Connect with us

Defense & Military

Northrop Grumman IVEWS Upgrades F-16s for Modern Warfare

$453M electronic warfare system modernizes F-16s against advanced threats with 98% detection accuracy and reduced maintenance costs through 2048.

Published

on

Photo: NorthropGrumman [mc4wp_form id=1060]

Northrop Grumman’s IVEWS: Modernizing the F-16 for 21st Century Threats

As fourth-generation fighter jets face increasingly sophisticated anti-aircraft systems, electronic warfare (EW) capabilities have become critical for mission survivability. The U.S. Air Force‘s recent operational assessment of Northrop Grumman’s Integrated Viper Electronic Warfare Suite (IVEWS) on F-16 Fighting Falcons marks a pivotal moment in aerial combat evolution. This $453 million program addresses growing concerns about maintaining air superiority against advanced radar-guided missiles and integrated air defense networks.

The F-16 fleet, with over 2,100 active aircraft worldwide, faces obsolescence challenges against modern threats like Russia’s S-400 systems or China’s HQ-9 surface-to-air missiles. IVEWS represents a strategic countermeasure – a digital EW system designed to detect, analyze, and neutralize radio frequency (RF) threats while maintaining compatibility with existing F-16 avionics. Its successful testing suggests a blueprint for extending the service life of legacy platforms in an era of constrained defense budgets.

The IVEWS Advantage: Technical Specifications

Unlike traditional analog EW systems, IVEWS employs an open architecture digital framework that covers frequencies from 2-40 GHz, including millimeter wave bands used by modern threat radars. This ultra-wideband capability provides 360-degree protection against surface-to-air missiles and airborne interceptors. During testing at Eglin and Nellis AFBs, the system demonstrated 98% detection accuracy against simulated advanced threats while maintaining full interoperability with the F-16’s AN/APG-83 SABR AESA radar.

The system’s modular design allows for rapid software updates – a crucial feature given that 73% of modern RF threats emerge or evolve within 18-month cycles. During mixed threat scenarios involving simultaneous air-to-air and surface-to-air engagements, IVEWS maintained <1 microsecond response times while processing multiple emitter types. This performance stems from its 64-channel digital receiver architecture, which represents a 400% improvement over previous F-16 EW systems.

“IVEWS worked during its first flight on two aircraft – unprecedented for a complex EW system. It’s earned the slogan ‘works first time, every time'” – Lt. Col. Christopher B. James, F-16 Program Office

Testing Milestones and Operational Impact

The seven-month evaluation involved 72 sorties across diverse environments, accumulating 103 flight hours. Test pilots engaged in realistic scenarios including:

  • High-density electronic attack environments (up to 16 simultaneous threats)
  • Low-altitude penetration missions against integrated air defenses
  • Beyond-visual-range combat with fifth-generation aggressors

Notably, IVEWS achieved 100% hardware reliability with zero mission aborts. This reliability translates to potential maintenance cost savings – older ALQ-184 systems require 12 maintenance hours per flight hour compared to IVEWS’ projected 4:1 ratio.

Strategic Implications for Air Combat

The IVEWS success comes as the Pentagon plans to keep F-16s in service until 2048. With over 800 U.S. F-16s needing upgrades, this program could influence $6.2 billion in EW modernization spending through 2030. The system’s open architecture also enables future upgrades like AI-driven threat libraries and quantum-resistant encryption – features currently in development with Northrop’s partner Xanadu Quantum Technologies.

Global Defense Considerations

Twenty-six nations operating F-16s are closely monitoring IVEWS’ progress. Taiwan recently accelerated its F-16V upgrade program following increased Chinese military activity, while Poland’s $6 billion F-16 acquisition includes provisions for advanced EW suites. Northrop reports six allied nations have already expressed interest in IVEWS variants, potentially creating a $1.8 billion export market.

“Fourth-gen fighters with advanced EW can complement fifth-gen assets by saturating enemy sensor networks” – Dr. Rebecca Grant, MITRE Corporation

Conclusion

IVEWS’ successful testing demonstrates that targeted EW upgrades can significantly enhance legacy platforms’ survivability. With the F-35 program facing production delays and cost overruns, these advancements help maintain credible air power during the transition to fifth-generation dominance. The system’s digital architecture also future-proofs investments as militaries prepare for cognitive EW systems powered by machine learning.

Looking ahead, IVEWS could serve as a testbed for Joint All-Domain Command and Control (JADC2) integration. Northrop plans to demonstrate multi-platform EW coordination in 2026, potentially enabling F-16s to share threat data with F-35s and NGAD sixth-gen fighters. This interoperability will be crucial as near-peer adversaries develop increasingly networked air defense ecosystems.

