The European Union Aviation Safety Agency (EASA) published its Annual Safety Review 2026 on October 22, 2026, indicating that European aviation safety performance remained stable throughout the 2025 operational year. The comprehensive statistical analysis, formally announced on October 26, 2026, tracks safety performance across all aviation domains to guide practical risk reduction actions and regulatory updates.

Advertisement

Commercial Air Transport safety performance

The review of the 2025 operational year showed that fatal accidents and fatalities remained at or below the 10-year average across most aviation domains. In Commercial Air Transport (CAT) operations involving aeroplanes, EASA recorded one fatal accident. The event involved an air taxi flight that crashed after declaring an emergency, resulting in eight fatalities.

Beyond the single fatal accident, CAT aeroplane operations in 2025 experienced 16 non-fatal accidents and 51 serious incidents. The agency also recorded 17 serious injuries within this domain. EASA attributed these injuries to a variety of operational events, including turbulence, airstair disembarkation, wake vortex encounters, Traffic Collision Avoidance System (TCAS) maneuvers, emergency evacuations, and pushback operations.

In a press release accompanying the report, EASA noted the overall stability of the European aviation system.

“The overall picture shows that, in almost all domains, the number of fatal accidents and fatalities remained at or below the average for the previous 10 years. This suggests that safety performance remained broadly stable or has been improved in most areas,” the agency stated.

Rotorcraft operations and leading safety risks

The safety data for Commercial and Specialised Helicopters operations in 2025 included one fatal accident, which resulted in three fatalities. The rotorcraft sector also recorded four non-fatal accidents and 14 serious incidents during the same 12-month period.

The Annual Safety Review identified and ranked the leading safety risks for Commercial Air Transport based on the 2025 data. The top five risks were identified as fire, smoke and pressurisation events, followed by aircraft upset, airborne collision, collision on runway, and runway excursions.

While the broader statistical trends point to a stable safety environment, EASA emphasized that risk levels fluctuate depending on the specific aviation sector. “However, the results varied between different types of operation, underlining the need for continued vigilance and targeted safety action,” the agency noted.

EASA’s evolving safety framework

The Annual Safety Review serves as a critical data-driven input for the European Safety Risk Management (SRM) process. The findings from the 2026 report will feed directly into future updates of the European Plan for Aviation Safety (EPAS), which dictates the regulatory and safety priorities for EU member states.

For the 2026 edition, EASA introduced a new six-page Annual Safety Review Summary. This addition was designed to present headline figures and leading safety risks in a more accessible format for commercial air transport aeroplanes, rotorcraft, and general aviation.

The publication of the safety review aligns with a broader push by EASA to address emerging and persistent operational risks in European airspace. Throughout October 2026, the agency updated several safety guidelines, including revisions to the Easy Access Rules for Aircrew on October 16, 2026, and the CS-GEN-MMEL on October 15, 2026. EASA also recently hosted a joint workshop with EUROCONTROL to address Europe’s Global Navigation Satellite System (GNSS) interference Action Plan, targeting a growing operational safety concern for flight crews operating in and around European airspace.

Hong Kong International Airport (HKG) and Air New Zealand (NZ) have become the first aviation organizations globally to achieve One ID Certification from the International Air Transport Association (IATA) for their digital identity and biometric processing systems.

The certifications, officially presented on October 28, 2026, at the IATA World Passenger Symposium in Macao, provide independent validation that the biometric passenger processing technologies deployed by both entities meet global industry standards for contactless travel, data handling, and privacy governance. In a press release issued by the Airport Authority Hong Kong (AAHK), the airport operator confirmed it had achieved the full set of certification areas applicable to airports.

Advertisement

Validating biometric processing

IATA recently formalized the One ID Certification program to establish an independent assessment framework for digital identity processes in commercial aviation. The program evaluates an organization’s implementation of digital identity controls, governance frameworks, and system capabilities against established IATA requirements.

The certification covers four principal areas: digitalization of admissibility, contactless travel, biometric handling, and privacy, consent, and governance. Hong Kong International Airport achieved the full set of certification areas applicable to airport operators, which include contactless travel, biometric handling, and privacy, consent, and governance. Air New Zealand was simultaneously certified, marking the first time an airline has achieved the standard.

“We are honoured that HKIA is the world’s first airport to achieve IATA One ID Certification,” Vivian Cheung, Chief Executive Officer of AAHK, stated in the release. She noted that the certification affirms the airport’s commitment to enhancing the passenger experience through innovation and demonstrates that its digital identity processes meet global standards.

The mechanics of Flight Token

The foundation of the airport’s certification is its proprietary self-service biometric identification system, known as Flight Token. The system allows passengers to navigate various departure checkpoints using facial recognition technology instead of repeatedly presenting physical travel documents and boarding passes.

Introduced in 2021, the biometric verification spans the entire departure process. Passengers can utilize the technology at check-in, bag drop, security screening, and final boarding. The AAHK, a statutory body wholly owned by the Hong Kong Special Administrative Region Government that manages and operates the airport, reports that the system has processed over 93 million passengers to date.

The infrastructure required to support this volume of biometric processing has been deployed extensively across the facility. Currently, 80% of departing passengers at the airport are eligible to utilize the Flight Token system across all departure checkpoints.

