Connect with us

Defense & Military

Embraer Opens New Delhi Office to Strengthen India Operations

Embraer inaugurates a new office in New Delhi to centralize aviation, defense, and urban air mobility operations, supporting India’s Make in India initiative.

Published

on

Photo: Embraer

Embraer Deepens India Commitment with New Delhi Office

Brazilian aerospace firm Embraer inaugurated a new corporate office in New Delhi on October 17, 2025, signaling a major reinforcement of its two-decade-long presence in India. This strategic expansion is more than just a new address; it represents a deepened commitment to one of the world’s fastest-growing aviation markets. The move aims to centralize Embraer’s diverse operations, spanning commercial aviation, defense, executive jets, and urban air mobility, under one roof, fostering greater collaboration with local partners and customers.

The significance of this inauguration is underscored by the high-profile attendees, including Brazilian Vice President Geraldo Alckmin and India’s Civil Aviation Minister Shri Kinjarapu Rammohan Naidu. Their presence highlights the strengthening bilateral ties between Brazil and India, with aerospace as a key pillar of cooperation. For years, Embraer has been a quiet but consistent player in India, with its aircraft serving the Indian Air Force, government agencies, and commercial airlines. This new office is poised to amplify that presence, aligning with India’s ambitious “Atmanirbhar Bharat” (self-reliant India) and “Make in India” initiatives.

With nearly 50 of its aircraft already operating across the country, Embraer is not a newcomer. However, the establishment of a central hub in New Delhi marks a pivotal moment. It transitions the company from a supplier to a strategic partner, ready to engage more deeply with India’s aerospace ecosystem. This includes scaling up local capabilities in engineering, procurement, and supply chain management, thereby contributing directly to the nation’s industrial and technological growth.

A Strategic Hub for Diverse Operations

The new office, located in Aerocity, is designed to be the nerve center for all of Embraer’s business units in India. This integrated approach allows for a more cohesive strategy, leveraging synergies across different sectors. In commercial aviation, Embraer’s E-Jets have been instrumental in pioneering regional connectivity since 2005. The airline Star Air, an all-Embraer operator, has successfully used these aircraft to connect tier-two and tier-three cities, a critical component of India’s UDAN (Ude Desh ka Aam Nagrik) scheme. The new office will further support these efforts, helping to expand air travel to underserved regions.

On the defense front, Embraer has a proven track record with the Indian Air Force (IAF). The ERJ145 platform serves as the foundation for the ‘Netra‘ Airborne Early Warning and Control (AEW&C) aircraft, a testament to the adaptability and reliability of Embraer’s technology. The company is also actively promoting its C-390 Millennium multi-mission transport aircraft for the IAF’s Medium Transport Aircraft (MTA) program. The New Delhi office will be crucial in advancing this proposal and fostering collaborations with local defense industries.

Beyond traditional aviation, Embraer is venturing into the future of transportation with its urban air mobility (UAM) initiatives. Eve Air Mobility, an Embraer-backed company, is already making inroads in India. It is collaborating with JetSetGo to explore the deployment of its Urban Air Traffic Management software and partnering with Hunch Mobility to study the feasibility of electric commuter flights in Bengaluru. These initiatives position India at the forefront of the emerging UAM market, with the new office serving as a catalyst for these futuristic projects.

“The opening of our New Delhi corporate office marks a bold new chapter for Embraer in India, a market central to our global vision. This office spans across all our business units and will strengthen collaboration with partners, customers, and suppliers.” – Francisco Gomes Neto, President & CEO of Embraer

Forging Local Partnerships and Fostering Self-Reliance

A key aspect of Embraer’s expanded strategy in India is its focus on local partnerships. This was prominently displayed by the signing of a Strategic Cooperation Agreement (SCA) with the Mahindra Group. This collaboration is centered on the C-390 Millennium for the IAF’s MTA program and includes joint marketing and industrialization efforts. The partnership aims to establish India as a hub for the C-390, aligning perfectly with the “Make in India” initiative by fostering domestic manufacturing and technological expertise.