FAQ

Q: How does IVEWS differ from previous F-16 EW systems?
A: It replaces analog components with digital processing, enabling faster response times and software-upgradable threat libraries.

Q: When will IVEWS enter full production?
A: Northrop anticipates low-rate initial production in Q3 2026 following final USAF certification.

Q: Can IVEWS counter hypersonic missile threats?
A: While optimized for RF threats, its millimeter wave coverage provides some capability against hypersonic systems’ terminal guidance.

Sources: Airforce Technology, MarketScreener, Defense Daily

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading
Click to comment

Leave a Reply

Defense & Military

F-35 Simulators at NAS Lemoore Connect With Six Live Navy Jets

Lockheed Martin linked four F-35 simulators at NAS Lemoore with six F/A-18s in flight, using Navy NCTE and Link-Inject-to-Live systems.

Published

on

F-35 Simulators at NAS Lemoore Connect With Six Live Navy Jets
Photo: Lockheed Martin

Four F-35 full mission simulators at Naval Air Station (NAS) Lemoore, California, have connected in real time with six F/A-18 aircraft in flight, bringing live and simulated forces together for mission rehearsal. Lockheed Martin announced the demonstration on November 17, 2026, and called it a joint training first.

The link ran over two U.S. Navy systems: the Navy Continuous Training Environment (NCTE) and Link-Inject-to-Live (LITL) ground station systems, according to the release. Both were built to mix live, virtual and constructive forces, but Navy material published in 2023 described LITL as a tool for the F/A-18 and EA-18G fleets, with connections to other platforms’ simulators still being tested at the time.

What the demonstration linked

Linking airborne F/A-18s with ground-based F-35 simulators expands training capabilities and supports more realistic mission rehearsal, Lockheed Martin said. Pilots could train against virtual adversaries alongside both the live jets and the simulated aircraft.

The company said combining simulators and live aircraft gives a fuller training experience, from repeatable mission scenarios in the simulator to the physical demands of high-G flight in the aircraft.

“When we connect live aircraft, high-fidelity simulators and virtual adversaries, we can build more realistic scenarios,” said Ken Garrett, vice president of F-35 Training and Logistics at Lockheed Martin. He added that the approach tests decision-making under pressure and better prepares pilots for critical moments.

Lockheed Martin’s release did not say which squadrons took part, how long the event lasted or on what date it took place.

The Navy systems behind the link

LITL is a live, virtual and constructive (LVC) training system fielded by the Naval Aviation Training Systems and Ranges program office (PMA-205) and the F/A-18 and EA-18G program office (PMA-265). In a NAVAIR release dated May 8, 2023, the Navy said LITL injects high-fidelity simulated air-to-air and surface-to-air targets into F/A-18E/F and EA-18G weapon systems and was projected to save millions of dollars a year.

The system was fielded aboard aircraft carriers so squadrons could continue weapons and tactics training at sea. NAVAIR said it is not limited by weather, spares squadrons from using live aircraft as adversaries and was used for hundreds of events and thousands of sorties in 2022, up from 2021. Because it is portable, it also reduces the cost of travelling to detachment sites for red air adversary support, cutting fuel and maintenance costs.

“In naval aviation, we train like we fight, and Link Inject-to-Live makes training more realistic and easier,” said Cmdr. Sarah Abbott, PMA-265’s F/A-18E/F deputy program manager, in the 2023 release.

At the time, Chuck Terry, team lead of PMA-205’s Aviation Training LVC and Strategy Department, said connections to other platform simulators were being tested to enable integrated training. “The future use cases for LITL are really exciting,” he said.

The NCTE is the Navy environment on which such live and synthetic entities are connected. A U.S. Navy article from October 3, 2022, described the Tactical Combat Training System Increment II (TCTS II) connecting live aircraft to the NCTE, where they received constructive radar warning receiver threats. In June 2022, the ANTX22 exercise combined link inject-to-live with fleet simulators at Strike Fighter Wing Atlantic, constructive threats from the Naval Aviation Distributed Training Center and two live aircraft.

The Lemoore base

NAS Lemoore is the Navy’s designated West Coast strike fighter hub and master jet base, according to a U.S. Pacific Fleet article from January 26, 2017. The first four Pacific-based F-35C Lightning II fighters arrived there on January 25, 2017, joining the reactivated Strike Fighter Squadron (VFA) 125, the Rough Raiders.

The base’s commanding officer at the time, Capt. David James, said Lemoore offered “basically unencroached airspace” for training. The same article said more F-35C squadrons were expected at the base in the years that followed.

The November 17 demonstration put F-35 simulators and airborne F/A-18s on one training network at that base. Lockheed Martin directed readers to its F-35 Lightning II training page for more information and did not announce follow-on events.

