MRO & Manufacturing
Emirates and GE Aerospace Expand In-House Engine Repair Capabilities
Emirates invests $300M with GE Aerospace to develop piece part repair for GE90 and GP7200 engines, enhancing Dubai’s maintenance center.

This article is based on an official press release from Emirates.
On May 14, 2026, Emirates announced a strategic agreement with GE Aerospace to develop in-house “piece part” component repair capabilities for its GE90 and GP7200 aircraft engines. The move marks a significant step toward operational self-reliance for the Dubai-based carrier.
According to the official press release, this partnership is a core component of a broader US$300 million investment aimed at expanding the Emirates Engine Maintenance Centre (EEMC) in Dubai. The facility, established in 2014, currently provides repair and maintenance services for the airline’s fleet of over 270 Commercial-Aircraft, which includes Boeing 777s, Airbus A380s, and Airbus A350s.
By bringing highly specialized engine repair processes in-house, Emirates aims to improve repair turnaround times, bypass global supply chain bottlenecks, and solidify Dubai’s position as a premier global aviation hub.
Upscaling the Emirates Engine Maintenance Centre
The agreement outlines that GE Aerospace will provide technical and training consultancy to help Emirates establish a piece part component repair line. This initiative includes comprehensive knowledge transfer, the sharing of best practices, and benchmarking for the EEMC team.
Piece part repair represents a highly specialized segment of aircraft engine maintenance. Instead of replacing entire engine modules, technicians inspect, repair, and restore individual, granular engine components. Developing this capability locally allows an Airlines to have granular control over its maintenance schedule.
Targeting the Core Fleet
The new capabilities will specifically target the GE90 engines, which exclusively power Emirates’ extensive Boeing 777 fleet, and the GP7200 engines, which power a significant portion of its Airbus A380 fleet. The GP7200 is manufactured by Engine Alliance, a joint venture between GE and Pratt & Whitney.
“We are delighted to take a strategic step in upscaling our engine repair capabilities by investing in infrastructure and partnering with GE Aerospace… Combined with the expansion of our Engine Maintenance Centre in Dubai, this will position Emirates Engineering as a centre of excellence for engine repairs providing efficient and seamless engine serviceability for Emirates.”, Adel Al Redha, Deputy President and Chief Operating Officer, Emirates
A Strategy of Self-Reliance and Supply Chain Resilience
The global aviation industry has faced severe supply chain constraints and engine servicing delays in recent years. By investing $300 million into the EEMC, Emirates is actively insulating itself from these external pressures. Reducing reliance on third-party vendors is expected to shorten repair timelines and improve long-term maintenance planning and engine serviceability.
Beyond operational efficiency for the airline, these knowledge-transfer agreements are designed to upskill the local workforce. By training engineers in highly specialized piece part repairs, Emirates is directly contributing to Dubai’s strategic vision of becoming a self-sustaining, world-leading aerospace and engineering hub.
AirPro News analysis
We view this development as part of a systematic effort by Emirates to secure maintenance capabilities for its entire engine portfolio. This GE Aerospace deal parallels a similar Memorandum of Understanding signed with Rolls-Royce in November 2025 to perform in-house MRO for the Trent 900 engines starting in 2027. By bringing complex engineering tasks in-house across multiple engine types, Emirates is taking control of its operational destiny and mitigating the risks associated with global MRO bottlenecks. Framing the $300 million EEMC expansion as an investment in human capital and specialized skills highlights the airline’s long-term strategic foresight.
Deepening a Four-Decade Partnership
GE Aerospace and Emirates share a relationship spanning four decades. In November 2025, Emirates deepened this tie by ordering 130 additional GE9X engines for its incoming Boeing 777-9 fleet, making the airline the largest GE9X customer worldwide with over 540 engines on order.
The latest agreement was signed by Adel Al Redha on behalf of Emirates, and Mohamed Ali, President & CEO of Commercial Engines & Services at GE Aerospace.
“GE Aerospace is proud to support Emirates as it expands its engine repair capabilities and further strengthens the long-term capability of UAE’s aviation ecosystem. This agreement reflects GE Aerospace’s commitment to support our customers in-service fleets for the entirety of their life cycle.”, Mohamed Ali, President & CEO, Commercial Engines & Services, GE Aerospace
Frequently Asked Questions
What is piece part engine repair?
