Defense & Military
GA-ASI and US Air Force Demonstrate Advanced Manned-Unmanned Teaming
GA-ASI and the US Air Force successfully tested Manned-Unmanned Teaming with an F-35 and MQ-20 Avenger drone for the Collaborative Combat Aircraft program.

This article is based on an official press release from General Atomics Aeronautical Systems, Inc. (GA-ASI).
On May 27, 2026, General Atomics Aeronautical Systems, Inc. (GA-ASI) announced the successful completion of a major flight test demonstrating advanced Manned-Unmanned Teaming (MUM-T). The exercise paired an F-35 Lightning II fighter jet system with an uncrewed MQ-20 Avenger drone, which acted as a surrogate for the U.S. Air Force’s future Collaborative Combat Aircraft (CCA).
According to the official press release, the test successfully validated the hardware, software, and communication networks required to allow a human pilot to command a semi-autonomous drone in real-time. This marks a significant milestone in the Air Force’s push toward integrating AI-driven “loyal wingmen” into combat operations.
The demonstration was a joint effort involving GA-ASI, the F-35 Joint Program Office, Lockheed Martin, Autonodyne, and several U.S. Air-Forces units, including the 309th Software Engineering Group, 461st Flight Test Squadron, and 370th Flight Test Squadron.
Executing the Manned-Unmanned Teaming Demonstration
During the demonstration, the F-35 remained on the ground while the MQ-20 Avenger was airborne. The F-35 pilot used a tablet in the cockpit to send tactical autonomy commands to the MQ-20 via a “Bashi Pilot Vehicle Interface,” according to the provided research report.
The MQ-20 successfully received the commands, executed tactical maneuvers, and adjusted its waypoints. Furthermore, the drone transmitted critical autonomous responses, including ADS-B track data, location, altitude, and velocity, back to the F-35 pilot.
Building on Previous Milestones
This demonstration builds upon previous tests conducted in October 2025 and February 2026. During those earlier exercises, an Air Force F-22 Raptor pilot successfully controlled an MQ-20 Avenger, laying the groundwork for this most recent F-35 integration.
The Technological Backbone: TacACE and A-GRA
The success of the demonstration relied on several cutting-edge software and communication frameworks. The MQ-20 was equipped with GA-ASI’s proprietary Tactical Autonomy Ecosystem (TacACE) software. In previous tests, TacACE has demonstrated the ability to support autonomous mission execution, cooperative targeting, and stealthy “sensor-to-shooter” kill chains.
TacACE is built upon the U.S. Air Force’s Autonomy Government Reference Architecture (A-GRA). A-GRA is a government-owned, modular open-systems framework designed to standardize mission autonomy across different platforms. By decoupling the software from the vehicle hardware, A-GRA prevents “vendor lock” and allows the Air Force to rapidly integrate algorithms from various defense contractors.
Additionally, the aircraft were linked using Beyond Line of Sight (BLOS) communications. The test proved the ability of both platforms to utilize a tactical proliferated low Earth orbit (LEO) satellite data link to achieve seamless coordination.
Contextualizing the Collaborative Combat Aircraft (CCA) Program
The MQ-20 Avenger has served as a surrogate testbed for the CCA program for over five years, allowing the Air Force and GA-ASI to refine autonomy software and MUM-T concepts. The CCA program is designed to address the operational problem that crewed fighters alone cannot generate sufficient combat mass. These semi-autonomous drones are intended to fly alongside crewed fighters, acting as force multipliers for strike, air-to-air, and intelligence missions.
The Air Force is currently moving toward production for “Increment 1” of the CCA program. The service has requested nearly $1 billion in its FY2027 budget to initiate procurement of the first batch of these drones, estimated between 100 and 150 aircraft. GA-ASI is one of the primary finalists for Increment 1 with its YFQ-42A, recently named “Dark Merlin,” which began flight testing in August 2025.
“This significant warfighter integration milestone is the beginning of operational readiness for the Collaborative Combat Aircraft and demonstrates the near-term opportunities for force integration. Events like these drive home GA-ASI’s continued commitment to adoption of next-generation data links, mission autonomy, and unmanned air combat operations.”
AirPro News analysis
We observe that the successful pairing of a 5th-generation fighter’s interface with an autonomous drone proves that the “loyal wingman” concept is moving rapidly from theory to operational reality. The ability to control an uncrewed asset from a fighter cockpit via satellite data links represents a critical leap in combat networking.
