Connect with us

Training & Certification

U.S. Air Force Accepts First 8 Boeing T-7A Training Simulators

The Air Force accepted eight T-7A Ground Based Training System devices on June 12, 2026, initiating aircrew training at Joint Base San Antonio-Randolph.

Published

on

The U.S. Air Force officially accepted the first eight Boeing T-7A Ground Based Training System devices at Joint Base San Antonio-Randolph in Texas on June 12, 2026, clearing the way for initial maintenance and aircrew training.

According to a June 24 press release from the Air Force Life Cycle Management Center (AFLCMC), the formal transfer of the simulators to the Air Education and Training Command (AETC) marks a critical step for the T-7A Red Hawk Advanced Pilot Training program. The T-7 architecture is the first combined aircraft and simulator system designed from its inception with Embedded Training and Integrated Live, Virtual, and Constructive (I-LVC) capabilities.

A defining feature of the system is its “one-push” software architecture. The simulators utilize the exact same operational flight Software as the physical aircraft. This design allows student pilots to interact with identical pilot-vehicle interfaces on the ground before they transition to live flight.

Transitioning to operational training

The initial eight Ground Based Training System (GBTS) units and their associated support equipment began arriving at Joint Base San Antonio-Randolph in October 2025. Following months of setup and testing, the official acceptance triggers the next phase of the program’s deployment.

“The official transfer of the devices to AETC leads into the start of Type 1 Maintenance and Aircrew Training,” said Michael Casey, Training Systems Branch Chief for the T-7 Red Hawk Division at AFLCMC. “This training is the next step in preparations to support Initial Operational Test & Evaluation and the eventual start of advanced pilot training.”

The Air Force plans to acquire a total of 46 GBTS units. Deliveries for the remaining 38 devices are scheduled between 2027 and 2035. These units will be distributed to other pilot training installations, including Columbus, Laughlin, Vance, and Sheppard Air Force Bases.

Production approval and strategic focus

The simulator acceptance follows a major programmatic hurdle cleared earlier in the year. On April 23, 2026, the T-7A Red Hawk program received Milestone C approval, authorizing low-rate initial production (LRIP). Following this approval, the Air Force awarded Boeing a $219 million Contracts covering the first 14 aircraft, along with spares and support equipment, according to reporting by Defense News.

While the Air Force program advances, Boeing has opted to limit the T-7A’s immediate expansion into other military branches. On the same day the Air Force accepted the simulators, Boeing confirmed it would not submit the T-7A for the U.S. Navy’s Undergraduate Jet Training System (UJTS) competition, which seeks a replacement for the T-45 Goshawk. Breaking Defense reported that a Boeing spokesperson cited the Navy’s specific engine qualification requirements for the F404 powerplant. Meeting those requirements would necessitate a long-cycle development effort, which Boeing determined would hamper the ability to quickly reach initial operational capability for the Navy.

AirPro News analysis

We view the “one-push” software architecture as the most consequential element of the T-7A training system. Historically, military flight training programs have struggled with configuration disparities between physical aircraft and ground-based simulators. When an aircraft receives a block upgrade, simulators often lag behind, forcing instructors to teach workarounds for software discrepancies. By utilizing identical operational flight software across both domains, the T-7A program eliminates this training friction.

Additionally, Boeing’s decision to withdraw from the Navy UJTS competition suggests a strategic prioritization. By avoiding a complex, parallel development track for a navalized engine variant, the Manufacturers can focus its engineering resources entirely on executing the Air Force LRIP contract and resolving any remaining technical hurdles in the baseline T-7A program.

Sources: Air Force Life Cycle Management Center

Photo Credit: Air Force Life Cycle Management Center

Continue Reading
Click to comment

Leave a Reply

Training & Certification

Bombardier Safety Standdown 2026 Marks 30th Anniversary

Bombardier opens registration for its 30th annual Safety Standdown, a free seminar on Nov. 10-12, 2026, in Wichita and online.

Published

on

Bombardier has opened registration for the 30th annual Safety Standdown, a free industry-wide aviation safety seminar scheduled for November 10 through November 12, 2026, in Wichita, Kansas, and online.

Announced in a press release on September 21, 2026, the milestone event marks three decades of the manufacturer’s knowledge-based safety training initiative. The 2026 seminar, themed “Evolution Fueled by Legacy,” aims to leverage historical aviation experiences to build more resilient safety cultures across corporate, commercial, and military flight operations.