This commitment to localization extends beyond defense. Embraer is actively looking to build a robust supply chain within India, sourcing components and services from local companies. By integrating Indian suppliers into its global network, Embraer not only supports the local economy but also enhances its own operational efficiency. The New Delhi office will play a pivotal role in identifying and nurturing these partnerships, ensuring that they are mutually beneficial and contribute to the long-term growth of India’s aerospace sector.

The emphasis on self-reliance is a recurring theme in Embraer’s messaging. By investing in local talent and infrastructure, the company is not just selling aircraft but is also contributing to the development of a self-sustaining aerospace ecosystem in India. This approach resonates with the Indian government’s vision and creates a strong foundation for a long-term, collaborative relationship. The new office will be instrumental in driving these initiatives, ensuring that Embraer’s growth in India is intrinsically linked to the nation’s own progress.

Conclusion: A New Trajectory for Indo-Brazilian Aerospace Cooperation

The inauguration of Embraer’s New Delhi office is a clear and decisive step towards a deeper, more integrated partnership with India. It signifies a shift from a transactional relationship to one based on shared goals and mutual growth. By centralizing its operations and aligning with India’s strategic initiatives, Embraer is positioning itself as a key player in the country’s aerospace and defense landscape for years to come. This move is not just about expanding market share; it’s about co-creating the future of aviation in India.

Looking ahead, the implications of this expansion are far-reaching. For India, it means access to cutting-edge technology, increased domestic manufacturing capabilities, and a boost to its ambitions of becoming a global aviation hub. For Embraer, it opens up a vast and dynamic market with immense potential for growth across all its business segments. The strengthening of the Indo-Brazilian partnership in the aerospace sector, as exemplified by this development, sets a precedent for future collaborations and signals a new era of cooperation between the two nations.

FAQ

Question: What is the main purpose of Embraer’s new office in New Delhi?
Answer: The new office will serve as the central hub for all of Embraer’s operations in India, including commercial aviation, defense, executive jets, services and support, and urban air mobility. It aims to strengthen collaboration with local partners and support India’s “Make in India” and “Atmanirbhar Bharat” initiatives.

Question: How long has Embraer been present in India?
Answer: Embraer has been in India for two decades, with its E-Jets beginning operations in the country in 2005.

Question: What is the significance of the partnership between Embraer and the Mahindra Group?
Answer: Embraer and Mahindra have signed a Strategic Cooperation Agreement to jointly promote the C-390 Millennium aircraft for the Indian Air Force’s Medium Transport Aircraft program. This partnership includes plans for industrialization and developing India as a hub for the aircraft.

Sources

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading
Click to comment

Leave a Reply

Defense & Military

F-35 Simulators at NAS Lemoore Connect With Six Live Navy Jets

Lockheed Martin linked four F-35 simulators at NAS Lemoore with six F/A-18s in flight, using Navy NCTE and Link-Inject-to-Live systems.

Published

on

F-35 Simulators at NAS Lemoore Connect With Six Live Navy Jets
Photo: Lockheed Martin

Four F-35 full mission simulators at Naval Air Station (NAS) Lemoore, California, have connected in real time with six F/A-18 aircraft in flight, bringing live and simulated forces together for mission rehearsal. Lockheed Martin announced the demonstration on November 17, 2026, and called it a joint training first.

The link ran over two U.S. Navy systems: the Navy Continuous Training Environment (NCTE) and Link-Inject-to-Live (LITL) ground station systems, according to the release. Both were built to mix live, virtual and constructive forces, but Navy material published in 2023 described LITL as a tool for the F/A-18 and EA-18G fleets, with connections to other platforms’ simulators still being tested at the time.

What the demonstration linked

Linking airborne F/A-18s with ground-based F-35 simulators expands training capabilities and supports more realistic mission rehearsal, Lockheed Martin said. Pilots could train against virtual adversaries alongside both the live jets and the simulated aircraft.

The company said combining simulators and live aircraft gives a fuller training experience, from repeatable mission scenarios in the simulator to the physical demands of high-G flight in the aircraft.