Furthermore, the use of the A-GRA framework highlights a massive shift in defense procurement. The military is increasingly buying hardware and software separately, forcing traditional defense contractors to adapt to a highly competitive, open-architecture ecosystem rather than relying on proprietary, closed systems.
Frequently Asked Questions
What is Manned-Unmanned Teaming (MUM-T)?
MUM-T is a military concept where crewed aircraft (like an F-35) and uncrewed autonomous drones (like the MQ-20) operate together in a synchronized manner, sharing data and executing coordinated tactical maneuvers.
What is the Collaborative Combat Aircraft (CCA) program?
The CCA program is a U.S. Air Force initiative to develop jet-powered, semi-autonomous drones that will fly alongside crewed fighters. They are designed to be affordable, capable, and numerous, acting as force multipliers in combat scenarios.
Why was the MQ-20 Avenger used in this test?
The MQ-20 Avenger serves as a surrogate testbed. It allows the Air Force and defense contractors to test and refine the autonomy software and communication links that will eventually be installed in the actual CCA airframes, such as GA-ASI’s YFQ-42A “Dark Merlin.”
Sources
Photo Credit: General Atomics Aeronautical Systems
Defense & Military
Volatus Aerospace Advances in US Drone Dominance Program Phase II
Volatus Aerospace moves to Phase II of the U.S. Drone Dominance Program with its long-range FPV drone platform for DoD trials in June 2026.

This article is based on an official press release from Volatus Aerospace, supplemented by industry research reports.
Volatus Aerospace Inc. (TSX: FLT), a global aerospace and defense company headquartered in Canada, has officially been selected to advance to the next evaluation phase of the U.S. Drone Dominance Program Phase II. According to the company’s press release, Volatus is competing with a One-Way Attack (OWA) First-Person View (FPV) drones platform specifically designed for long-range strikes. This advancement places the company among a select group of defense contractors vying for a share of a massive U.S. Department of Defense procurement initiative.
The U.S. Drone Dominance Program represents a planned $1.1 billion investment aimed at acquiring more than 300,000 low-cost autonomous systems over approximately two years. Industry research indicates that Phase II of the program, dubbed “Gauntlet II,” will subject competitors to rigorous operational qualification activities and production readiness assessments at Camp Grayling, Michigan, in June 2026.
For Volatus Aerospace, this milestone coincides with a period of significant corporate momentum. The company recently graduated to the Toronto Stock Exchange in March 2026 and reported record first-quarter gross margins. However, the company has explicitly cautioned investors that advancing to this evaluation phase does not guarantee future prototype awards, production orders, or commercial agreements.
The U.S. Drone Dominance Program and Gauntlet II
Scaling Up Autonomous Capabilities
The Pentagon’s Drone Dominance Program is a rapid acquisition initiative designed to deploy scalable, operationally relevant uncrewed aerial systems (UAS) for contested battlefield environments. According to defense research reports, the program spans four independent phases. The overarching goal is to shift military procurement toward “attritable” mass, deploying hundreds of thousands of cost-effective, highly autonomous systems rather than relying solely on a small fleet of expensive, traditional drone platforms.
Mission Area A Requirements
During the upcoming Gauntlet II trials, the Pentagon will evaluate approximately 78 unique drone designs from 48 different companies, a significant expansion from the initially planned 18 qualifiers. Volatus Aerospace submitted its application under Mission Area A, which focuses on Long Range Strike capabilities. Research reports detail that this specific mission area requires drones to successfully engage targets up to 20 kilometers away, double the distance required in Phase I, while operating in heavily contested electronic warfare (EW) environments.
The program ultimately plans to award production contracts for five long-range designs and three close-quarters designs from the qualifying pool.
Volatus Aerospace’s Strategic Position
Financial and Operational Momentum
Volatus Aerospace enters the Gauntlet II trials backed by strong recent financial performance. In its Q1 2026 earnings report released on May 14, 2026, the company reported $5.6 million in revenue and a record gross margin of 35%. Furthermore, the company noted a working capital position of $36.4 million. Market data from late May 2026 shows the company valued at approximately $340 million, with its stock surging 335% over the past year to $0.51.
Operationally, the company has been expanding its manufacturing and defense footprint. In March 2026, Volatus announced a strategic Memorandum of Understanding (MOU) with Sentinel R&D. This collaboration is intended to support Canadian sovereign UAV manufacturing and the development of interceptor platforms for defense and security applications.