Three decades of safety advocacy

Conceived in 1996 by a group of Learjet demonstration pilots in Wichita, the Safety Standdown was initially designed to make their specific team the safest in the industry. The program has since expanded globally to serve the broader aviation community. The event remains open to all aviation professionals, including flight crews, maintenance technicians, flight dispatchers, and schedulers, regardless of the aircraft type they operate.

According to Bombardier, more than 10,000 aviation professionals have attended the seminars worldwide since the program’s inception. Chris Milligan, Vice President of Pre-owned Aircraft Services and Flight Operations at Bombardier, highlighted the event’s longevity and purpose.

“For 30 years, Bombardier’s Safety Standdown has provided aviation professionals with invaluable opportunities to glean new perspectives on safety, helping them evolve and grow in every aspect of flight operations,” Milligan stated.

2026 seminar details and speaker lineup

The 2026 event will take place in person at the Hyatt Regency Hotel in Wichita, with virtual attendance options available for international participants. The seminar remains completely free of charge, supported by Bombardier, an advisory council, and industry sponsors to ensure accessibility for organizations of all sizes.

The agenda features several prominent aviation and safety experts. Keynote speaker Dr. Tony Kern, CEO of Convergent Performance, will address attendees alongside Ivan Pupulidy, PhD, from the University of Alabama at Birmingham. The lineup also includes retired United States Marine Corps Major Jermaine Cadogan and Tim Wade, Corporate Director of Environmental, Health & Safety at Flexjet.

AirPro News analysis

The continued investment in the Safety Standdown highlights a broader industry shift toward proactive safety management systems and human factors training. By keeping the event free and aircraft-agnostic, Bombardier maintains a unique position in corporate aviation safety advocacy. While the manufacturer supports a global fleet of more than 5,200 aircraft, opening this training to operators of competing platforms fosters a collaborative approach to safety that benefits the entire aerospace sector. We view this 30-year milestone as a testament to the enduring value of shared safety data and cross-organizational training in reducing aviation incidents.

Sources: Bombardier

Photo Credit: Bombardier

Continue Reading

Training & Certification

Airbus and ALT Academy Partner on Africa MRO Training

Airbus and ALT Academy signed an MoU to build aircraft maintenance training capacity in South Africa amid a projected shortfall of 30,000 mechanics.

Published

on

South African aviation training organization ALT Academy and European aerospace manufacturer Airbus signed a Memorandum of Understanding on September 16, 2026, to jointly develop aircraft maintenance training programs aimed at closing the continent’s persistent maintenance, repair, and overhaul (MRO) capacity gap.

The agreement, formalized at the Africa Aerospace and Defence (AAD) Expo 2026 in the City of Tshwane, South Africa, seeks to align academic instruction with current industry requirements. According to a press release issued by ALT Academy, the partnership will focus on creating a pipeline of highly skilled aviation maintenance professionals to support Africa’s growing aviation ecosystem.

Addressing Africa’s MRO capacity shortfall

The African Airlines Association (AFRAA) identified insufficient MRO capacity and a shortage of skilled personnel as primary challenges for regional operators during the African MRO Conference in Addis Ababa earlier in 2026. The reliance on off-continent maintenance facilities currently results in higher costs and extended aircraft downtime for African airlines.

According to reporting by the Uganda Broadcasting Corporation, Airbus forecasts that Africa will require 30,000 new aircraft mechanics over the next 20 years to sustain its fleet growth and operational demands. The new MoU aims to address this specific shortfall by bridging the gap between foundational academic training and the technical requirements of modern aircraft maintenance.

Nam-Binh Hoang, Airbus Country Representative in South Africa, stated in the release that the partnership combines the manufacturer’s learning solutions with ALT Academy’s practical education focus to meet the evolving demands of the sector.

Expanding regional training infrastructure

The Airbus MoU follows a separate strategic expansion announced by ALT Academy on September 11, 2026. According to African Pilot, the organization partnered with WECAIR to launch a professional pilot training program spanning the United States, Europe, and Africa, culminating in a European Union Aviation Safety Agency (EASA) license. The dual focus on pilot and maintenance training indicates a broader effort to localize aviation skills development within South Africa.

