MRO & Manufacturing
Veryon and Airbus Helicopters Expand Partnership with Shared Delegation Model
Veryon and Airbus Helicopters renew partnership, introducing a Shared Delegation Model and enhanced CAMO services with integrated maintenance data platforms.
This article is based on an official press release.
Veryon and Airbus Helicopters Expand Partnership with New ‘Shared Delegation’ Model
Aviation management software provider Veryon has announced the renewal and significant expansion of its partnership with Airbus Helicopters. The agreement, finalized on March 3, 2026, introduces new capabilities designed to streamline maintenance operations and enhance data connectivity for helicopter operators worldwide.
According to the company’s announcement, the expanded collaboration focuses on two primary advancements: the authorization of Airbus Helicopters to use Veryon Tracking+ for Continuing Airworthiness Management Organization (CAMO) services, and the introduction of a “Shared Delegation Model.” This new model aims to help operators transition from fully outsourced maintenance management to internal self-reliance.
As an “Elite Airbus Helicopters Partner,” Veryon, formerly known as ATP, continues to integrate its software ecosystem directly into the manufacturer’s global support network. The move signals a broader industry shift toward unified digital platforms that serve as a “single source of truth” for aircraft maintenance data.
Introducing the Shared Delegation Model
The centerpiece of this renewed agreement is the Shared Delegation Model, a framework designed to support operators who may currently lack the internal infrastructure to handle complex airworthiness compliance but wish to build that capability over time.
Under traditional outsourcing models, a third party handles all CAMO tasks, leaving the operator with little visibility or control. Veryon’s press release outlines that the new model allows operators to begin by outsourcing these tasks to Airbus and Veryon. However, unlike standard contracts, this arrangement uses the Veryon platform as a training ground.
Operators can use the software to learn regulatory and maintenance processes, gradually taking over airworthiness management duties as their internal expertise grows. This approach is particularly targeted at operators in tourism and remote regions who require high safety standards but may face challenges in staffing full-time technical back-office teams immediately.
Enhancing CAMO Services and Data Unity
In addition to the delegation model, the partnership authorizes Airbus Helicopters to utilize Veryon Tracking+ (formerly Rusada Envision) to deliver CAMO services to a broader range of aircraft. This authorization allows the manufacturer to offer “turnkey” maintenance management, effectively handling the regulatory paperwork for customers who prefer to focus solely on flight operations.
The integration also emphasizes data connectivity. By linking Veryon’s platforms with Airbus systems, the companies aim to eliminate data silos, such as disparate spreadsheets and paper logs, that often plague maintenance departments. Bethany Little, CEO of Veryon, highlighted the operational benefits of this unification in the company’s statement.
“This expanded partnership… provides our OEM customers with tools to unify data from multiple sources and deliver operators the insights they need to maximize aircraft availability.”
, Bethany Little, CEO of Veryon
AirPro News Analysis: The Strategic Shift to Digital MRO
The following section contains analysis by AirPro News based on industry trends and the provided source material.
This partnership reflects a critical evolution in the aviation maintenance sector. Manufacturers like Airbus are increasingly moving beyond hardware production to become digital enablers. By partnering with specialized software firms like Veryon rather than building proprietary tools from scratch, OEMs are acknowledging a “best-of-breed” strategy.
We observe two key industry drivers behind this expansion:
- The Technician Shortage: The aviation industry continues to face a shortage of skilled mechanics. Tools that automate compliance and inventory tracking allow limited staff to focus on physical repairs rather than administrative burdens.
- Downtime Cost Reduction: With the “Digital MRO” market projected to grow significantly, operators are under pressure to reduce aircraft downtime. Veryon claims its users see a 23% reduction in downtime costs, a metric that is likely a primary selling point for Airbus’s cost-conscious customers.
Company Background and Integration
Veryon, headquartered in the United States, rebranded in 2023 following the acquisitions of Flightdocs and Rusada. The company currently serves over 5,500 customers and supports approximately 75,000 maintenance professionals globally.