Executive Perspective
Company leadership views the advancement in the U.S. Drone Dominance Program as a validation of their broader aerospace strategy and allied industrial relationships.
“This advancement represents an important milestone for our defence and autonomy initiatives. The evolving global security environment is driving demand for scalable, resilient, and operationally practical uncrewed systems.”
AirPro News analysis
We observe that the U.S. Drone Dominance Program reflects a massive paradigm shift in modern military procurement, heavily influenced by recent global conflicts. Traditional defense strategies that relied on a small number of highly exquisite drone platforms are being supplemented, and in some tactical scenarios, replaced, by the doctrine of attritable mass. The Pentagon’s demand for 300,000 low-cost, highly autonomous kamikaze drones underscores a critical need for systems that can overwhelm enemy defenses and operate effectively even when GPS and communications are jammed.
For Volatus Aerospace, the technical performance of their OWA FPV platform at the June 2026 trials will only be half the battle. The company’s ability to demonstrate true “production readiness” and mass-manufacturing capabilities will likely be the deciding factor in whether they secure a portion of the $1.1 billion investment. While their recent financial growth and strategic partnerships are promising indicators, the transition from prototype evaluation to mass defense production remains a complex hurdle.
Frequently Asked Questions (FAQ)
- What is the U.S. Drone Dominance Program?
It is a U.S. Department of Defense rapid acquisition initiative with a planned $1.1 billion budget, aimed at procuring over 300,000 low-cost, scalable, and autonomous uncrewed aerial systems for contested environments. - What type of drone is Volatus Aerospace developing for this program?
Volatus is competing with a One-Way Attack (OWA) First-Person View (FPV) drone platform designed for Long Range Strike missions (up to 20 kilometers). - Does advancing to Phase II guarantee a contract for Volatus Aerospace?
No. The company has explicitly stated that advancing to the evaluation phase does not guarantee future selection, prototype awards, or production orders. - When are the next trials?
The Phase II evaluations, known as “Gauntlet II,” are scheduled to take place at Camp Grayling, Michigan, in June 2026.
Sources: Volatus Aerospace Press Release (via Yahoo Finance), Independent Industry Research Report (May 26, 2026).
Photo Credit: Volatus Aerospace
Defense & Military
ITPS Canada Orders Leonardo M-346 T Block 20 Trainers for 2029
ITPS Canada orders six Leonardo M-346 T Block 20 advanced jet trainers to enhance tactical pilot training at North Bay from 2029.

This article is based on an official press release from Leonardo.
In a significant move for the North American defense training sector, ITPS Canada (International Test Pilots School) has officially ordered six Leonardo M-346 T Block 20 advanced jet trainers, with an option to acquire six additional military aircraft. According to a press release from Italian aerospace manufacturers Leonardo, the new fleet will be stationed at the International Tactical Training Centre (ITTC) in North Bay, Ontario, and is scheduled to enter service in 2029.
This acquisition marks a major milestone, establishing the first privately operated Leonardo M-346 fighter trainer fleet in North America. As NATO and allied air forces face mounting challenges in generating enough pilots for fourth- and fifth-generation fighters, this procurement aims to bridge the gap by modernizing ITPS Canada’s training capabilities to meet evolving operational requirements.
The contract was recently signed by ITPS Executive Chairman Giorgio Clementi at Leonardo’s Venegono plant in Italy. The signing ceremony included a final evaluation flight of the aircraft. While the strategic importance of the deal is clear, the exact monetary value of the contract has not been publicly disclosed by either party.
The M-346 T Block 20: A Technological Leap in Pilot Training
Next-Generation Cockpit and AI Integration
The aircraft selected by ITPS Canada represents the latest iteration of Leonardo’s proven trainer platform. Officially launched at the Farnborough International Air Show in July 2024, the “Block 20” standard introduces comprehensive capability enhancements designed to align pilot skills with the demands of modern multi-domain battlefields. According to the manufacturer’s specifications, the Block 20 features a completely renewed cockpit, replacing the legacy six Multi-Functional Displays (MFD) with two Large Area Displays (LAD), one for each seat, complemented by a low-profile Head-Up Display (HUD).