Ryan van Wijk, CEO of ALT Academy, emphasized the necessity of manufacturer involvement in technical education to ensure regulatory and safety standards are met.

“Modern aircraft demand a level of technical training that is difficult to build in isolation. This partnership is an important step in our commitment to building practical, high-quality maintenance training capacity in South Africa, and it gives us the opportunity to explore how current manufacturer knowledge and learning solutions can be made more accessible to learners and to industry, while holding a firm line on safety, quality and regulatory requirements, for the benefit of operators across the continent.”

AirPro News analysis

We view the ALT Academy and Airbus partnership as a pragmatic step toward addressing a critical bottleneck in African aviation. While aircraft orders from African carriers have increased, the localized infrastructure required to maintain those fleets has lagged. By embedding original equipment manufacturer (OEM) standards directly into regional training curricula, this initiative could reduce the long-term dependency on European and Middle Eastern MRO providers. The success of the MoU will depend on the speed at which these training frameworks can be operationalized and scaled to meet the projected demand for 30,000 mechanics over the next two decades.

Sources: EPT Aviation / ALT Academy

Photo Credit: EPT Aviation

Continue Reading

Training & Certification

HAVELSAN Expands 737 MAX and A320 Simulator Orderbooks

HAVELSAN grows its Boeing 737 MAX and A320 simulator orderbooks while building a new Ankara facility with 30-unit annual capacity.

Published

on

Türkiye-headquartered flight simulator manufacturer HAVELSAN is rapidly expanding its commercial aviation training footprint, securing new orders for its Boeing 737 MAX and Airbus A320 family full flight simulators while constructing a high-capacity production facility in Ankara.

In press releases issued on August 31 and September 1, 2026, the company confirmed its Boeing 737 MAX full flight simulator (FFS) orderbook has grown to five devices. Concurrently, HAVELSAN announced orders for six additional Airbus A320 family training devices, building on the five A320 simulators it already has in operation.

Narrowbody simulator orderbook growth

The recent orderbook expansion is heavily supported by Turkish Airlines (TK). Following the delivery of its latest order for two devices, the national carrier will operate five HAVELSAN-built Boeing 737 MAX simulators.

HAVELSAN noted that eight different airlines and pilot training centers have conducted evaluation fly-outs on its Boeing 737 MAX FFS. All of the manufacturer’s full flight simulators currently in operation have achieved European Union Aviation Safety Agency (EASA”>EASA) qualification, a critical regulatory benchmark for international sales.

Infrastructure expansion in Ankara

To support the growing backlog of its STARLINE simulator portfolio, HAVELSAN is executing a major infrastructure investment. In March 2026, the company broke ground on a new 17,000-square-meter Simulator Production and Integration Facility in Ankara.

Scheduled to enter service in 2027, the new plant will allow the company to produce up to 30 simulators annually. The facility is designed to support the simultaneous development and integration of 16 devices. Once operational, HAVELSAN’s total infrastructure capacity in Ankara will reach 40 commercial and military simulators.

Strategic market positioning

The narrowbody simulator announcements follow a major July 2026 agreement with Turkish Airlines for 12 new training devices, comprising eight full flight simulators and four flight training devices. That agreement also marked HAVELSAN’s strategic entry into the wide-body aircraft simulation market.

Beyond its domestic market, the company is actively targeting international operators. HAVELSAN recently showcased its STARLINE portfolio at the Asia Pacific Aviation Training Summit (APATS) 2026 in Singapore, aiming to capture demand from Asia-Pacific carriers expanding their narrowbody fleets.

AirPro News analysis

We view HAVELSAN’s concurrent investments in production capacity and EASA qualification as a clear strategy to transition from a regional defense supplier into a global commercial aviation training provider. By scaling its manufacturing infrastructure to support 30 simulators annually, the company is positioning itself to compete directly for narrowbody training contracts against established tier-one simulator manufacturers. The entry into wide-body simulation with Turkish Airlines will likely serve as a critical proof of concept for future international campaigns.

Sources: HAVELSAN (Boeing 737 MAX), HAVELSAN (Airbus A320)

Photo Credit: HAVELSAN

Continue Reading
Every coffee directly supports the work behind the headlines.

Support AirPro News!

Advertisement

Follow Us

newsletter

Latest

Categories

Tags

Every coffee directly supports the work behind the headlines.

Support AirPro News!

Popular News