The partnership leverages Veryon’s integration with Airbus Skywise, an open data platform. This connectivity ensures that maintenance data entered into Veryon’s system automatically updates Airbus records, reducing the risk of manual entry errors and ensuring that supply chain requests are triggered more efficiently.
Frequently Asked Questions
What is the Shared Delegation Model?
It is a collaborative framework where operators initially outsource airworthiness management to Airbus/Veryon but use the software to train their own staff, eventually transitioning to self-managed operations.
What software is involved in this partnership?
The deal primarily utilizes Veryon Tracking+ (a comprehensive MRO solution formerly known as Rusada Envision) and Veryon Tracking (formerly Flightdocs), along with integrations into Airbus’s Skywise platform.
Who benefits most from this expansion?
While available to all customers, the expanded services are particularly beneficial for smaller operators, tourism fleets, and those in remote locations who need “turnkey” maintenance support or a pathway to building their own CAMO capabilities.
Sources
Photo Credit: Veryon
MRO & Manufacturing
Baxter Aerospace Invests $19.55M in Utah Manufacturing Facility
Baxter Aerospace expands into Washington County, Utah with a $19.55M facility to scale UAS and satellite comms production.
Baxter Aerospace will invest $19.55 million to lease and equip a new manufacturing facility in Washington County, Utah, transitioning its unmanned aircraft and communications systems from prototype development into full-scale production.
The expansion, announced in an October 8, 2026, press release by the Utah Governor’s Office of Economic Development (GOED), is projected to create 90 high-paying jobs over the next five years while strengthening the state’s aerospace and defense industrial base.
Transitioning to full-scale production
The new facility in Washington City will feature high-capacity infrastructure, specialized testing spaces, and security systems. This site is designed to support mission-critical work across aerospace, defense, satellite communications, autonomous aircraft, and public safety.
Baxter Aerospace CEO Jeff Baxter stated that expanding in southern Utah allows the company to increase manufacturing capacity and support growing customer needs. He noted the company is prepared to help shape the region’s aerospace future.
The project is backed by a Rural Economic Development Tax Increment Financing (REDTIF) post-performance tax credit approved by the GOED. Under the agreement, Baxter Aerospace can earn a rebate of up to 30% on new state revenues generated over the five-year term, capped at $456,939.
State officials project the expansion will generate $20,758,160 in new state wages and $1,523,131 in new state tax revenue during that period. GOED Commissioner Jefferson Moss noted that the investment signals Utah’s economic future is fueled by frontier innovation. Washington County Commissioner Adam Snow added that the expansion connects local talent with emerging aerospace opportunities.
Scaling the BA-1 Dragonfly and defense portfolio
The manufacturing expansion follows a period of steady growth for the St. George-based defense and aerospace innovator. Brothers Jeff and Michael Baxter founded the company in 2015 following a severe Oregon wildfire, focusing their initial efforts on real-time sensing, resilient communications, and autonomous systems for emergency response and defense applications.
The company’s flagship aerospace product is the BA-1 Dragonfly. The Dragonfly is a Group 3 vertical takeoff and landing (eVTOL) unmanned aircraft system designed for intelligence, surveillance, and reconnaissance (ISR) missions, featuring over 12 hours of endurance.
Alongside the BA-1 Dragonfly, Baxter Aerospace produces deployable broadband satellite communications kits that utilize low Earth orbit (LEO) networks. The company also manufactures precision components for the fusion and nuclear energy sectors.
To support the scaling of these product lines, Baxter Aerospace secured a $6 million Series A funding round in July 2025. The capital was raised from the Department of Defense (DoD) Accelerator fund, managed by Accuidity Capital Management, specifically to accelerate production of the Dragonfly system and the deployable communications kits. The new Washington County facility represents the physical infrastructure required to execute that production scale-up between late 2026 and 2031.