Beyond hardware upgrades, the new trainers incorporate advanced digital and artificial intelligence features. Leonardo notes that the Ground-Based Training System (GBTS) utilizes virtual reality and AI applications to personalize training paths based on biometric and flight data. Furthermore, the system introduces autonomous AI agents into synthetic scenarios, significantly increasing the complexity and realism of tactical training for student pilots.
Performance and Evaluation
The M-346 is widely recognized for its high thrust-to-weight ratio, wide flight envelope, and extreme maneuverability. These characteristics allow the aircraft to accurately emulate the flight conditions and sensor management of new-generation combat aircraft. The decision to acquire the M-346 followed a rigorous evaluation process. In October 2025, ITPS CEO Dave Lohse conducted an airborne evaluation of the advanced jet trainer in the airspace north of Ottawa International Airport, ultimately validating the platform’s suitability for the ITTC’s needs.
Expanding Canada’s Role as a Tactical Training Hub
Meeting Global Demand
With over 25 years of experience, ITPS provides advanced military tactical training and flight test training to more than 29 air arms globally. The company’s ITTC division currently addresses the demand for advanced tactical training services from over ten different air forces worldwide. The deployment of these advanced trainers in North Bay, Ontario, is expected to bolster Canada’s position as a premier multinational aviation training hub.
“The M-346 continues Italy’s illustrious track record of producing world-leading jet trainer aircraft. The new trainers are expected to enter service at the company’s International Tactical Training Centre base in North Bay (Ontario) starting in 2029, providing a major contribution to the first capability enhancement project of the ITTC fleet, currently active in providing training to several international customers and to meet advanced tactical training service demand from in excess of ten different air forces globally.”
, Giorgio Clementi, Executive Chairman of ITPS, in a statement provided by Leonardo.
AirPro News analysis
At AirPro News, we observe that this agreement highlights a rapidly accelerating trend within the global defense industry: the privatization of advanced military training. State militaries are increasingly relying on private defense contractors like ITPS to provide advanced tactical training and “Red Air” (adversary) services.
This outsourcing model is highly cost-effective. By utilizing high-performance, AI-equipped trainers like the M-346 T Block 20 for complex synthetic engagements, allied air forces can save the precious airframe life of expensive fifth-generation fighters, such as the F-35, reserving them for actual combat operations rather than routine training sorties. Furthermore, the expansion of the ITTC fleet in North Bay signals a significant economic and strategic boost for the region, cementing its status as a critical node for international defense preparation.
Frequently Asked Questions
What is the Leonardo M-346 T Block 20?
The M-346 T Block 20 is the latest standard of Leonardo’s advanced lead-in jet trainer. Launched in July 2024, it features a modernized cockpit with Large Area Displays, a low-profile HUD, and extensive integration of artificial intelligence and virtual reality in its ground-based training systems.
When will the new aircraft enter service in Canada?
The six confirmed M-346 trainers are expected to enter service at the International Tactical Training Centre (ITTC) in North Bay, Ontario, starting in 2029.
Why are private companies buying military jet trainers?
Private defense contractors like ITPS acquire advanced military hardware to provide outsourced tactical training and adversary (“Red Air”) services to state militaries. This allows air forces to train their pilots against realistic threats without putting unnecessary wear and tear on their own expensive frontline combat aircraft.
Sources:
Photo Credit: Leonardo
Defense & Military
Deutsche Aircraft Unveils Crewed-Uncrewed Aviation Concept for ILA Berlin 2026
Deutsche Aircraft introduces a crewed-uncrewed teaming concept with the D328MR and UAV for multi-role missions at ILA Berlin 2026.

This article is based on an official press release from Deutsche Aircraft.
Deutsche Aircraft Unveils Crewed-Uncrewed Teaming Concept Ahead of ILA Berlin 2026
Ahead of the Air-Shows ILA Berlin 2026 aerospace trade show, scheduled for June 10 through June 14, 2026, German Manufacturers Deutsche Aircraft has announced a major expansion of its aviation portfolio. According to an official company press release, the manufacturer is introducing a new uncrewed aerial system designed to operate in tandem with its crewed D328® Multi Role (MR) turboprop.
This integrated “crewed-uncrewed” teaming concept is engineered to provide European governmental and civil operators with highly flexible, sovereign solutions for mission-critical operations. The company notes that the combined fleet approach will support a variety of demanding applications, including border control, maritime surveillance, and medical evacuation.
By developing these capabilities domestically, Deutsche Aircraft aims to address the growing demand for turnkey, multi-role aircraft configurations among European defense and public-sector agencies. The upcoming showcase in Berlin will serve as the primary platform to demonstrate these new operational synergies to the global aerospace ecosystem.
