13.15, 13.16 and 13.18, options to pay by certified check, money order or other paper methods would be removed.
Each change would apply unless another payment method is otherwise authorized by law. The FAA also plans to revise guidance documents, including Advisory Circular (AC) Form 8050-1B, AC Form 8050-5 and AC Form 8060-56, to remove references to paper payment, and will post drafts to the docket for comment.
Bringing the rules in line with practice
The FAA says the regulatory text diverges from its current practice. The agency already asks customers to pay the fees and penalties covered by the proposal through Pay.gov, the U.S. Treasury Department’s website, and accepts electronic payments for several fees even though the rules do not mention them.
According to the NPRM, the regulations have been amended only twice since 1997 to accept electronic payments. The FAA began accepting electronic payments in 1997 for air traffic services for certain flights through the National Airspace System (NAS), by amending section 187.15(d). It amended the rules to allow credit card payment for certification services performed outside the United States in 2007, and to accept electronic payments for civil penalties in 2021.
The executive order behind the proposal was signed on March 25, 2025. It directed the Treasury Secretary to stop issuing paper checks for federal disbursements from September 30, 2025, and required payments to the government to be processed electronically as soon as practicable, with limited exceptions. The order said Treasury checks are 16 times more likely than an electronic funds transfer to be reported lost or stolen, returned undeliverable or altered. AirPro News previously covered the switch to electronic registration certificates, an earlier step away from paper at the FAA Registry.
Costs and savings
The FAA estimates the rule would save the agency $99,815 a year by ending the processing of paper payments. Over five years, it puts the savings at $457,125 at a three percent discount rate or $409,262 at seven percent, and at $1,425,933 in perpetuity. The agency expects the cost to customers of moving from paper to electronic payment to be de minimis.
Comments can be submitted under docket number FAA-2026-3538 through the Federal eRulemaking Portal at regulations.gov, by mail, by hand delivery or by fax. The FAA contact for the rulemaking is Sierra Elam of the Office of Rulemaking.
Regulations & Safety
India’s New Aviation Rules Recognize Fractional Aircraft Ownership
India’s Bharatiya Vayuyan Niyam, 2026 recognizes fractional aircraft ownership and replaces the Aircraft Rules, 1937 from January 1, 2027.

India’s new civil aviation rulebook, the Bharatiya Vayuyan Niyam, 2026, recognizes fractional ownership of aircraft, allowing one aircraft to be jointly owned as long as responsibility for its operation and maintenance is clearly identified. The rules take effect on January 1, 2027, and replace the Aircraft Rules, 1937, which served as the country’s principal aviation rulebook for decades.
The provisions were set out in a backgrounder posted on November 4, 2026, by the Government of India’s Press Information Bureau (PIB), citing the Ministry of Civil Aviation. The government notified the new rules under the Bharatiya Vayuyan Adhiniyam, 2024, the act that provides the legislative basis for the overhaul. According to the PIB, the Niyam comprises 220 rules organized into eight chapters and six schedules.
What the rules say about fractional ownership
The PIB document says the rules allow shared investment in an aircraft under arrangements that identify who is responsible for its operation and maintenance. The same section regulates aircraft imports, fractional ownership arrangements and private aircraft operations, and it states that private aircraft cannot be used for hire or reward except as permitted under the rules. The PIB summary does not give further detail on how fractional arrangements must be structured.
Registration rules sit alongside the ownership provisions. Aircraft may be registered under Category A or Category B, depending on prescribed ownership, citizenship, business registration and leasing criteria. Any change in an aircraft’s ownership or lessor must be reported immediately, and further flying is restricted until the registration requirements are met, unless the Directorate General of Civil Aviation (DGCA) grants written permission. Aircraft must display the nationality mark “VT”, followed by a hyphen and three assigned capital letters.
Leasing, deregistration and export
The government links the new rules to its aircraft leasing framework. The Protection of Interests in Aircraft Objects Act, 2025, which grew out of India’s Cape Town aircraft leasing bill, implements the Cape Town Convention framework in India. According to India Code, the government’s legislative database, the act (Act No. 17 of 2025) was enacted on April 16, 2025, came into force on May 1, 2025, and gives effect to the Cape Town Convention on International Interests in Mobile Equipment, signed on November 16, 2001, and its Aircraft Protocol.
Under the new rules, eligible applications from holders of an Irrevocable De-registration and Export Request Authorisation (IDERA) to cancel a registration must be processed within five working days. The rules also provide for the export of aircraft after deregistration. The PIB says that, over time, this may help reduce aircraft acquisition and leasing costs and ease pressure on airfares.
Fares, crews and penalties
For airlines, the rules require tariffs to be set on factors including operating costs and published digitally, and scheduled operators must submit their tariffs to the DGCA for monitoring. Booking websites and tickets must show the total amount payable and a breakdown of fares, taxes, fees and other charges. In extraordinary situations, the central government may issue proportionate, time-bound directions in the public interest.
Crew provisions cover flight and duty-time limits, minimum rest and fatigue management. Crew members may not consume alcohol or specified intoxicants within 12 hours before a flight. For cabin crew, the rules set a minimum of one member for aeroplanes with 10 to 50 seats and helicopters with 20 to 50 seats, two members for aircraft with more than 50 seats, and one more for every 50 seats or part thereof beyond 99 seats. No cabin crew member may serve on more than three aircraft types.
Personnel licensing spans 23 categories of licences, ratings and certificates for pilots, flight engineers, aircraft maintenance engineers, air traffic controllers and radio-telephone operators. On enforcement, the PIB lists 21 punishable offences carrying imprisonment of up to two years, a fine of up to ₹1 crore, or both, plus 18 compoundable offences. A graded penalty structure with ten severity levels sets monetary penalties from ₹10,000 to ₹1 crore, depending on the contravention and the size of the offender.
Design approval and the wider market
The rules also give the DGCA a defined framework for aircraft design and certification. It may issue type certificates for aircraft, engines and propellers where India is the State of Design, validate or accept foreign type certificates, and authorize the design and manufacture of aircraft components. Draft airworthiness directives are generally published on the DGCA website for 30 days for comment, subject to exceptions.
The PIB places the rewrite against the growth of India’s airport network, which it says rose from 74 operational airports in 2014 to 166 as of October 2026. The rules also allow the central government to set up a Regional Air Connectivity Fund for viability gap funding, which may be financed by a levy on domestic scheduled flights. The new rules replace Part IX of the Aircraft Rules, 1920, as well as the 1937 rules, and come into force on January 1, 2027.
-
Regulations & Safety7 days agoFAA Orders Ground Stop at All Airports After Telecommunications Outage
-
Space & Satellites6 days agoSpaceX Catches Starship From Orbit as Flight 15 Booster Is Lost
-
Commercial Aviation5 days agoLufthansa A350-1000 Brings Starlink Wi-Fi to Long-Haul on December 3
-
MRO & Manufacturing6 days agoFraunhofer Develops Laser Repair Process for Worn Landing Gear Parts
-
Business Aviation7 days agoTHC Firms Up Bombardier Order for 12 Jets With 48 Options