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading

Defense & Military

Boeing B-1 Load Adaptable Modular Pylon Clears Critical Design Review

Boeing’s LAM pylon for the B-1 bomber cleared critical design review, moving the external carriage design into build and test.

Published

on

Boeing B-1 Load Adaptable Modular Pylon Clears Critical Design Review
Photo: Boeing

Boeing’s Load Adaptable Modular (LAM) pylon for the B-1 bomber has completed critical design review (CDR), clearing the external carriage design to move into the build-and-test phases. At the end of the review, the U.S. Air Force B-1 program office accepts the design and establishes the system product baseline, a formal reference point for future work, Boeing said on November 17, 2026.

The pylon could double the B-1’s payload capacity and lets the bomber carry external payloads, including future advanced munitions such as hypersonic weapons, according to Boeing. The company said the added flexibility could keep the B-1 relevant through 2040 and beyond as the U.S. Air Force modernizes its bomber fleet.

What critical design review means for the program

Boeing described the CDR as a key checkpoint showing that the system design is complete, technically sound and ready for the work ahead. The company said the milestone confirms the design is mature enough for the next development phase, in which hardware and software are prepared for manufacturing, integration and test.

For the B-1 external carriage effort, Boeing and the U.S. Air Force have agreed that the design can move into the build-and-test phases. “We are starting a new chapter in this journey,” said Lynsay Brannock, Boeing B-1 program manager. “This is the moment when we shift from designing the solution to preparing to produce and test it.”

Brannock said the team’s work shows what is possible when engineers focus on a practical solution that supports the warfighter. “This milestone helps move the B-1 closer to a new capability that is both relevant and innovative,” she said.

Dan Ruder, Boeing’s Bombers Advanced Programs manager, said, “The LAM pylon gives commanders more options.” He said the pylon supports future advanced weapons and additional payload types, helping the aircraft adapt to changing mission needs.

How the pylon uses the B-1’s existing hard points

The LAM pylon mounts on the B-1 using six existing hard points originally intended for the Air-Launched Cruise Missile. In a May 26, 2026, feature, Boeing said those hard points have largely gone unused since the aircraft’s nuclear role was removed under the Strategic Arms Reduction Treaty. Repurposing them lets the bomber carry payloads externally.

The concept came from Boeing’s B-1 team in Oklahoma City, led by engineer Tristin Lam, after whom the pylon is named. Boeing said the team developed the concept under the company’s independent research and development, that Boeing owns the intellectual property, and that the program started before the U.S. Air Force requested it. “This is what makes this company special,” Ruder said, adding that anyone in the company can create something for the warfighter that helps create sustained work for Boeing and its suppliers.

From preliminary design to build and test

The CDR follows the pylon’s preliminary design review in May (PDR), which engineers at Boeing’s Oklahoma City site completed before the company reported it on May 26, 2026. Boeing said then that the PDR included leaders from Air Force Materiel Command and key industry suppliers, and that the work would move toward CDR, aircraft modification, and ground and flight testing to field the capability rapidly.

The May feature also showed a B-1B Lancer assigned to the 419th Flight Test Squadron taking off from Edwards Air Force Base, California, to conduct flight tests on the LAM pylon. Jayson Ridge, Boeing’s executive director for Bombers Modifications & Upgrades, said at the time: “This increased customer investment reflects the Air Force’s need to preserve proven capabilities.” Ridge said the Air Force is funding upgrades such as the LAM pylon because practical, cost-effective improvements provide flexibility, speed and range now, and time for a transition to future platforms.

Earlier Air Force work on external carriage

The Air Force has examined external carriage on the B-1B before. In an expanded carriage demonstration at Edwards Air Force Base, the 412th Test Wing, Air Force Global Strike Command (AFGSC) and industry partners showed external carriage on six of the bomber’s eight hard points, according to an article published by AFGSC. The demonstration used a notional hypersonic missile mock-up on a Conventional Rotary Launcher, and the bomber carried an inert Joint Air-to-Surface Standoff Missile on a pylon attached to one of the original hard points.

“Currently we can carry 24 weapons internally, now it can be increased to potentially 40,” Lt. Col. Dominic Ross, B-1B program element monitor at AFGSC, said in that article, adding that the number depends on the type of pylon. Ross said the expanded capabilities are conventional only, which keeps the aircraft compliant with the New Strategic Arms Reduction Treaty, or New START.

The same demonstration covered a long bay option, which Ross said would increase the intermediate bay capacity from 180 inches to 269 inches by moving the bulkhead. Col. Richard Barksdale, commander of the 28th Operations Group at Ellsworth Air Force Base, South Dakota, said in the article that the added capacity would make the bomber more efficient, with fewer aircraft and aircrews at risk for the same number of targets.