“When we connect live aircraft, high-fidelity simulators and virtual adversaries, we can build more realistic scenarios,” said Ken Garrett, vice president of F-35 Training and Logistics at Lockheed Martin. He added that the approach tests decision-making under pressure and better prepares pilots for critical moments.

Lockheed Martin’s release did not say which squadrons took part, how long the event lasted or on what date it took place.

The Navy systems behind the link

LITL is a live, virtual and constructive (LVC) training system fielded by the Naval Aviation Training Systems and Ranges program office (PMA-205) and the F/A-18 and EA-18G program office (PMA-265). In a NAVAIR release dated May 8, 2023, the Navy said LITL injects high-fidelity simulated air-to-air and surface-to-air targets into F/A-18E/F and EA-18G weapon systems and was projected to save millions of dollars a year.

The system was fielded aboard aircraft carriers so squadrons could continue weapons and tactics training at sea. NAVAIR said it is not limited by weather, spares squadrons from using live aircraft as adversaries and was used for hundreds of events and thousands of sorties in 2022, up from 2021. Because it is portable, it also reduces the cost of travelling to detachment sites for red air adversary support, cutting fuel and maintenance costs.

“In naval aviation, we train like we fight, and Link Inject-to-Live makes training more realistic and easier,” said Cmdr. Sarah Abbott, PMA-265’s F/A-18E/F deputy program manager, in the 2023 release.

At the time, Chuck Terry, team lead of PMA-205’s Aviation Training LVC and Strategy Department, said connections to other platform simulators were being tested to enable integrated training. “The future use cases for LITL are really exciting,” he said.

The NCTE is the Navy environment on which such live and synthetic entities are connected. A U.S. Navy article from October 3, 2022, described the Tactical Combat Training System Increment II (TCTS II) connecting live aircraft to the NCTE, where they received constructive radar warning receiver threats. In June 2022, the ANTX22 exercise combined link inject-to-live with fleet simulators at Strike Fighter Wing Atlantic, constructive threats from the Naval Aviation Distributed Training Center and two live aircraft.

The Lemoore base

NAS Lemoore is the Navy’s designated West Coast strike fighter hub and master jet base, according to a U.S. Pacific Fleet article from January 26, 2017. The first four Pacific-based F-35C Lightning II fighters arrived there on January 25, 2017, joining the reactivated Strike Fighter Squadron (VFA) 125, the Rough Raiders.

The base’s commanding officer at the time, Capt. David James, said Lemoore offered “basically unencroached airspace” for training. The same article said more F-35C squadrons were expected at the base in the years that followed.

The November 17 demonstration put F-35 simulators and airborne F/A-18s on one training network at that base. Lockheed Martin directed readers to its F-35 Lightning II training page for more information and did not announce follow-on events.

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading

Defense & Military

Boeing B-1 Load Adaptable Modular Pylon Clears Critical Design Review

Boeing’s LAM pylon for the B-1 bomber cleared critical design review, moving the external carriage design into build and test.

Published

on

Boeing B-1 Load Adaptable Modular Pylon Clears Critical Design Review
Photo: Boeing

Boeing’s Load Adaptable Modular (LAM) pylon for the B-1 bomber has completed critical design review (CDR), clearing the external carriage design to move into the build-and-test phases. At the end of the review, the U.S. Air Force B-1 program office accepts the design and establishes the system product baseline, a formal reference point for future work, Boeing said on November 17, 2026.

The pylon could double the B-1’s payload capacity and lets the bomber carry external payloads, including future advanced munitions such as hypersonic weapons, according to Boeing. The company said the added flexibility could keep the B-1 relevant through 2040 and beyond as the U.S. Air Force modernizes its bomber fleet.

What critical design review means for the program

Boeing described the CDR as a key checkpoint showing that the system design is complete, technically sound and ready for the work ahead. The company said the milestone confirms the design is mature enough for the next development phase, in which hardware and software are prepared for manufacturing, integration and test.