Industry shift toward paperless travel

The dual certification of a major international hub and a flag carrier represents a measurable step toward standardized paperless travel in international aviation. The broader IATA One ID initiative aims to reduce repeated document checks by allowing travelers to verify their identity before reaching the airport and use facial recognition at participating checkpoints.

Consumer acceptance of such technologies appears to be growing alongside implementation. According to IATA’s 2026 Global Passenger Survey, 78% of respondents indicated a willingness to share biometric data to avoid presenting physical travel documents at airport checkpoints.

Nick Careen, Senior Vice President for Operations, Safety and Security at IATA, emphasized the importance of standardized frameworks and stakeholder confidence, as reported by TRAICY Global.

“Digital identity can significantly simplify travel, but only when all stakeholders involved in the journey can trust how others verify identity, handle biometric data, and protect privacy,” Careen said.

AirPro News analysis

We view the introduction and initial awarding of the IATA One ID Certification as a critical mechanism for overcoming the primary barrier to global biometric travel: interoperability built on trust. While individual airports and airlines have deployed proprietary biometric systems for years, these isolated ecosystems often require passengers to re-enroll or present physical documents when transferring between different carriers or jurisdictions.

By establishing an independent baseline for privacy governance and data handling, IATA is creating the necessary framework for cross-border digital identity acceptance. The simultaneous certification of an airport and an airline highlights the dual-stakeholder cooperation required to make seamless, paperless international transit a reality. Wider global adoption of the One ID standard will now depend on ongoing cooperation between airlines, airports, and national governments regarding the legal acceptance of digital travel credentials.

The Federal Aviation Administration (FAA) has published a unified, performance-based draft regulatory framework for vertical flight infrastructure, removing previous weight and size restrictions to accommodate the incoming generation of Advanced Air Mobility (AAM) aircraft.

Released on October 22, 2026, Draft Advisory Circular 150/5390-4 consolidates and replaces existing heliport and interim vertiport guidance. According to the FAA press release, the 140-page document establishes new safety margins for downwash and outwash and sizes facilities based on specific aircraft dimensions, providing the regulatory clarity required for developers to secure federal infrastructure funding.

Advertisement

Technical shifts in the new draft

The new draft introduces specific geometric and operational standards tailored to powered-lift aircraft, which often possess different flight characteristics than traditional rotorcraft. Among the key technical updates, the draft sets a maximum approach surface slope of 15:1 for powered-lift aircraft. This is significantly shallower than the 8:1 slope standard traditionally applied to Helicopters.

To address the aerodynamic impacts of electric Vertical Takeoff and Landing (eVTOL) designs, the FAA has established a 34.5 mph rotor wash speed threshold. Exceeding this limit triggers a requirement for downwash and outwash caution area markings to protect nearby personnel and property. Additionally, the draft mandates a 10-foot (3-meter) safety margin beyond the aircraft’s rotor diameter to determine the minimum touchdown and liftoff area (TLOF).

“The next generation of aircraft is here, and we are ensuring we have the infrastructure built to support safe takeoffs and landings for them across the National Airspace System,” FAA Administrator Bryan Bedford said in the agency’s announcement.

Replacing interim vertiport guidance

Once finalized, Draft Advisory Circular 150/5390-4 will cancel two existing documents: Advisory Circular 150/5390-2D for heliport design, issued in January 2023, and Engineering Brief 105A for vertiport design, issued in December 2024.

Engineering Brief 105A served as a stopgap measure for early vertiport planning but applied strict limitations. It only covered aircraft with a maximum takeoff weight of 12,500 pounds and a wingspan of 50 feet or less. The new draft lifts these caps entirely. Instead of relying on fixed weight and size categories, the updated framework requires facility designers to size infrastructure around the specific dimensions and performance data of the aircraft intended to use it.

The FAA will host a virtual Industry Day on November 10, 2026, to brief stakeholders on the proposed changes. The public comment period remains open until January 11, 2027, and the agency expects to publish the final design standards in the summer of 2027.

Momentum in the Advanced Air Mobility sector

The infrastructure standards arrive as the AAM sector moves closer to commercialization. The FAA has been gathering real-world operational data through its eVTOL Integration Pilot Program (eIPP), which currently oversees eight projects across 26 states. Recent eIPP milestones include a demonstration flight by BETA Technologies and United Therapeutics transporting a genetically modified pig heart, as well as an automated Cargo aircraft flight conducted by Elroy Air in Louisiana.

Regulatory momentum for the aircraft themselves is also accelerating. On October 21, 2026, U.S. Transportation Secretary Sean P. Duffy announced the issuance of the first Special Airworthiness Market Survey Certificate for an eVTOL aircraft.

Bedford noted the broader economic implications of the sector, stating that the aircraft “have tremendous potential to generate new jobs, connect communities, and strengthen American leadership in aviation.”

AirPro News analysis

The lack of finalized infrastructure standards has been a primary bottleneck for the AAM sector. While aircraft certification programs dominate industry attention, commercial eVTOL operations cannot scale without standardized, FAA-approved vertiports. By shifting to a performance-based model rather than rigid weight categories, the FAA is future-proofing the National Airspace System against rapid design iterations in the powered-lift space.

Crucially, while an Advisory Circular is not a binding regulation in itself, adherence to its standards is mandatory for projects seeking federal airport grants and Passenger Facility Charge (PFC) funding. Finalizing this document in 2027 will unlock federal capital for vertiport construction, shifting AAM infrastructure development from purely private venture funding into the realm of traditional municipal finance.