Photo Credit: Utah Governor’s Office of Economic Development
MRO & Manufacturing
IAI 777-300ERSF P2F Conversions Launch in North America
The first Boeing 777-300ER for P2F conversion in North America arrives at Ascent Aviation Services in Marana, Arizona.
The first Boeing 777-300ER slated for passenger-to-freighter (P2F) conversion in North America arrived at Ascent Aviation Services in Marana, Arizona, on October 22, 2026. The induction marks the regional launch of the Israel Aerospace Industries (IAI) modification program for the widebody twinjet.
The arrival of the World Star Aviation aircraft initiates operations at a newly expanded site designed to increase global capacity for the Boeing 777-300ERSF program, according to a joint press release issued by the companies.
Expanding global conversion capacity
Ascent Aviation Services, an independent aircraft aftermarket service provider and Federal Aviation Administration (FAA) Class IV Part 145 certified repair station, will operate two parallel conversion lines at its Pinal Air Park campus. To accommodate the Boeing 777-300ERSF program, the company invested $70 million to construct two 90,000-square-foot widebody hangars. Ascent broke ground on the facilities on March 29, 2024, effectively tripling the site’s hangar capacity.
“The launch of Boeing 777-300ERSF conversions in North America marks an important milestone for IAI’s global conversion program,” Yaacov Berkovitz, executive vice president and general manager of IAI Aviation Group, stated in the release. “Together with Ascent Aviation Services, we are expanding production capacity and bringing our conversion capabilities closer to customers in the region.”
Ascent Aviation Services chief executive officer David Querio noted that the induction represents the beginning of a long-term partnership with IAI, with multiple Boeing 777-300ERSF conversions planned for the Marana site.
“Our vision is to shape the future of aviation by turning engineering innovation into lasting value for our customers,” IAI president and chief executive officer Guy Bar Lev added. “Passenger-to-freighter conversions are a key part of that vision, extending the productive life of aircraft and helping airlines adapt to changing market needs.”
World Star Aviation’s fleet strategy
The inaugural aircraft belongs to World Star Aviation, a full-service aircraft and engine lessor headquartered in London. The company specializes in mid-to-late life assets and manages a portfolio of approximately 150 aircraft and engines. This includes 60 narrowbody and widebody freighters currently on lease to cargo operators globally.
World Star Aviation partner Yoyo Allalouf cited the strength of the IAI program during a critical period for widebody passenger-to-freighter production as the primary driver for their selection.
“IAI’s dominance in the widebody P2F space, demonstrated by its Boeing 747 and 767 programs, together with our long-standing relationship, underpinned our decision to choose IAI for the 777-300ERSF,” added Garreth Slevin, partner at World Star Aviation.
The rise of the “Big Twin” freighter
The Boeing 777-300ERSF program, marketed as “The Big Twin,” launched on October 22, 2019, as a joint venture between IAI and GECAS, which was subsequently acquired by AerCap. It remains the only certified P2F conversion program for the Boeing 777-300ER.
The converted freighter offers 25 percent more cargo volume than a production Boeing 777-200LRF and 15 percent more volume than a Boeing 747-400BCF. This capacity positions the aircraft as a direct replacement for aging Boeing 747-400 and McDonnell Douglas MD-11 freighter fleets.
IAI brings over 50 years of experience to the program, having delivered more than 350 converted cargo aircraft across Boeing 747, 767, 737, and Airbus A330 platforms. The company currently holds a dominant market share in medium-size freighter conversions, particularly with the Boeing 767.
The 777-300ERSF recently transitioned from certification into commercial service. In August 2026, Challenge Group took delivery of its second 777-300ERSF, which marked the fifth redelivery of the type across the industry for the year.