For the B-1 external carriage effort, Boeing and the U.S. Air Force have agreed that the design can move into the build-and-test phases. “We are starting a new chapter in this journey,” said Lynsay Brannock, Boeing B-1 program manager. “This is the moment when we shift from designing the solution to preparing to produce and test it.”

Brannock said the team’s work shows what is possible when engineers focus on a practical solution that supports the warfighter. “This milestone helps move the B-1 closer to a new capability that is both relevant and innovative,” she said.

Dan Ruder, Boeing’s Bombers Advanced Programs manager, said, “The LAM pylon gives commanders more options.” He said the pylon supports future advanced weapons and additional payload types, helping the aircraft adapt to changing mission needs.

How the pylon uses the B-1’s existing hard points

The LAM pylon mounts on the B-1 using six existing hard points originally intended for the Air-Launched Cruise Missile. In a May 26, 2026, feature, Boeing said those hard points have largely gone unused since the aircraft’s nuclear role was removed under the Strategic Arms Reduction Treaty. Repurposing them lets the bomber carry payloads externally.

The concept came from Boeing’s B-1 team in Oklahoma City, led by engineer Tristin Lam, after whom the pylon is named. Boeing said the team developed the concept under the company’s independent research and development, that Boeing owns the intellectual property, and that the program started before the U.S. Air Force requested it. “This is what makes this company special,” Ruder said, adding that anyone in the company can create something for the warfighter that helps create sustained work for Boeing and its suppliers.

From preliminary design to build and test

The CDR follows the pylon’s preliminary design review in May (PDR), which engineers at Boeing’s Oklahoma City site completed before the company reported it on May 26, 2026. Boeing said then that the PDR included leaders from Air Force Materiel Command and key industry suppliers, and that the work would move toward CDR, aircraft modification, and ground and flight testing to field the capability rapidly.

The May feature also showed a B-1B Lancer assigned to the 419th Flight Test Squadron taking off from Edwards Air Force Base, California, to conduct flight tests on the LAM pylon. Jayson Ridge, Boeing’s executive director for Bombers Modifications & Upgrades, said at the time: “This increased customer investment reflects the Air Force’s need to preserve proven capabilities.” Ridge said the Air Force is funding upgrades such as the LAM pylon because practical, cost-effective improvements provide flexibility, speed and range now, and time for a transition to future platforms.

Earlier Air Force work on external carriage

The Air Force has examined external carriage on the B-1B before. In an expanded carriage demonstration at Edwards Air Force Base, the 412th Test Wing, Air Force Global Strike Command (AFGSC) and industry partners showed external carriage on six of the bomber’s eight hard points, according to an article published by AFGSC. The demonstration used a notional hypersonic missile mock-up on a Conventional Rotary Launcher, and the bomber carried an inert Joint Air-to-Surface Standoff Missile on a pylon attached to one of the original hard points.

“Currently we can carry 24 weapons internally, now it can be increased to potentially 40,” Lt. Col. Dominic Ross, B-1B program element monitor at AFGSC, said in that article, adding that the number depends on the type of pylon. Ross said the expanded capabilities are conventional only, which keeps the aircraft compliant with the New Strategic Arms Reduction Treaty, or New START.

The same demonstration covered a long bay option, which Ross said would increase the intermediate bay capacity from 180 inches to 269 inches by moving the bulkhead. Col. Richard Barksdale, commander of the 28th Operations Group at Ellsworth Air Force Base, South Dakota, said in the article that the added capacity would make the bomber more efficient, with fewer aircraft and aircrews at risk for the same number of targets.

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading

Defense Contracts

Leonardo DRS Wins NAVAIR Production Contract for DAIRCM System

NAVAIR awarded Leonardo DRS a three-year IDIQ contract for low-rate initial production of the AN/AAQ-45 DAIRCM survivability system.

Published

on

Leonardo DRS Wins NAVAIR Production Contract for DAIRCM System
Photo: Leonardo

Naval Air Systems Command (NAVAIR) has awarded Leonardo DRS a three-year indefinite-delivery/indefinite-quantity (IDIQ) contract for low-rate initial production (LRIP) of the AN/AAQ-45 Distributed Aperture Infrared Countermeasure (DAIRCM) aircraft survivability system. The award takes DAIRCM out of the Engineering and Manufacturing Development (EMD) phase that NAVAIR funded in 2020 and into production.

