Skyservice Business Aviation has expanded its maintenance network by securing Bombardier Authorized Service Facility (ASF) designation for its Vancouver International Airport (YVR) location.

Announced in a press release on June 24, 2026, the authorization extends Bombardier’s certified maintenance coverage to Canada’s West Coast. The designation provides operators of Bombardier Global and Challenger Private-Jets with regional access to factory-approved technicians and rapid-response support.

Establishing a transcontinental support network

The Vancouver addition marks the third Skyservice facility in Canada to receive Bombardier ASF status. The YVR location joins the company’s existing authorized sites at Toronto Pearson International Airport (YYZ) and Montréal-Pierre Elliott Trudeau International Airport (YUL).

The expanded authorization allows the Vancouver facility to provide scheduled MRO, mobile repair team dispatch, and rapid-response support specifically tailored for the Bombardier Global and Challenger business jet families.

“This is an important milestone for both our organization and the customers we serve together with Bombardier,” said Benjamin Murray, President and Chief Executive Officer of Skyservice. “Expanding our Authorized Service Facility network to Vancouver strengthens coast-to-coast coverage for Bombardier operators.”

Strategic importance for trans-Pacific operations

Vancouver serves as a primary gateway for trans-Pacific business aviation traffic. The presence of a factory-authorized facility on the West Coast reduces the need for operators to position aircraft eastward for certified maintenance events or warranty work.

Anthony Cox, Vice-president of Customer Support at Bombardier, highlighted the operational benefits of the expanded Partnerships for the manufacturer’s customer base.

“Strong regional service collaborations are essential to delivering the high standards of support Bombardier customers expect,” Cox stated. “This strategic expansion enhances service coverage in a key region for both Bombardier and Skyservice’s customers.”

The ASF designation follows Skyservice’s ongoing efforts to broaden its technical capabilities for Bombardier airframes. The maintenance provider recently secured European Union Aviation Safety Agency (EASA) Supplemental Type Certificate (STC) approval for Gogo Galileo HDX inflight connectivity installations on Challenger 604, 605, and 650 aircraft.

AirPro News analysis

We view the Vancouver ASF designation as a logical geographic plug for Bombardier’s North American support network. While Toronto and Montréal cover the high-density eastern corridors, the lack of a dedicated West Coast Canadian ASF previously left a gap for operators transiting between North America and Asia. By leveraging Skyservice’s existing infrastructure at YVR, Bombardier secures critical Pacific Rim support capacity without the capital expenditure of building a new wholly-owned service center.

Sources: Skyservice Business Aviation

On June 22, 2026, JAMCO Corporation announced its participation in a Japanese government-backed consortium aimed at establishing an end-to-end supply chain for recovering and reusing carbon-fiber reinforced plastic from retired Commercial-Aircraft.

In a press release issued by the company, JAMCO detailed its role in the “Project for Building a Circular Economy Industry for Next-generation Aircraft,” an initiative launched by the New Energy and Industrial Technology Development Organization (NEDO). The project seeks to address the impending influx of composite waste as older generation aircraft reach the end of their operational lifecycles, overcoming the stringent aerospace certification hurdles that have historically limited the reuse of recycled composites in aviation.

Consortium partners and project scope

The NEDO-led initiative brings together major Japanese aerospace and research entities. Alongside JAMCO, the consortium includes Subaru Corporation, the Japan Aerospace Exploration Agency (JAXA), the Japan Fine Ceramics Center (JFCC), and Nagoya University. The group aims to create a circular economy for carbon-fiber reinforced plastic (CFRP), a material prized for its high strength-to-weight ratio that reduces aircraft fuel consumption and carbon dioxide emissions.

JAMCO will focus specifically on the application of recycled CFRP for aircraft interior components. The company stated it will participate in developing a substrate-forming process to convert recycled materials into usable forms. JAMCO is also tasked with evaluating the properties of these recycled materials, defining the strict requirements for their use in aircraft cabins, and conducting demonstration testing using actual aircraft.