Piece part repair is a specialized maintenance process where technicians inspect, repair, and restore individual, granular engine components rather than replacing entire engine modules. This allows for more precise and cost-effective maintenance.
Which engines are covered under the Emirates and GE Aerospace agreement?
The agreement covers the GE90 engines, which power Emirates’ Boeing 777 fleet, and the GP7200 engines, which power a portion of its Airbus A380 fleet.
How much is Emirates investing in its Engine Maintenance Centre?
Emirates is investing US$300 million to scale up the infrastructure and capabilities of the Emirates Engine Maintenance Centre (EEMC) in Dubai.
Sources
MRO & Manufacturing
Collins Aerospace Breaks Ground on Propeller MRO Facility in India
Collins Aerospace began work on a Bengaluru propeller MRO shop for ATR 42/72 and Airbus C295 fleets, with operations expected in early 2029.

Collins Aerospace broke ground on November 17, 2026, on a propeller maintenance, repair and overhaul (MRO) facility at its Collins India Operations Center (CIOC) in Bengaluru, a shop that will service propeller systems for ATR 42/72 regional turboprops and Airbus C295 military transports. The company expects it to begin operations in early 2029 with a team of up to 50 technicians and engineers.
In a press release dated November 17, 2026, RTX said the site will be India’s first propeller MRO facility authorized by a foreign aerospace original equipment manufacturer (OEM), and that it will serve operators throughout the Asia Pacific region. Collins described the project as a multi-million-dollar commitment but did not disclose the amount. It builds on more than $200 million the company said it has deployed in India over the last five years across engineering, manufacturing, testing and aftermarket propeller maintenance.
What the Bengaluru propeller shop will cover
According to the release, the facility will specialize in advanced propeller systems for the two aircraft types and will support the growth of regional air travel and military transport modernization in India and the wider Asia-Pacific region. Staffing is planned to grow beyond the initial team as service volume increases.
Ajay Mahajan, president of Advanced Structures at Collins Aerospace, said: “Today’s groundbreaking represents our commitment to strengthening India’s aviation ecosystem and meeting customer demand.” He said that as regional connectivity expands across India, high fleet availability is critical for operators, and that in-country propeller MRO capability will reduce turnaround times and operational downtime. “Support from the government of Karnataka has helped enable this investment,” Mahajan said.
The release does not name launch customers, the size of the new building or the specific propeller models and repair approvals the shop will hold.
The 568F propeller and Collins’ existing regional support
In a June 13, 2019, release from Figeac, France, Collins said its 568F six-blade propeller, used on the ATR 42 and ATR 72, had more than 30 million flight hours of service experience. At the time it launched a cost-of-ownership program covering more than 900 ATR 42/72 aircraft in over 100 countries, which it said was designed to cut average fleet operating costs by up to 20 percent, with upgrades in deicing, protective treatments and pitch change systems. The same release said Collins had broken ground on a Propeller Center of Excellence at its Figeac facility. ATR is an equal partnership between Airbus and Leonardo.
The Bengaluru shop adds to Collins’ MRO footprint in the region. In February 2022, Collins said it would quadruple its MRO space in Selangor, Malaysia, moving from a 40,000 square-foot facility to a new 160,000 square-foot facility at Subang Aerotech Park. That expansion added propeller work, along with air cycle machines, heat exchangers, engine starters, valves and actuation systems, and listed the ATR 42 and ATR 72 among the supported platforms. Daven Tey, regional director, IATA III Aftermarket Operations for Collins Aerospace, said at the time: “Our customers are eager for in-region support for their growth platforms.”
The C295 fleet taking shape in India
On the military side, the Indian Air Force (IAF) ordered 56 C295 aircraft to replace its Avro 748 fleet. When Airbus Defence and Space handed over the first aircraft in Seville in September 2023, Jean-Brice Dumont, Airbus’s Head of Military Air Systems, called the contract “the largest order in the history of the C295.” Airbus said then that the first 16 aircraft would be assembled in Seville, Spain, and that the remaining 40 would be manufactured and assembled with Tata Advanced Systems Limited (TASL) at a final assembly line in Vadodara, western India. AirPro News covered the first India-assembled C295’s test flight from that line. Airbus said in 2023 that it expected the final aircraft to be delivered to the IAF by August 2031.
In the same release, Airbus said the C295 had 283 orders from 41 operators and could carry up to 71 troops or 50 paratroopers and operate from short and unpaved runways.