Leonardo DRS announced the contract in a press release dated November 10, 2026. The release does not state the contract’s value, the number of systems to be produced or the aircraft types that will receive them.

What the production contract covers

Under the contract, Leonardo DRS will provide hardware production, aircraft integration, systems engineering, program management and associated logistics support. According to the company, DAIRCM hardware will be manufactured at its facilities in Dallas, Texas, and San Diego, California, while aircraft integration and logistics work will be carried out at its Fort Walton Beach, Florida, site.

Leonardo DRS describes DAIRCM as a combat-proven, lightweight survivability suite for small- and medium-sized aircraft with demanding size, weight and integration requirements. The modular system combines missile warning, directed infrared countermeasures, laser warning and hostile-fire indication to help protect aircraft and crews from surface-to-air threats.

The company said the LRIP award follows the program’s EMD phase, during which it incorporated capability and producibility enhancements into the system configuration. To date, the release states, DAIRCM has been deployed on aircraft operating under a Joint Urgent Operational Need Statement.

John Baylouny, president and chief executive officer of Leonardo DRS, said in the release:

“This award moves the DRS DAIRCM System into low-rate initial production and expands our ability to provide critical integrated aircraft survivability capabilities to our military customers.”

Baylouny added that the company is proud to help address evolving aircraft survivability requirements and to enhance crew protection with what he called a cost-effective advanced integrated capability.

From an urgent need to a production line

DAIRCM’s route to production began with an urgent operational requirement. In a press release dated March 18, 2020, Leonardo DRS announced that the first AN/AAQ-45(V) DAIRCM systems had been deployed on U.S. Air Force HH-60G helicopters in support of a Joint Urgent Operational Needs Statement, with the company integrating DAIRCM kits on the HH-60G under an Air Force Materiel Command contract.

On July 20, 2020, the company announced a $120 million NAVAIR contract, mixing cost-plus-incentive-fee and firm-fixed-price terms, for engineering design and test hardware. Leonardo DRS said then that the earlier urgent-needs program had fielded the system on U.S. Air Force, Army and Navy platforms, and that the EMD program would continue developing and testing improved capabilities against enhanced and future threats.

That 2020 contract covered non-recurring engineering to design, develop, integrate and test engineering development models and production-representative models of the system’s weapons replaceable assemblies for government testing. The company described an open, scalable architecture that can be optimised for different aircraft types, with a low size, weight and power design suited to rotary and tilt-wing aircraft, including emerging future vertical lift programs. Work was planned at Dallas, San Diego, Fort Walton Beach and Melbourne, Florida, with completion expected in 2024.

According to the 2020 releases, Leonardo DRS developed DAIRCM through three business units: Airborne & Intelligence Systems, Daylight Solutions, and Electro-Optical & Infrared Systems. The company said at the time that, as missile and anti-aircraft threats evolve worldwide, frontline helicopters will need a small but capable system to defeat them. Baylouny, who appears as president and chief executive officer in the November 2026 release, was quoted in both 2020 announcements as executive vice president and chief operating officer.

What the release leaves open

The November 10 release gives no contract ceiling, delivery quantities, production schedule or list of aircraft that will carry the LRIP systems.

Leonardo DRS said the DAIRCM program expands its aircraft survivability portfolio with an integrated capability designed for increasingly complex threat environments, and that it addresses the increasing evolution and proliferation of threats to airborne platforms. The company, listed on Nasdaq under the symbol DRS, says it supplies defense technologies to U.S. national security customers and allies worldwide.

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading
Advertisement

Follow Us

AirPro Atlas

Explore aviation on one 3D globe
4,000+ airports, 700+ active airlines, 180+ launch pads and 30 aircraft plants and boneyards, with live weather and launch countdowns.
Open the Atlas

aviation newsletter

Latest

Categories

Tags

Popular News