The growing aircraft recycling market

The push to recycle aerospace-grade composites aligns with broader economic shifts in the commercial aviation aftermarket. The commercial aircraft disassembly and recycling market is valued at $9.67 billion in 2026, according to Market-Analysis from Invrecovery. Driven by post-pandemic fleet restructuring and the rising operating costs of older airframes, the sector is projected to grow at a 6.20 percent compound annual growth rate, reaching $15.64 billion by 2034.

Historically, the aviation industry has struggled to recycle CFRP effectively due to the degradation of material properties during the recovery process and the rigorous Safety standards required for flight. The NEDO project builds upon previous research initiatives involving Nagoya University, JFCC, Subaru, and JAMCO that focused on the fundamental technologies required to make CFRP recycling viable for aerospace applications.

AirPro News analysis

We view the successful recycling of aerospace-grade composites as one of the most significant Supply-Chain hurdles facing the next generation of aircraft Manufacturing. While metals like aluminum and titanium have established end-of-life recovery pathways, the complex resin and fiber matrices of CFRP have largely relegated retired composite structures to landfills or low-grade industrial downcycling.

By targeting aircraft interiors rather than primary load-bearing structures, JAMCO and its partners are pursuing a pragmatic entry point for recycled composites. Interior components require stringent flammability and toxicity certifications but do not face the same extreme structural fatigue cycles as wings or fuselages. If this consortium can prove the viability of recycled CFRP in cabin applications, it could establish a regulatory and industrial template for broader composite reuse across the commercial aviation sector.

Sources: JAMCO Corporation

Italian aircraft manufacturers Costruzioni Aeronautiche TECNAM S.p.A. (Tecnam) has appointed Altair Solutions as its official partner for maintenance, training, and certified pre-owned aircraft sales. The strategic agreement, announced on June 18, 2026, shifts aftermarket lifecycle support to the newly formed independent aviation services company, allowing the manufacturer to concentrate exclusively on aircraft design and production.

According to a press release issued by Tecnam, the partnership is anchored at the Capua Aerospace Hub (LIAU) in Italy. The move represents a structural separation of Tecnam’s core manufacturing business from its customer support operations, aiming to provide dedicated global service to Tecnam owners and operators.

Strategic separation of manufacturing and support

Tecnam CEO Paolo Pascale Langer stated that customer support holds equal importance to the aircraft themselves. By establishing Altair Solutions as a dedicated entity, Tecnam intends to deliver specialized expertise and responsiveness while maintaining its focus on manufacturing excellence and innovation.

Altair Solutions is led by CEO Giovanni Pascale Langer. The new company will manage the global Tecnam community’s aftermarket needs. Giovanni Pascale Langer noted that Altair was founded on the customer-centric values developed alongside Tecnam over decades, with a primary responsibility to ensure continuity and trust for operators worldwide.

“While our roots are firmly anchored in Capua and within the Tecnam ecosystem, our mindset is global. Through the relationships and expertise we have built over decades, we are committed to supporting customers wherever they operate,” Giovanni Pascale Langer said.

Expansion at the Capua Aerospace Hub

The operational base for Altair Solutions is the Capua Aerospace Hub, which recently underwent significant infrastructure upgrades. The facility now features a 1,420-metre (4,659-foot) concrete runway and more than 17,000 square metres of dedicated operational space.

Altair Solutions plans to utilize this expanded footprint to develop premium Fixed Base Operator (FBO) services. The company aims to position the Capua facility as a strategic gateway for general and business aviation in the Mediterranean region.

Giovanni Pascale Langer indicated that the airport’s transformation provides the foundation to expand capabilities across the wider general aviation sector. This planned expansion includes servicing turboprop and business jet operators beyond the immediate Tecnam ecosystem.

AirPro News analysis

The decision to spin off aftermarket services into a distinct entity reflects a maturing business model for Tecnam. As general aviation manufacturers scale their global fleets, the demands of maintenance, training, and pre-owned sales often compete for resources with core engineering and production lines. By establishing a dedicated partner led by a member of the Pascale family, Tecnam secures brand continuity while theoretically improving service agility. We view the concurrent development of the Capua Aerospace Hub as a signal that Altair intends to build a diversified revenue stream through FBO services and third-party maintenance, reducing its long-term reliance solely on the Tecnam fleet.

Sources: Tecnam Aircraft