The D328® Multi Role and Uncrewed Teaming Concept
Expanding the Dornier Legacy
The foundation of this new portfolio is the D328MR, a civil-certified, commercial off-the-shelf (COTS) aircraft built upon the proven legacy of the Dornier 328 platform. Deutsche Aircraft states that the D328MR is optimized for demanding environments, boasting short-field performance and the ability to operate from unprepared runways. Furthermore, the aircraft features interchangeable cabin modules, allowing operators to quickly reconfigure the airframe for different operational roles such as intelligence, surveillance, and reconnaissance (ISR), search and rescue, and tactical transport.
Integrating Uncrewed Assets
To enhance the baseline capabilities of the D328MR, Deutsche Aircraft is introducing a complementary uncrewed aerial vehicle (UAV). In mixed-fleet scenarios, the press release details that the crewed D328MR will serve as the primary mission hardware. Meanwhile, the uncrewed vehicle will act as a data-gathering complement, delivering wide-area maritime and border surveillance coverage and effectively extending the operational range of the primary aircraft.
ILA Berlin 2026 Showcase and Strategic Vision
Static Displays and Autonomous Refueling
During ILA Berlin 2026, Deutsche Aircraft will be located at the BDLI Joint Pavilion (Booth C-342). The company announced that it will feature an active front-line European Border and Coast Guard Agency (FRONTEX) D328 on static display, presented in cooperation with Dutch aviation provider EASP Air NL. Alongside the aircraft, the manufacturer will showcase an autonomous refueling pod, which highlights the platform’s capacity for flexible, long-endurance missions.
Emphasizing the strategic importance of this portfolio expansion, Nico Neumann, CEO of Deutsche Aircraft, highlighted the need for domestic adaptability in the public sector.
“Europe needs sovereign, flexible and future-proof aviation solutions for public-sector operations. With the D328MR, complemented by uncrewed capabilities, we are offering a portfolio that allows authorities to select the right platforms for each mission, based on civilian certification, safety and long-term operational sovereignty.”
AirPro News analysis
We observe that a major driving force behind Deutsche Aircraft’s portfolio expansion is the growing mandate among European agencies to achieve local technical sovereignty. By keeping the industrialization, parts production, system integration, and commercial delivery of the uncrewed program entirely within Germany, the manufacturer ensures that critical industrial knowledge remains within the European region.
Furthermore, geopolitical volatility has clearly spurred a surge in government demand for multi-role aircraft configurations. Industry data indicates that approximately 30% of the global Dornier 328 fleet already operates in non-civil roles. As governments and defense agencies increasingly seek turnkey, mixed-fleet solutions, the combination of crewed and uncrewed assets offers a compelling value proposition: lower operating costs, the benefits of civilian certification, and the agility to adapt to rapidly changing mission parameters.
Frequently Asked Questions (FAQ)
When and where is ILA Berlin 2026 taking place?
ILA Berlin 2026 is scheduled to take place from June 10 to June 14, 2026, at the Berlin ExpoCenter Airport. Deutsche Aircraft will be exhibiting at Booth C-342.
What is the D328® Multi Role (MR)?
The D328MR is a civil-certified, commercial off-the-shelf turboprop aircraft designed for public-sector missions, including ISR, search and rescue, and medical evacuation. It features interchangeable cabin modules and short-field performance capabilities.
How does the crewed-uncrewed teaming concept work?
In this configuration, the crewed D328MR acts as the primary mission command and hardware platform, while a complementary uncrewed aerial vehicle (UAV) conducts wide-area data gathering and surveillance, extending the overall operational range.
Sources: Deutsche Aircraft Press Release
Photo Credit: Deutsche Aircraft
-
Regulations & Safety5 days agoAAIB Report Details Leonardo AW139 Tail Rotor Bearing Near-Miss
-
Space & Satellites6 days agoBlue Origin $600M Expansion Boosts New Glenn Manufacturing in Florida
-
Regulations & Safety3 days agoNTSB Urges FAA to Update Runway Condition Assessment Matrix for Heavy Rain
-
Launch Activities7 days agoSpaceX Launches Starship Flight 12 with Upgraded Version 3 Rocket
-
MRO & Manufacturing7 days agoChemical Leak Emergency at GKN Aerospace in Garden Grove California