AirPro News analysis
We view the activation of the Marana conversion lines as a critical step in maturing the Boeing 777-300ERSF program. By establishing a North American footprint, IAI mitigates geographic bottlenecks and provides operators with a domestic option for heavy modifications. The $70 million infrastructure investment by Ascent Aviation Services indicates strong long-term confidence in the widebody conversion market, even as the air cargo sector normalizes following pandemic-era peaks. As legacy quad-engine and tri-engine freighters approach mandatory retirement or become economically unviable, the availability of parallel conversion lines in the United States ensures IAI can capture a significant share of the impending widebody replacement cycle.
Photo Credit: IAI
MRO & Manufacturing
Cirrus Aircraft Breaks Ground on $8M Engine Run-Up Center
Cirrus Aircraft begins construction on a 15,000-sq-ft Engine Run-Up Center in Duluth, MN, set to open summer 2027.
Cirrus Aircraft has commenced construction on an $8 million, 15,000-square-foot Engine Run-Up Center in Duluth, Minnesota, moving critical engine testing and fuel calibration processes into a year-round, climate-controlled environment.
The new facility, detailed in a company press release on October 23, 2026, is designed to support the certification process for the SR Series, Vision Jet, and TRAC10 aircraft while reducing noise at the surrounding airport.
Centralizing certification operations
The Engine Run-Up Center will consolidate several final-phase manufacturing steps into a single enclosed building. The facility will house two calibration stalls dedicated to engine setup and testing, utilizing an 8-foot exhaust collector to ventilate the spaces. A separate climate-controlled control room will allow technicians to conduct data analysis during the testing phase.
In addition to the testing stalls, the building will include two stalls specifically engineered for fueling and defueling aircraft. These areas incorporate specialized fire protection systems and are designed to meet requirements for handling flammable fluids.
Cirrus Chief Executive Officer Zean Nielsen stated that engine run-ups and fuel system calibration are essential processes across aircraft manufacturing. He noted that the modern facility will allow the company to streamline these critical operations, improve efficiency, and provide team members with a dedicated environment to perform the work.
Expanding the Duluth manufacturing footprint
The new testing center adds to an existing corporate footprint that exceeds 1.3 million square feet. The majority of this infrastructure is located in Duluth, which serves as the primary production hub for the manufacturer.
Founded in 1984 and now publicly traded on the Hong Kong Stock Exchange, Cirrus has manufactured more than 12,000 SR Series piston aircraft and Vision Jets to date. The groundbreaking follows closely on a major program milestone for the company. On October 21, 2026, Cirrus celebrated the 10-year anniversary of Federal Aviation Administration (FAA) type certification for the Vision Jet, the first single-engine personal jet to reach the market.
Patrick Waddick, President of Innovation & Operations at Cirrus, highlighted the scale of the company’s historical output in Duluth. He noted that the new facility expands a footprint where the company has produced its entire fleet of over 12,000 aircraft, adding that the manufacturer has spent decades challenging conventions through innovations that transform personal aviation.
Project timeline and operational impact
Construction on the Engine Run-Up Center is underway, with the facility expected to open and become fully operational by the summer of 2027. By moving engine testing indoors, the company anticipates a reduction in noise levels for the surrounding airport environment, a common challenge for manufacturers conducting high-power engine runs on open ramps.
The $8 million investment reflects broader efforts by the airframer to scale production capabilities in response to market requirements. Nielsen indicated that as the company continues to grow, investments in manufacturing infrastructure position Cirrus to meet customer demand while maintaining high standards of quality and safety.
Photo Credit: Cirrus Aircraft
-
Newsletter7 days agoAirPro News Weekly: 12 October – 19 October 2026
-
Defense & Military7 days agoUSAF Renews PTC Servigistics Contract for ESCAPE Program
-
Business Aviation2 days agoDTA Aircraft JP1 eVTOL Targets April 2027 US Flight Testing
-
Business Aviation2 days agoUniversal Aviation Rebrands as Affinity Aviation at NBAA 2026
-
Aircraft Orders & Deliveries5 days agoFAA Certifies Boeing 737 MAX 10 for Commercial Service