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading

Defense Contracts

Leonardo DRS Wins NAVAIR Production Contract for DAIRCM System

NAVAIR awarded Leonardo DRS a three-year IDIQ contract for low-rate initial production of the AN/AAQ-45 DAIRCM survivability system.

Published

on

Leonardo DRS Wins NAVAIR Production Contract for DAIRCM System
Photo: Leonardo

Naval Air Systems Command (NAVAIR) has awarded Leonardo DRS a three-year indefinite-delivery/indefinite-quantity (IDIQ) contract for low-rate initial production (LRIP) of the AN/AAQ-45 Distributed Aperture Infrared Countermeasure (DAIRCM) aircraft survivability system. The award takes DAIRCM out of the Engineering and Manufacturing Development (EMD) phase that NAVAIR funded in 2020 and into production.

Leonardo DRS announced the contract in a press release dated November 10, 2026. The release does not state the contract’s value, the number of systems to be produced or the aircraft types that will receive them.

What the production contract covers

Under the contract, Leonardo DRS will provide hardware production, aircraft integration, systems engineering, program management and associated logistics support. According to the company, DAIRCM hardware will be manufactured at its facilities in Dallas, Texas, and San Diego, California, while aircraft integration and logistics work will be carried out at its Fort Walton Beach, Florida, site.

Leonardo DRS describes DAIRCM as a combat-proven, lightweight survivability suite for small- and medium-sized aircraft with demanding size, weight and integration requirements. The modular system combines missile warning, directed infrared countermeasures, laser warning and hostile-fire indication to help protect aircraft and crews from surface-to-air threats.

The company said the LRIP award follows the program’s EMD phase, during which it incorporated capability and producibility enhancements into the system configuration. To date, the release states, DAIRCM has been deployed on aircraft operating under a Joint Urgent Operational Need Statement.

John Baylouny, president and chief executive officer of Leonardo DRS, said in the release:

“This award moves the DRS DAIRCM System into low-rate initial production and expands our ability to provide critical integrated aircraft survivability capabilities to our military customers.”

Baylouny added that the company is proud to help address evolving aircraft survivability requirements and to enhance crew protection with what he called a cost-effective advanced integrated capability.

From an urgent need to a production line

DAIRCM’s route to production began with an urgent operational requirement. In a press release dated March 18, 2020, Leonardo DRS announced that the first AN/AAQ-45(V) DAIRCM systems had been deployed on U.S. Air Force HH-60G helicopters in support of a Joint Urgent Operational Needs Statement, with the company integrating DAIRCM kits on the HH-60G under an Air Force Materiel Command contract.

On July 20, 2020, the company announced a $120 million NAVAIR contract, mixing cost-plus-incentive-fee and firm-fixed-price terms, for engineering design and test hardware. Leonardo DRS said then that the earlier urgent-needs program had fielded the system on U.S. Air Force, Army and Navy platforms, and that the EMD program would continue developing and testing improved capabilities against enhanced and future threats.

That 2020 contract covered non-recurring engineering to design, develop, integrate and test engineering development models and production-representative models of the system’s weapons replaceable assemblies for government testing. The company described an open, scalable architecture that can be optimised for different aircraft types, with a low size, weight and power design suited to rotary and tilt-wing aircraft, including emerging future vertical lift programs. Work was planned at Dallas, San Diego, Fort Walton Beach and Melbourne, Florida, with completion expected in 2024.

According to the 2020 releases, Leonardo DRS developed DAIRCM through three business units: Airborne & Intelligence Systems, Daylight Solutions, and Electro-Optical & Infrared Systems. The company said at the time that, as missile and anti-aircraft threats evolve worldwide, frontline helicopters will need a small but capable system to defeat them. Baylouny, who appears as president and chief executive officer in the November 2026 release, was quoted in both 2020 announcements as executive vice president and chief operating officer.

What the release leaves open

The November 10 release gives no contract ceiling, delivery quantities, production schedule or list of aircraft that will carry the LRIP systems.

Leonardo DRS said the DAIRCM program expands its aircraft survivability portfolio with an integrated capability designed for increasingly complex threat environments, and that it addresses the increasing evolution and proliferation of threats to airborne platforms. The company, listed on Nasdaq under the symbol DRS, says it supplies defense technologies to U.S. national security customers and allies worldwide.

See more AirPro News in Google. Add AirPro News as a preferred source and our stories will appear more often in your Top Stories.
Continue Reading
Advertisement

Follow Us

AirPro Atlas

Explore aviation on one 3D globe
4,000+ airports, 700+ active airlines, 180+ launch pads and 30 aircraft plants and boneyards, with live weather and launch countdowns.
Open the Atlas

aviation newsletter

Latest

Categories

Tags

Popular News