The Bengaluru campus behind the project
The propeller shop will be located at the CIOC, which opened in November 2025 as a 26-acre aerospace manufacturing facility at KIADB Aerospace Park in Bengaluru. At its opening, covered in AirPro’s report on the Collins Bengaluru manufacturing hub, the company said the site would start by making seats, lighting and cargo systems, temperature sensors, communication and navigation systems, water solutions and evacuation slides, and would host more than 2,200 employees by 2026.
Collins said in that November 2025 release that it had manufactured and invested in India for nearly three decades, with more than 6,500 employees in the country across engineering, digital, manufacturing, operations and supply chain. The November 2026 release says the CIOC now supports the production of more than 70 products and manufactures mechanical, electromechanical and electronic systems using artificial intelligence, additive manufacturing and robotics.
Collins Aerospace is a business of RTX, which reports more than 180,000 employees and 2025 sales of more than $88 billion, and is headquartered in Arlington, Virginia.
MRO & Manufacturing
Deutsche Aircraft Signs KF Aerospace to Support D328eco in Canada
Deutsche Aircraft and KF Aerospace sign a letter of intent for D328eco maintenance and lifecycle support in Canada and North America.

Deutsche Aircraft has signed a Letter of Intent with KF Aerospace to build a maintenance and support network for the D328eco regional turboprop in Canada and North America, the German manufacturer announced on November 20, 2026. The agreement lines up local maintenance, repair and overhaul (MRO) capacity for the 40-seat aircraft before it has entered service.
In its press release, datelined Wessling and Kelowna, Deutsche Aircraft said the partnership aims to give regional operators in Canada and North America reliable, locally based maintenance and lifecycle support as the D328eco approaches entry into service. KF Aerospace, which the release describes as Canada’s largest commercial MRO provider, can support current D328 and future D328eco operators with scheduled inspections and the full range of MRO services. The release does not disclose financial terms, which KF facilities will be involved, or a timetable for turning the letter of intent into a firm agreement.
Support in place before service entry
Deutsche Aircraft said it is investing in in-country service infrastructure ahead of the D328eco’s entry into service, pointing to the role regional aviation plays in supporting economic activity and connecting remote communities across Canada. It called Canada one of the world’s most demanding regional aviation markets, where reliability and aftermarket support matter, especially in northern and underserved regions.
“We are deliberate in how we build our global support network,” said Alexander Tesch, Vice President Customer Support & Services at Deutsche Aircraft. He said customers must have immediate access to trusted, high-quality maintenance when the D328eco enters service, and that KF Aerospace is the ideal partner to anchor the company’s North American presence.
Nils Heuer, Director Global Sales at Deutsche Aircraft, said Canadian customers need “operational certainty and continuity” as well as a modern aircraft. Bryan Akerstream, Vice President, Business Development at KF Aerospace, said “Partnering with Deutsche Aircraft allows us to support a new generation of regional aircraft” and that the partnership aligns with the needs of Canadian operators.
Deutsche Aircraft described the agreement as part of a strategy to build a global, customer-centric MRO network for the D328eco fleet, linking its European base with regional partners in key markets. The release names no other partners in that network.
KF Aerospace’s maintenance base
KF Aerospace was founded by Barry Lapointe in 1970 as Kelowna Flightcraft Ltd. and is headquartered in Kelowna, British Columbia. According to its website, its maintenance and engineering business completes 1,000,000 maintenance hours on over 300 projects annually, with facilities in Kelowna, Vancouver and Hamilton, Ontario, and a workforce of 1,200. Its shops cover landing gear, components, non-destructive testing (NDT), avionics and composites.
Beyond MRO, KF runs a cargo feeder network in British Columbia whose primary customer is Purolator Canada. Since 2005 it has led a group of contractors providing pilot training and in-service support for the Royal Canadian Air Force (RCAF) in Southport, Manitoba, and it is a founding partner, with CAE, of SkyAlyne for the RCAF’s Future Aircrew Training program. KF is also a Transport Canada Design Approval Organization, and AirPro News covered KF’s Boeing 737-800 Combi certification in January 2026.
Where the D328eco program stands
The D328eco is a 40-seat regional turboprop powered by the Pratt & Whitney Canada PW127XT-S engine, according to Deutsche Aircraft, which is the type certificate holder for the original D328. The company rolled out the first D328eco test aircraft, TAC 1, at Oberpfaffenhofen in May 2025.
