Regulations & Safety

SAS A320neo Wrong Taxiway Takeoff Incident at Brussels Airport

A SAS Airbus A320neo nearly took off from a taxiway at Brussels Airport, aborted at 127 knots with no injuries. Preliminary AAIU report details contributing factors.

Published

on

This article is based on an official preliminary report from the Belgian Air Accident Investigation Unit (AAIU).

SAS A320neo Narrowly Avoids Disaster in High-Speed Taxiway Takeoff Incident at Brussels Airport

On March 6, 2026, the Belgian Air Accident Investigation Unit (AAIU) released a preliminary report detailing a severe aviation incident that occurred at Brussels Airport (BRU). According to the official AAIU documentation, on the evening of February 5, 2026, a Scandinavian Airlines (SAS) Airbus A320neo mistakenly attempted to take off from a parallel taxiway instead of its assigned runway. The aircraft reached a high speed before the flight crew realized the error and executed an emergency rejected takeoff (RTO).

The AAIU has officially classified the event as a “Serious Incident” under ICAO Annex 13 due to the high probability of an accident. The aircraft, operating as Flight SK2590 to Copenhagen with 165 passengers and crew on board, narrowly avoided a catastrophic collision with temporary fences and nearby aviation fuel storage tanks. Fortunately, no injuries were reported, and passengers were safely transported back to the terminal.

We have reviewed the preliminary findings, which highlight a complex “Swiss cheese” alignment of environmental, technical, and human factors. The report emphasizes that multiple overlapping issues contributed to the crew’s loss of situational awareness, rather than a single point of failure.

The Sequence of Events: A High-Speed Near-Miss

Misalignment and Acceleration

According to the AAIU timeline, the incident unfolded between 21:00 and 21:04 local time. The flight crew was cleared to take off from Runway 07R via an intersection designated as C6, rather than utilizing the full length of the runway. Operating in total darkness, the crew mistook taxiway “Outer 10” for intersection C6 and subsequently aligned the Airbus A320neo with Taxiway E1, which runs parallel to the active runway.

The preliminary report states that the crew initiated the takeoff roll down the taxiway, accelerating rapidly. The aircraft reached an Indicated Airspeed (IAS) of 127 knots (approximately 146 mph). The AAIU notes that the critical “V1” speed, the velocity beyond which a takeoff can no longer be safely aborted, was calculated at 132 knots for this specific flight, placing the aircraft just 5 knots away from the point of no return.

The Critical Abort and Evasive Action

As the aircraft accelerated down Taxiway E1, the First Officer noticed that the forward visual perspective appeared unusually narrow and that the Captain was not responding to standard operating procedure callouts. Realizing the aircraft was not on the runway, the First Officer intervened.

“Stop, stop, stop, stop.”

, First Officer, SAS Flight SK2590, as recorded in the AAIU preliminary report.

At 21:04:09, the Captain immediately aborted the takeoff by applying full reverse thrust and maximum braking. The AAIU report details that at the moment the abort was initiated, the aircraft had only about 520 meters (1,705 feet) of taxiway remaining before it would have collided with temporary fences. While still moving at roughly 40 knots, the First Officer instructed a right turn to avoid the approaching barriers. The aircraft came to a complete halt in just 14 seconds, stopping near the intersection of taxiways V1 and C1, mere meters from the runway guard lights and the airport’s fuel storage farm.

Contributing Factors Identified by Investigators

Environmental and Infrastructure Challenges

The AAIU preliminary report does not assign blame but rather identifies several contributing factors. Environmental conditions played a significant role; the incident occurred after civil twilight in total darkness. Furthermore, the runway and taxiway surfaces were wet, which the AAIU notes caused glare and made painted ground markings highly difficult to read.

Infrastructure and procedural elements also compounded the risk. The specific intersection is officially designated as a “hot spot”, an area with a known history or high risk of runway incursions. The AAIU report highlights that the illumination for a crucial intersection sign was inoperable at the time. Additionally, the red stop bar lights at the taxiway/runway intersection extinguished before the crew arrived at the holding point, depriving the pilots of a critical visual reference.

Equipment and Air Traffic Control Context

According to the investigation, the SAS Airbus A320neo was not equipped with optional safety software such as the Runway Awareness and Advisory System (RAAS), Airbus Runway Overrun Prevention System (ROPS), or Take-Off Surveillance 2 (TOS2). While aviation regulators do not currently mandate these systems, their absence is noted in the report as they are designed to provide auditory and visual alerts if a takeoff is attempted from a taxiway.

From an Air Traffic Control (ATC) perspective, the AAIU notes that the control tower supervisor had combined the ground and air frequencies. A single air traffic controller was managing both frequencies and dividing their attention among seven different aircraft. Following the report’s release, Belgium’s ATC agency, Skeyes, publicly stated that this staffing arrangement strictly adhered to existing safety guidelines for that time of night and emphasized their full cooperation with the investigation under a “Just Culture” framework.

AirPro News analysis

We note that this incident serves as a textbook example of the critical importance of modern Crew Resource Management (CRM). Historically, steep cockpit hierarchies often prevented junior First Officers from correcting senior Captains, sometimes with fatal results. In this instance, the First Officer’s immediate, assertive command directly prevented a disaster, demonstrating that modern CRM training is functioning exactly as intended.

Furthermore, the absence of systems like RAAS or TOS2 on the incident aircraft highlights an ongoing industry debate. While airlines are legally compliant without these systems, wrong-surface events remain a persistent threat in commercial aviation. As the AAIU continues its investigation, we anticipate that the final report may include safety recommendations urging broader adoption of these technological safety nets, especially for operations at complex airports during low-visibility conditions.

Frequently Asked Questions (FAQ)

Were there any injuries on SAS Flight SK2590?
No. According to the AAIU report, all 165 passengers and crew members were unharmed and safely transported back to the terminal via bus. The aircraft sustained only minor tire and landing gear damage due to high-speed braking.

How fast was the aircraft traveling before the abort?
The AAIU confirmed the aircraft reached 127 knots Indicated Airspeed (IAS) on the taxiway. The V1 speed (the speed at which takeoff must continue) was 132 knots.

When will the final investigation report be released?
The current AAIU report is strictly preliminary. A final report, which will include binding safety recommendations, is expected to be published in approximately one year, likely in early 2027.


Sources:
Belgian Air Accident Investigation Unit (AAIU) Preliminary Report: AAIU-2026-02-05-01

Photo Credit: Belgian Air Accident Investigation Unit

Leave a ReplyCancel reply

Popular News

Exit mobile version