In September 2026, Deutsche Aircraft officially inaugurated the D328eco final assembly line at Leipzig/Halle Airport, an investment of more than €100 million on a 60,500-square-metre site designed for up to 48 aircraft per year, according to its third-quarter newsletter. AirPro News reported on the Leipzig line’s opening at the time.
On November 5, 2026, Deutsche Aircraft and HEGGEMANN AG announced taxi and initial flight-test validation of a new landing gear for both the existing Dornier 328 fleet and the D328eco. The tests used a dedicated Dornier 328 test aircraft, which completed its initial development flight campaign in September 2026, and certification continues with flight, structural, durability, braking, steering and operational testing. AirPro News covered the landing gear validation when it was announced.
The newsletter listed flight testing, faster certification and the ramp-up to serial production as the focus for the fourth quarter of 2026. Neither the newsletter nor the November 20 release gives an entry-into-service date. Deutsche Aircraft’s first announced D328eco customer, German operator Private Wings, signed a letter of intent for five aircraft in May 2023, when it operated nine Dornier 328 turboprops, according to Deutsche Aircraft.
MRO & Manufacturing
Embraer and Envoy Air Extend E-Jet Heavy Maintenance Agreement
Embraer will keep providing supplemental heavy maintenance for Envoy Air’s 189 E-Jets at its Macon and Fort Worth MRO facilities.

Embraer and Envoy Air have extended their heavy maintenance agreement for Envoy’s E-Jet fleet, with supplemental heavy maintenance continuing at Embraer’s maintenance, repair and overhaul (MRO) facilities in Macon, Georgia, and Fort Worth, Texas. Embraer announced the extension on November 19, 2026, and said the expanded scope increases its dedicated maintenance capacity for Envoy.
The agreement covers a large and growing fleet. Envoy, a wholly owned subsidiary of American Airlines Group and the largest regional carrier for American Airlines, currently operates 189 E-Jet aircraft and continues to accept new E-Jet deliveries from Embraer for a minimum fleet commitment of 214 aircraft, according to Embraer’s press release.
What the extension covers
Under the extension, Embraer will keep performing supplemental heavy maintenance services for Envoy at its two U.S. MRO sites. Embraer said the agreement underscores growing demand for its MRO services in North America, as operators increasingly seek solutions backed by the original equipment manufacturer (OEM) to improve fleet reliability, operational efficiency and aircraft availability.
“For nearly three decades, Envoy has partnered with Embraer to provide safe, reliable air travel for our customers,” said John Nicks, Envoy’s senior vice president of corporate services. Nicks said the agreement provides Envoy with supplemental maintenance services to support its growing E-Jet fleet, which has included additional Embraer E175 jets for regional routes.
Frank Stevens, vice president of Global MRO Centers at Embraer Services & Support, said Envoy has been a valued partner for many years. “As one of the world’s largest E-Jet operators, Envoy plays an important role in the continued success of the E-Jet program,” Stevens said.
Embraer’s Fort Worth expansion
The extension comes as Embraer grows its maintenance footprint in the United States. In Fort Worth, the company is investing approximately USD 70 million in a new commercial aviation MRO facility at Perot Field Alliance Airport. Embraer said in the November 19 release that, once completed, the expansion is expected to increase its service capacity for E-Jet operators in the United States by more than 50%.
Hillwood, a Perot company, said on October 16, 2024, that Embraer would begin operations in an existing hangar at the airport by the second quarter of 2025 and build a second hangar by 2027. Hillwood put the investment at up to $70 million, the planned increase in U.S. E-Jet service capacity at 53% and the number of new aviation jobs in Texas at about 250.
-
Space & Satellites6 days agoSpaceX Catches Starship From Orbit as Flight 15 Booster Is Lost
-
Commercial Aviation6 days agoLufthansa A350-1000 Brings Starlink Wi-Fi to Long-Haul on December 3
-
Business Aviation6 days agoLos Angeles Approves Two Sky Harbour Hangar Campus Leases at VNY
-
Company Performance4 days agoS&P Upgrades Aviation Capital Group to BBB After ITOCHU Deal Closes
-
Aircraft Orders & Deliveries5 days agoPhilippine Airlines Signs Contracts for 15 Boeing 787-10 Dreamliners
